ProtoArc MECH KM200 User Manual

The ProtoArc MECH KM200 is a full-size wireless mechanical keyboard and mouse combo designed for versatility and comfort.

Keyboard Features

• Type-C Charging Port: For convenient charging.
• Power Switch: Located for easy access.
• Multimedia Function Keys: Dedicated keys for various media controls and shortcuts (detailed below).
• Indicator Lights:
  • Caps Lock: White Indicator Light
  • Num Lock: White Indicator Light

Mouse Features

The mouse is ergonomically designed with multiple buttons and indicator lights.

• A: Left Button
• B: Right Button
• C: Scroll Wheel Button
• D: DPI Switch Button: Allows adjustment of mouse sensitivity.
• E: Indicator Lights:
  • Low Battery: Red Light
  • Pairing: White Light
  • Charging: Blue Light
  • DPI: Red Light (Indicates current DPI setting)
• F: Type-C Charging Port
• G: Power Switch
• H: USB Receiver: Stores at the bottom of the mouse when not in use.
• I: Forward Button
• J: Backward Button

Follow these steps to connect your keyboard and mouse wirelessly:

1. Turn on the power switch located on the bottom of both the keyboard and mouse. [Power Symbol]
2. Take out the USB receiver from the bottom of the mouse.
3. Insert the USB receiver into an available USB port on your computer.
4. Once the receiver is connected, the keyboard and mouse are ready for use.

Keep your devices powered up with the included Type-C cable.

1. Low Battery Indicator: When the battery is low, the red indicator light on the mouse will start flashing. This continues until the keyboard/mouse is turned off.
2. Charging Process: Insert the USB-A end of the cable into your computer's USB port and the Type-C end into the keyboard or mouse. The blue indicator light will stay on constantly while charging.
3. Charging Time: A full charging cycle takes approximately 2 to 3 hours.
4. Fully Charged Indicator: Once the keyboard and mouse are fully charged, the blue charging indicator light will automatically turn off.

The keyboard features dedicated multimedia keys for quick access to common functions. Some F1-F12 functions require pressing the 'FN' key simultaneously.

Keyboard Parameters:

Mouse Parameters:

To conserve power, the keyboard automatically enters sleep mode when inactive.

1. Entry: When the keyboard has no activity for more than 5 seconds, it will automatically enter sleep mode, and the indicator light will turn off.
2. Wake Up: To wake up the keyboard, simply press any key. It will be ready for use within 3 seconds, and the indicator light will turn on again.

• ▶️ 1 x Wireless Keyboard
• ▶️ 1 x Wireless Mouse
• ▶️ 1 x Type C Charging Cable
• ▶️ 1 x User Manual

1. Keyboard and Mouse Not Working or Pairing Issues:
   • Please charge the keyboard and mouse immediately.
   • For keyboard pairing: Press and hold the ESC + K keys simultaneously for more than 3 seconds. The white indicator light will illuminate when the 2.4G pairing is successful. Keep the USB receiver and keyboard within a distance of approximately 10cm. Insert the receiver into a USB port on your computer. Once the white indicator light turns off, it should work normally.
   • For mouse pairing: Turn the power switch on the bottom of the mouse to the ON position. Simultaneously, press and hold the left, middle, and right buttons for more than 3 seconds until the red indicator light under the scroll wheel illuminates. Keep the USB receiver and mouse within a distance of approximately 10cm. After inserting the receiver into a USB port on your computer, the red indicator light will turn off, indicating that it is ready for normal operation.
2. Mac OS Compatibility:

   The ProtoArc MECH KM200 supports basic functions on Mac OS systems. However, it is not compatible with some multimedia and special key combination features.

3. Mechanical Switch Replacement:

   The mechanical switches on this keyboard are soldered and cannot be replaced by customers. However, the keycaps can be replaced with standard cross-shaped keycaps.