Audizio RP113 Series Record Player

Model Numbers: 102.060, 102.064, 102.065

Introduction

Congratulations on the purchase of this Audizio product. Please read this manual thoroughly prior to using the unit to benefit fully from all features.

Read the manual prior to using the unit. Follow the instructions to avoid invalidating the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician to avoid electrical shock. Keep the manual for future reference.

Safety Precautions

Ask advice from a specialist before using the unit. A slight smell may occur on first use, which is normal and will disappear.
Do NOT open the housing as it contains voltage-carrying parts.
Do not place metal objects or pour liquids into the unit to prevent electrical shock and malfunction.
Do not place the unit near heat sources or on vibrating surfaces. Do not cover ventilation holes.
The unit is not suitable for continuous use.
Handle the mains lead carefully; a faulty lead can cause shock or malfunction.
Always pull the plug, never the lead, when unplugging.
Do not plug or unplug with wet hands.
Damaged plugs or leads must be replaced by a qualified technician.
If the unit is damaged and internal parts are visible, do NOT plug it in or switch it on. Contact your dealer.
Do not connect to a rheostat or dimmer.
Protect the unit from rain and moisture to avoid fire and shock hazards.
All repairs should be done by a qualified technician.
Connect to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
Unplug during thunderstorms or when not in use for extended periods.
If the unit has been stored for a long time, condensation may occur. Let it reach room temperature before switching on.
Never use the unit in humid rooms or outdoors.
Follow applicable guidelines and instructions to prevent accidents in companies.
Do not repeatedly switch the unit on and off; this shortens its lifespan.
Keep the unit out of reach of children and do not leave it unattended.
Do not use cleaning sprays on switches; residues can cause dust and grease deposits. Seek specialist advice for malfunctions.
Do not force controls.
Keep the unit at least 60cm away from computers or TVs due to potential magnetic fields.
If the product has a built-in lead-acid battery, recharge it every 3 months if not used for a long period to prevent permanent damage.
Replace damaged batteries with the same specifications and dispose of them environmentally friendly.
If the unit is dropped, have it checked by a qualified technician before switching it on again.
Do not use chemicals for cleaning; use a dry cloth only.
Keep away from electronic equipment that may cause interference.
Use only original spares for repairs to avoid serious damage or dangerous radiation.
Switch off before unplugging. Unplug all leads and cables before moving.
Ensure the mains lead is not damaged by people walking on it. Check the lead before each use.
Verify mains voltage (220-240Vac/50Hz) matches your outlet.
Keep original packing material for safe transport.
High voltage warning: ⚡ This mark indicates high voltages inside the housing that can cause electric shock.
Important instruction warning: ⚠️ This mark indicates important instructions in the manual that must be read and followed.
The unit is CE certified; modifications will invalidate the CE certificate and guarantee.
NOTE: Operate in rooms with temperatures between 5°C/41°F and 35°C/95°F for normal function.
Dispose of electric products responsibly at recycling centers.

Unpacking Instructions

Carefully unpack the box. Check contents for completeness and condition. Notify shipper and retain packaging if damaged. Save original packaging for returns. If exposed to drastic temperature changes, do not switch on immediately; allow it to reach room temperature to prevent condensation damage.

Power Supply

Check the label on the back/underside for the correct mains voltage (100-240VAC 50/60Hz). Connecting to a different voltage may cause irreparable damage. Connect directly to mains; do not use dimmers or adjustable power supplies. Always connect to a protected circuit (breaker or fuse) and ensure proper grounding to avoid shock or fire hazards.

Controls and Connections

The record player features the following controls and connections:

1. Headphone Output: 3.5mm headphone jack.
2. On/Off and Volume Control: Rotate to power on/off and adjust volume.
3. Mode: Rotate to select mode (USB, AUX, Phono, BT streaming).
4. Pitch: Rotate to control turntable speed.
5. USB Slot: For USB drives.
6. Previous / BT Out: Press to go to the previous track (USB, AUX, BT). In Phono mode, press to connect to a BT speaker/headphones.
7. Play/Pause / REC: Press to play/pause (USB, AUX, BT). In Phono mode, press to record vinyl to USB (if inserted).
8. Next / Split: Press to skip to the next track (USB, AUX, BT). During recording, press to cut and save the current file, or generate another file.
9. Line Output: RCA connector for external speakers (not included).
10. AUX Input: 3.5mm auxiliary input jack.
11. DC 5V IN: 5V power socket for the supplied adapter.
12. Platter: The rotating disc for records.
13. 45rpm Adapter: For playing 45RPM records.
14. Tone Arm Lever: Use to raise or lower the tone arm.
15. 33/45/78 RPM Switch: Selects the turntable speed.
16. Autostop Switch ON/OFF: Enables/disables the automatic stop function. When ON, the platter starts when the tone arm is placed over the record and stops at the end. If records don't stop automatically, set to OFF.
17. Tone Arm: The arm holding the stylus.
18. Arm Clip: Secures the tone arm when not in use. Designed to stay up when unlocked.
19. Stylus Cartridge: Contains the stylus/needle.

