User Manual for EKOBOR models including: E10101-ES02, I-Standing Desk Single Motor, E10101-ES02 I-Standing Desk Single Motor

I-STANDING SINGLE MOTOR CODE MANUAL

User Manual for I-Standing

Catalogues – EKOBOR

Catalogues and User Guide – EKOBOR Ergonomic Furniture

I-Standing 用戶手冊

資源下載 – EKOBOR

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 86.51KB

Document Document

I-STANDING DESK SINGLE MOTOR
User Manual
1.Touch Button Instruction
Led display Memory Setting UP Down 2. Reset Operation (RST)
Press the DOWN button for 30-40 seconds, kindly ensure not obstacles underneath the desk, continue to descend until it shows the lowest height which is 75cm.
3. Memory Function
To use the memory positions, set the desk to the desired height press "S," AND THEN PRESS 1, 2, 3 OR 4. The correct height will then be stored to the corresponding number.
4. Lock & Unlock Operation
Lockhold touch"S"+"" for 5s,indicator show "LOC", this means system has been locked ,can not do any operation. Unlockhold touch"S"+"" for 5s,when indicator shows "LOC"change to normal figure ,this means system is unlocked.
5. "HOT" - Overheat
If indicator show HOT, it means system is overheat or continuously work over 2 minutes. It should wait 18mins for rest until the digital shows the height figure.
6. Height limit
Keep pressing ""+"" for 5 secondsit can set the height limit position. It can be canceled with same method.
7. Reminder time to stand and sit!
Keep pressing "1+3" for 5 seconds and it shows "0.0h," press "up" button to change the time, press one time is 0.5h (30 minutes), press twice is 1.0h (60 minutes), when the time is over, it will appear a beep tone.