MyOLG Online – OLG Reseller Online Ordering
Installation Guide for OLG models including: OLG407 Modulus Single Post Pedestal Table, OLG407, Modulus Single Post Pedestal Table, Single Post Pedestal Table, Pedestal Table
Modulus All Black Round Meeting Table – Ideal Furniture
File Info : application/pdf, 4 Pages, 756.06KB
DocumentDocumentModulus Single Post Pedestal Table Installation Guide TOOLS REQUIRED: Powered screwdriver. myolgoffice.com Modulus Single Post Pedestal Table INSTALLATION GUIDE COMPONENTS 1 Steel Plate x1 2 Feet Tube x1 3 Large Foot x4 4 Cross Collar x1 5 Foot Glides x4 6 Cross Gasket x1 7 Table Top x1 SCREWS 8 M5x20mm Self Tapping x4 9 M8x16mm x4 10 M10x110mm x1 11 M8x30mm x3 11 8 7 1 2 4 6 9 10 3 5 myolgoffice.com Modulus Single Post Pedestal Table INSTALLATION GUIDE 01 02 Slide the 4 large feet into the cross collar. Place the cross gasket on top of the feet Screw the 4 glides into the base of the large feet, leaving the glides one turn from and collar, and tighten 4xM5 screws into the cross collar. tight (then they can be adjusted easily if the floor is uneven). 03 04 Fig A Place the feet tube into the cross collar, making sure the notch in the bottom of the tube is in-line with the bump inside the cross collar Fig A. Fully tighten the large M10 bolt, spring washer and flat washer through the gasket and collar into the tube. Locate the steel plate on top of the feet tube, and line up the 3 holes. Fully tighten the 3 screws into the tube. myolgoffice.com Modulus Single Post Pedestal Table INSTALLATION GUIDE 05 06 With the frame assembled, place it upside down onto the work surface, and measure the top from all sides to make sure it's centered. Fully tighten the last 4 self tapping screws into the work surface. myolgoffice.com