Anko Earphone TWS - Operating Instructions

12 Month Warranty

Kmart Australia Ltd warrants this product to be free from defects in materials and workmanship for the period stated, provided it is used in accordance with accompanying recommendations or instructions. This warranty is in addition to your rights under the Australian Consumer Law. Kmart will provide a refund, repair, or exchange for defective products. Claims and expenses for returning the product can be addressed to the Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.

For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

Warning:

• Charge Bluetooth earbuds only with the supplied charging unit.
• Battery should not be subjected to extreme temperatures or low air pressure at high altitudes.
• Do not replace the battery with an incorrect type, as this may result in an explosion or leakage of flammable liquid or gas.
• Do not dispose of the battery in fire or a hot oven, or crush or cut it mechanically, as this can result in an explosion.
• Do not leave the battery in an extremely high temperature surrounding environment, as this can result in an explosion or leakage.
• A battery subjected to extremely low air pressure may result in an explosion or leakage.

Product Overview

Includes:

• TWS Earphones
• Charging Cable
• Extra S/L size Eartips

Function Overview:

• LED Indicator: Indicates charging and pairing status.
• MF Button: Multi-function button for play/pause, answer/end call, next/previous track, and redial.
• Built-in Microphone: For calls.
• USB Charging Port: For charging the case.

[Image: Diagram showing the earphone and charging case with labels for LED indicator, MF button, built-in microphone, and USB charging port.]

How to Use These Earphones

Pairing the Earphones with Bluetooth Devices

1. Go to "Bluetooth Settings" on your Bluetooth device (phone, tablet, etc.).
2. Turn Bluetooth ON.
3. Open the charging case and remove the Earphones. They will automatically turn on. The LED indicators on both earphones will flash blue and red as they sync. Once synced, one earphone will slowly flash blue, indicating pairing mode.
4. On your Bluetooth device, select the pairing name "anko 43026715" from the list of available devices.
5. The Earphone LED indicator will slowly flash blue once connected.

Troubleshooting Tip: If the earphones do not connect, turn them OFF, turn your device's Bluetooth OFF and ON again, then repeat the pairing process.

Re-syncing Earphones

If the earphones fail to sync automatically:

1. Remove both earphones from the charging case, ensuring they are turned ON.
2. Double-click both right and left earphone buttons in quick succession to re-sync.
3. To cancel pairing of both earbuds when not paired with devices, double-click both buttons.
4. Place the earphones back into the charging case, then repeat the pairing process.

Answering Incoming Call

• When there is an incoming call, playback will pause and the unit will ring.
• To answer or end a call, press either earphone MF button once.
• To decline an incoming call, press and hold either MF button for 2 seconds.

Playing Music

• Press either earphone MF button once to pause or resume playback.
• Press the left MF button three times to play the previous track.
• Press the right MF button three times to play the next track.
• Press and hold the right MF button for 1-2 seconds to increase volume.
• Press and hold the left MF button for 1-2 seconds to decrease volume.

Battery Charging

1. Connect the USB-C charging cable to the charging case.
2. Plug the cable into a standard USB 5V power output.
3. The LED indicator will flash red while charging and turn blue when fully charged.
4. Note: Fully charge the battery before first use. A full charge takes approximately 2 hours.
5. Unplug the charging cable from the power socket when fully charged.

Note: The charging case will stop working when the battery is low.

[Image: Picture of Anko Earphone TWS in its charging case.]

Specifications

Non-play automatic power save mode: After 30 seconds of inactivity, the earphones enter power save mode and automatically switch off when the low battery alarm sounds.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc., and any use of such marks by KMART AUSTRALIA is under license.