TWINS3 Quick Start Guide
Fresh 'n Rebel
Find the Full Manual Online
The complete user manual is available in multiple languages on the Fresh 'n Rebel website.
Visit: www.freshnrebel.com
Let's Get Started
Diagram showing the Fresh 'n Rebel Twins3 charging case and earbuds. The case is open, revealing two earbuds and a battery indicator with four dots. Below, the closed charging case is shown with labels pointing to: 'Reset button', 'Charging port', and 'Charging LED'.
First Time Pairing
Press and hold the reset button for 5 seconds before connecting your device for the first time to your Twins3. Every next time you take the earbuds out of the charging box, they will automatically turn on and connect to your phone within seconds. When you put them back, they will disconnect and turn off.
Step A: Press and hold the reset button on the charging case for 5 seconds. ? PRESS 5 sec
Step B: On your device, go to Bluetooth settings. Select 'TWINS 3' to connect. ? Bluetooth TWINS 3 CONNECT
Touch Controls
- Play/Pause: Tap either the left (L) or right (R) earbud twice (2x).
- Activate Voice Assistant: Tap either the left (L) or right (R) earbud three times (3x).
- Previous Song: Press and hold either the left (L) or right (R) earbud for 2 seconds.
- Next Song: Press and hold either the left (L) or right (R) earbud for 2 seconds.
- Answer/End Call: Tap either the left (L) or right (R) earbud twice (2x).
- Decline Call: Press and hold either the left (L) or right (R) earbud for 2 seconds.
LED Behaviour
Earbuds
- Blinking very slowly ➡️ Connected
- Blinking ➡️ Earbuds are reconnecting to each other
- Blinking very fast ➡️ Searching for connection
Case (outside)
- Blinking very slowly ➡️ Charging with cable or wirelessly
- On ➡️ Done charging
Case (inside) - Battery Indicator
- 1 LED blinking ➡️ Case needs to be charged
- 1 LED (0-25%) ➡️ Battery remaining in case
- 2 LEDs (25-50%) ➡️ Battery remaining in case
- 3 LEDs (50-75%) ➡️ Battery remaining in case
- 4 LEDs (75-100%) ➡️ Battery remaining in case
Features
- Playtime (earbuds): 6 hours
- In-ear sensors: Automatically pause/play music when earbuds are inserted or removed. ?➡️▶️/⏸️
- Recharging earbuds: 1.5 hours ?⚡
- Total playtime (with case): 27 hours (at average use for music and phone calls at 50% volume). ? + ?️ = 27 HOURS
- Double Master: Use the left and right earbuds separately or together. ?↔️?
- Wired & Wireless Charging: Supports charging via USB-C cable (included) and wireless charging (charging pad not included). ? [wireless charging pad symbol]
FAQ
What is Double Master?
- The Double Master functionality means that both earbuds have a built-in microphone, allowing you to use them individually (either right or left) or as a pair for stereo sound.
- Single Master means you can use only the right earbud individually, or the right and left earbuds together. The left earbud cannot be used separately from the right.
I can't seem to get touch control to work, what should I do?
- Aim for the LED and try touching with a bit more force.
My earbuds don't turn off automatically when I put them back in the charging case, what can I do?
- Check if 1 LED is blinking inside the charging case. This indicates the battery level is too low to automatically turn off the earbuds. Charge the case, and the issue will be solved.
One of my earbuds doesn't work anymore, what can I do?
- Place both earbuds back in the charging case, close the case, and wait 10 seconds before trying again. ? in ?️ ⏱️ 10 sec.
How can I reset my Twins3?
- Hold the reset button until the outside LED is blinking 3 times. Your Twins3 will reset.
Declaration of Conformity
Sitecom declares that this radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.freshnrebel.com. Operating frequency band: 2400 to 2483.5 MHz. Maximum radio-frequency power transmitted: 4.6 dBm / 5 mW.
This declaration is also available in Dutch, German, Italian, Spanish, Portuguese, French, Polish, Romanian, and Greek on the website.