Diagram Description: The record player is a rectangular unit with a turntable in the center. On the top front-left are the headphone jack (1), on/off/volume knob (2), mode dial (3), and pitch dial (4). On the top front-right are USB slot (5), track/BT buttons (6, 8), play/pause/REC button (7), line out (9), AUX in (10), and DC 5V IN (11). The platter (12) is visible with the tone arm (17) resting on its support, secured by the arm clip (18). The tone arm lever (14) is near the arm. The speed selector (15) and autostop switch (16) are located on the base near the platter. The 45rpm adapter (13) is shown separately.

Getting Started

Remove the record player from its packaging. Plug in the power adapter and turn on the device (use only the supplied adapter). Rotate the mode switch to Phono mode. Place a record on the turntable, using the 45rpm adapter if needed. Select the playback speed (33, 45, or 78rpm). Turn the on/off/volume knob clockwise to power on. Ensure the stylus protective cover is removed. Unlock the tone arm by releasing the clip, then raise it with the lever. Position the stylus over the first track; the turntable will start automatically. Slowly lower the stylus onto the record using the lever. The turntable will stop automatically at the end of the record if the autostop switch is ON. If it's OFF, it will continue spinning. Lift the tone arm with the lever and place it on its rest. Lock the arm with the clip. Replace the stylus cover. Turn off the power.

Bluetooth Streaming

Pairing as Receiver: To play music from a BT device, pair the devices. Set the mode switch to BT mode; the LED will blink blue. Turn on BT streaming on your device; it will scan for devices. Select "Audizio RP113". Once paired, the LED will be solid blue. You can now play music from your device using the turntable as a speaker.

Pairing as Transmitter: This unit can also transmit audio via BT to external speakers or headphones. In Phono mode, press the "previous" button (indicator blinks red). Turn on BT streaming on your speaker/headphones and start pairing. A successful connection stops the indicator blinking. Vinyl playback will be transmitted wirelessly. Adjust volume on the external device; the turntable's volume control is then blocked. Note: When used as a BT speaker, other playback functions are disabled.

AUX IN

Connect an external audio device or smartphone using a 3.5mm cable to the AUX IN jack. Set the mode switch to AUX mode. Play music on the connected device; sound will output from the turntable.

USB Operation

Playback: Insert a USB drive into the USB slot. The device will play files automatically. Use "previous" or "next" to change tracks. Use "play/pause" to start/pause playback.

Recording: Insert a USB drive. Start vinyl playback in Phono mode. Press "REC" during playback (indicator blinks red/blue). Press "split" during recording to cut and save the current file, generating another file. Press "REC" again to stop recording.

Technical Specifications

Playback Options: BT streaming, USB
Input Connections: 3.5mm Jack, USB
Output Connections: 3.5mm Jack, RCA
Speed Settings (RPM): 33, 45, 78
Power Supply: 100-240VAC 50/60Hz (5V Adapter)
Dimensions (L x W x H): 335 x 305 x 120mm
Weight: 2.65 kg

Specifications are typical and may vary slightly between units. Specifications are subject to change without prior notice.

This product conforms to European Community Directives.

	Audizio Avola Digital Music System Instruction Manual Comprehensive instruction manual for the Audizio Avola Digital Music System, covering setup, features, troubleshooting, and specifications for this multi-functional audio device.
	Audizio RP330 Series Record Player with Speakers BT - Instruction Manual Comprehensive instruction manual for the Audizio RP330 Series Record Player and Speakers BT. Learn how to set up, operate, and connect your turntable for optimal audio playback via Phono or Bluetooth.
	Audizio RP315 Record Player HQ Black Instruction Manual This manual provides instructions for the Audizio RP315 Record Player HQ Black, covering unpacking, product overview, phono operation, and Bluetooth connectivity.
	Audizio Genua DAB+ Radio Instruction Manual Comprehensive instruction manual for the Audizio Genua DAB+ Radio, detailing setup, features like DAB+, FM, Bluetooth, USB, AUX input, system settings, and safety guidelines.
	Audizio MILAN DAB+ Radio Instruction Manual Comprehensive instruction manual for the Audizio MILAN DAB+ Radio, covering setup, operation, features like DAB and FM modes, Bluetooth playback, and troubleshooting.
	Audizio Fremont Table Record Player Instruction Manual A comprehensive guide for the Audizio Fremont Table Record Player, covering setup, operation, Bluetooth connectivity, computer connection for recording with Audacity, and technical specifications.
	Audizio Avio DAB+ Radio: Instruction Manual and User Guide Comprehensive instruction manual for the Audizio Avio DAB+ Radio, covering setup, controls, features like DAB/FM radio, Bluetooth, USB, alarms, and system settings. Learn how to operate your Audizio radio safely and effectively.
	Audizio Vieste DAB+ Radio: Instruction Manual Comprehensive instruction manual for the Audizio Vieste DAB+ Radio. Learn about setup, features, and safe operation in multiple languages.