Instructions for Guardian models including: G1806, G1806LH, G1806LH Brass Eyewash Deck Mounted, G1806LH, Brass Eyewash Deck Mounted, Eyewash Deck Mounted, Deck Mounted, Mounted
Guardian Eyewash Manual Pdf - Installation, Operation and Maintenance Guide
Guardian Equipment 8-3/8 x 1/2 x 1/2 in. Deckmount Eye Wash with 90 Degree Swivel | Ferguson
F G1806 Eyewash, Deck Mounted, 90° Swivel, Right Hand Mounting F G1806LH Eyewash, Deck Mounted, 90° Swivel, Left Hand Mounting F G1806LH F G1806 Eyewashes Application: Eyewash for mounting on counter next to sink. Spray heads swivel 90 degrees from storage to operational position. Water flow is activated by flag handle. Spray Head Assembly: Two GS-PlusTM spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from the water flow. Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Mounting: Unit may be mounted on right side (G1806) or left side (G1806LH) of sink. Furnished with locknut and washer for securing unit to countertop. Construction: Polished chrome plated brass. Supply: 1/2" NPT male inlet. Sign: ANSI-compliant identification sign. Quality Assurance: Unit is completely assembled and water tested prior to shipment. Available Options F G6020 Thermostatic mixing valve precisely blends hot and cold water to deliver tepid water as required by ANSI Z358.1-2014. Refer to "Thermostatic Mixing Valves" section for complete technical and product selection information. Guardian Equipment 1140 N North Branch St Chicago, IL 60642 312 447 8100 TELEPHONE 312 447 8101 FACSIMILE gesafety.com Listed 8116. Units have been tested to and comply with ANSI Z358.1-2014 and the Uniform Plumbing Code. F G1806 Eyewash, Deck Mounted, 90° Swivel, Right Hand Mounting F G1806LH Eyewash, Deck Mounted, 90° Swivel, Left Hand Mounting Eyewashes F G1806LH F G1806 STORAGE POSITION 3" (76mm) 4 7/8" (124mm) 12 1/4" (308mm) 6 1/2" (165mm) 8" (203mm) (2) GS-PLUSTM SPRAY HEADS POWDER COATED CAST ALUMINUM FLAG HANDLE 8 1/4" (210mm) 4 3/4" (121mm) NOTES: 1. EACH GS-PLUSTM SPRAY HEAD HAS A "FLIP-TOP" DUST COVER, INTERNAL FLOW CONTROL AND FILTER TO REMOVE IMPURITIES FROM THE WATER FLOW. 2. SECURE UNIT TO COUNTER USING MOUNTING SHANK AND LOCKNUT. THIS SPACE FOR ARCHITECT/ENGINEER APPROVAL 90° SWIVEL FITTING 1/2" IPS CHROME PLATED BRASS STAY-OPEN BALL VALVE 2 5/8" (67mm) Due to continuing product improvement, the information contained in this document is subject to change without notice. All dimensions are ± 1/4" (6mm). rev. 080918 Guardian Equipment 1140 N North Branch St Chicago, IL 60642 312 447 8100 TELEPHONE 312 447 8101 FACSIMILE gesafety.com 1 7/8" (48mm) PROVIDE Ø7/8" (22mm) MOUNTING HOLE IN DECK 1/2" NPT MALE INLET Sign Included Eyewash Listed 8116. Units have been tested to and comply with ANSI Z358.1-2014 and the Uniform Plumbing Code.Adobe PDF Library 16.0 Adobe InDesign 16.4 (Windows)