meShare 1080p Home Security Camera Setup Manual

1 Getting to Know Your Camera

This smart camera features 1080p HD resolution, a 144° wide-angle lens, and two-way audio. It is also compatible with Google Assistant and Amazon Alexa. Subscribe to meShare's Cloud Service for additional features and cloud recording.

Camera Components:

1 Status Light
2 Light Sensor
3 HD Camera
4 Microphone
5 Micro USB Port
6 Speaker

What's in the Box:

Home Security Camera
Screws & Anchors
Power Adapter
Quick Start Guide

Thank you for joining the meShare community! Our aim is to build a smarter and more secure life for you.

2 Mobile Setup

Before you begin:

Ensure a strong WiFi connection at the camera's location.
Know the SSID (WiFi network name) and password for your 2.4GHz WPA-PSK/WPA2-PSK WiFi network. Your network must not be hidden.
Your network should have at least 2Mbps upload speed for live viewing or 4Mbps upload speed for meShare Cloud Service usage per camera.
Download and install the "meShare" app from Google Play™ or the App Store™ (compatibility: iOS® 7.0+ or Android™ 4.0+).
Launch the app and sign up for a free meShare account. All your devices will be bound to this account.

Setup Steps:

Log in to the meShare app and press the "Add Device" [plus-sign] option in the upper right corner of the Home Page.
Power on your device. The status light will blink green when powered on. Tap "Start installation" to proceed.
When prompted by the app, scan the QR code displayed on your phone with the device's camera.
Turn up the volume on your phone to hear voice prompts during the setup process. Tap "Next" to proceed.
Connect your phone to the 2.4GHz WPA-PSK/WPA2-PSK WiFi network that you want your device to connect to. Ensure the network is not hidden. Tap "Next" to proceed.
Enter the password for your WiFi network. Ensure the password is correct. Tap "Next" to proceed. Note: The WiFi password is case-sensitive.
Steadily hold your phone's display in front of your meShare camera until you hear "Device connected". The distance between your phone and the camera should be about 8 inches.
Name your device and set a password for it. Tap "Next" to proceed. Note: The password provides an additional layer of security for your devices and is optional but highly recommended.
Your device has been successfully configured! Tap "Done" to finish setup. You can now share or view your device.

3 Mounting Your Camera (Optional)

Remove the three screw plugs on the bracket and keep the holes exposed.
Line the bracket against the wall and mark the appropriate holes. Drill three holes slightly smaller than the provided wall anchors. Use a hammer to gently insert the anchors into the wall, ensuring the tips are flush against the wall. Fasten the three screws through the holes on the bracket and into the anchors.

Connect the supplied power adapter to the power port and plug the adapter into a nearby power outlet. The LED status light will illuminate when the camera powers on. You can rotate the camera for a better viewing angle.

4 Viewing and Recording Options

Recording Options:

This camera is compatible with the meShare Cloud Service. For information, visit www.meshare.com/cloud. The cloud service allows you to:

Record continuously and store footage on secure cloud servers.
Create and save video clips from your recordings.
Access your footage and clips at any time from any location.
Enjoy more smart features in the future.

Viewing Options:

All meShare devices are bound to your meShare user account. Access your camera and other devices using the meShare app on any Android™ or iOS® device. Download the app from Google Play™ or the App Store™.

You can also access your devices from any web browser using the web app. Visit user.meshare.com and log in with your meShare user account information.

5 Status Light Definitions

Your camera has an LED light indicating its status. Refer to the guide below:

Solid green: The camera is powering on.
Blinking green: The camera is ready for setup.
Blinking blue: The camera is connecting to the WiFi network. Do not turn off or unplug the camera during this process.
Solid blue: The camera has successfully connected to the WiFi network.

6 Troubleshooting

If you were unable to connect your camera successfully:

Ensure you are connecting to a 2.4GHz WPA-PSK/WPA2-PSK WiFi network, and that your network is not hidden.
Verify that you entered the network name and password correctly. Note: Both are case-sensitive.
During QR code scanning, ensure your phone's display brightness is high and avoid glare on the screen.
Confirm that your camera is not already bound to another user account.

Note: The status light indicates connection status. Blinking green means no WiFi connection; solid blue means a successful WiFi connection.

7 Support

Having difficulty?

Use the Live Chat function in the meShare app for technical problems. Follow these steps:

Access the "Me" page in the lower right corner of the meShare app and select "meShare Support".
For more instructions, troubleshooting, support, and other resources, please visit: meshare.com/supports

Like us on Facebook.com/meShare

Android is a trademark of Google Inc. Google Play is a trademark of Google Inc. Apple, the Apple Logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.