Rabbit Alarm Clock User's Manual

Objects the package contains

This product is packed in a color box, which contains:

• 1x Rabbit alarm clock
• 1x Type-C data line
• 1x power adapter
• 1x instruction manual

The package includes a Rabbit Alarm Clock, a Type-C data line, a power adapter, and an instruction manual.

Product appearance & button introduction

The alarm clock features several buttons:

• ① Time button
• ② Alarm button
• ③ Volume up button
• ④ Volume down button
• ⑤ Reset button

The rear and bottom of the clock have the following ports and features:

• ⑥ Type-C power input
• ⑦ Temperature sensor
• ⑧ Alarm Horn
• ⑨ Snooze / Night light

Pre-use setting

Power on for the first time

Remove the protective film from the mirror surface. Connect the Type-C power plug to the input port of the alarm clock. Then connect the USB plug to the adapter. Finally, plug the adapter into a 100V-240V home socket.

Note:

• The Rabbit alarm clock is transported in the off state and will turn on when powered for the first time.
• The Rabbit alarm clock has a built-in lithium battery. It can work by connecting to the power adapter or independently after being fully charged.

Time setting

When powered on for the first time, the time shows AM 12:00.

1. Enter time setting: Long press the TIME button for 2 seconds. The number will blink.
2. Set current value: Click VOLUME UP and VOLUME DOWN buttons to set the current value.
3. Confirm: Click TIME button to confirm.
4. Setting sequence: Year - Month - Day - Hour - Minute - Temperature display mode (°C/°F).
5. Switch 12/24-hour display: After time setting is complete, click the TIME button to switch between 12-hour and 24-hour display formats.

Note:

• The day of the week will automatically adjust based on the year, month, and day.
• Temperature display mode switching can only be done in time setting mode, allowing selection between Celsius or Fahrenheit.

Alarm setting

Enter alarm setting: Long press the ALARM button for 2 seconds.

• In alarm setting mode, the number will blink. Click VOLUME UP and VOLUME DOWN buttons to set the desired value.
• Press the ALARM button to confirm.
• The setting sequence is: Hour - Minute - Working mode (weekday/all 7 days).

Note:

• The alarm will turn on automatically after setting. When the alarm is on, an alarm icon will be displayed on the screen.
• The alarm function can be turned on or off by clicking the alarm button.

Volume setting

Click the VOLUME UP and VOLUME DOWN buttons to set an appropriate key-press volume and alarm volume.

• In time display state, click VOLUME UP and VOLUME DOWN buttons to set the key-press volume and alarm volume.

Note:

• There are 4 volume levels that can be adjusted.
• The alarm volume is consistent with the key-press volume and cannot be set separately.

How to SNOOZE or TURN OFF alarm

After the alarm clock is turned on, it will ring at the preset time. When the alarm goes off, you can do the following:

1. Snooze

Click the SNOOZE button once when the alarm goes off to enter "Snooze Mode". The alarm icon will blink, and the alarm will ring again after 9 minutes.

Note: You can enter snooze mode up to 3 times for one alarm.

2. Stop today's alarm

• When the alarm goes off, click any button at the bottom of the alarm clock to stop today's alarm. It will go off on the next setting day.
• When the alarm goes off, double-click the SNOOZE button to stop today's alarm. It will go off on the next setting day.
• When in "Snooze Mode", click the SNOOZE button once to stop today's alarm. It will go off on the next setting day.

Night light mode

1. Night light mode

In time display state, press the SNOOZE button to turn on the night light.

2. Night light brightness adjustment

In night light mode, long press the SNOOZE button for 3 seconds. The night light brightness will change from bright to dark, or dark to bright (two levels available).

Note: The night light will stay on once turned on and will not turn off automatically unless manually switched off or power is lost.

Trouble Shooting

1. What should I do when the rabbit alarm clock's system crashes?

If you encounter a system crash or an unsolvable problem, first try clicking the reset button at the bottom of the alarm clock with a small stick. After clicking, the alarm clock will return to its initial state (screen displays 12 AM). You will need to reset the time, alarm, and other functions.

2. What if the reset button can't solve the problem?

Missing accessories or any other problems, please contact: ThreeDucksDirect@outlook.com

To activate lifetime warranty, please visit: www.jall-us.com