J.Burrows Wireless Ergonomic Keyboard And Mouse Combo

Specifications

• Wireless Technology: 2.4GHz RF
• Working Range: Up to 10 metres
• Battery Type: (2) AAA Batteries per device
• Keyboard Layout: 122-Key US
• Key Type: Membrane
• Keyboard Hotkeys: 17 Hotkeys (Windows, Internet and Multimedia)
• Keyboard Indicators: Battery Low, Num Lock & Caps Lock
• Keyboard Dimensions: 19.8" x 8.3" x 1" (503 x 212 x 25 mm)
• Mouse Tracking Method: Optical Sensor
• Mouse DPI: 3 Levels - 800, 1200 (Default), 1600
• Mouse Dimensions: 4.5" x 2.9" x 1.5" (115 x 74 x 38mm)

Requirements

• Operating System: Windows® 10/8/7/XP, Mac OS X 10.7 or later
• Connectivity: Spare USB port for wireless receiver

Contents

The package includes:

• A: Wireless Keyboard
• B: Wireless Mouse
• C: Wireless Receiver
• D: AAA Batteries (4)
• E: Instruction Manual

Mouse Description

The mouse features:

• Left Button
• Right Button
• Scrolling Wheel
• DPI Switch Button
• Low Battery Indicator
• Forward Button
• Backward Button
• Optical Sensor (on the bottom)
• Power Switch (OFF/ON)
• Battery Compartment (on the bottom)
• Connect Button (on the bottom)

Keyboard Description

The keyboard includes:

• Standard QWERTY key layout
• Numeric keypad
• Function keys (F1-F12)
• Internet & Multimedia Hotkeys (refer to Hotkey Definitions section for details)
• Indicators for Num Lock, Caps Lock, and Battery Low
• Dedicated keys for Calculator, Sleep, Wake Up, and Power Off
• Connect Button
• Power Switch
• Battery Compartment (on the bottom)

Installation

1. Battery Installation:
   • Remove the battery cover from the mouse and keyboard battery compartments.
   • Insert (2) AAA batteries into each device, observing correct polarity.
   • Close the battery compartment covers.
2. Power On: Turn both the keyboard and mouse power switches to the ON position.
3. Computer Setup:
   • Turn on your computer and allow it to load completely.
   • Plug the USB wireless receiver into an available USB port on your computer.
4. Connection: The receiver will automatically connect with the wireless keyboard and mouse. No drivers are required.

NOTE: If devices do not connect efficiently, press the "CONNECT" button on the bottom of the device and re-pair. Refer to Troubleshooting Point 3.

Tips

• When the low battery LED is illuminated, it indicates that new batteries are required.
• To conserve battery life, turn off the devices when leaving your desk for extended periods (more than an hour).

Troubleshooting

If your keyboard or mouse cannot be operated, please try the following:

1. Ensure that two AAA batteries are correctly inserted into the battery compartments and that the power switches for both the keyboard and mouse are turned ON.
2. Verify that the USB receiver is properly connected to a computer USB port. To minimize interference during pairing/connecting, move other devices at least 30 cm away from the receiver.
3. To reconnect keyboard or mouse to USB receiver: Plug the USB receiver into the computer and press the "CONNECT" button on the bottom of the keyboard or mouse within 15 seconds. For optimal connection, ensure the keyboard or mouse is close to the USB receiver, with a distance of no more than 30 cm between them.
4. For the mouse, press and hold the middle and right buttons simultaneously after pressing the "CONNECT" button.

Note: Wireless phones, routers, and other devices operating on the 2.4GHz frequency may cause interference with wireless keyboards and mice. Please relocate such wireless appliances away from your keyboard and mouse.

Hotkey Definitions

* Hotkey functions are based on the Windows operating system. When used on Mac, these may vary or not function.