Huawei Solar Inverter Conformity and Technical Data
Manufacturer: HUAWEI TECHNOLOGIES CO., LTD.
Product Type: SOLAR INVERTER
Models: SUN2000-100KTL-M2, SUN2000-115KTL-M2
Certificate Number: A3 50564049 0001
Report Number: CN224DKW 001
Date of Issue: 04.11.2022
Certificate of Conformity
This document confirms that a sample of the specified technical equipment has been tested and found to be in accordance with relevant requirements.
The verification of conformity refers to the product mentioned above and confirms its compliance with the assessment requirements. This verification does not imply an assessment of the production of the product and does not permit the use of a TÜV Rheinland mark of conformity.
Product Identification and Standards
Manufacturer: HUAWEI TECHNOLOGIES CO., LTD.
Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129 Guangdong, P.R. China
Type of Product: SOLAR INVERTER
Model Designation: SUN2000-100KTL-M2, SUN2000-115KTL-M2
Firmware Version: V500R023
Software Version: V500R023C00SPC010
Standards Applied:
- VDE-AR-N 4105:2018-11
- DIN VDE V 0124-100 (VDE V 0124-100):2020-06
Test Report Summaries
The document includes summaries and data from various test reports:
- A3 Grid Code Certificate: Confirms compliance with grid code requirements.
- E.5 Test Report "System Reactions" for power generation units with feeding current: Details network reaction tests, including rapid voltage changes and flicker.
- E.6 Certificate of NS protection: Confirms compliance with national protection (NA-Schutz) requirements.
- E.7 Requirements for the test report for NS protection: Outlines specific protection settings tested, such as overvoltage, undervoltage, and frequency protection.
Technical Data: Network Reaction (E.5)
This section details the system's reaction to network disturbances, including rapid voltage changes and flicker, as well as harmonic emissions.
Rapid Voltage Changes (System Reactions)
The following table shows the system's reaction (represented by 'ki' values) to different voltage change scenarios:
Scenario | Model: SUN2000-100KTL-M2 | Model: SUN2000-115KTL-M2 |
---|---|---|
Einschalten ohne Vorgabe (zum Primärenergieträger) / Marking operation without default (to primary energy carrier) | ki= 1.003 | ki= 1.106 |
Einschalten bei Nennbedingungen (des primärenergieträger) / Marking operation at reference conditions (of primary energy carrier) | ki= 1.106 | ki= 1.054 |
Ausschalten bei Nennleistung / Breaking operation at nominal power | ki= 1.054 | kimax= 1.106 |
Schlechtester Wert aller Schaltvorgänge / Worst case value of all switching operations | kimax= 1.106 |
Flicker
The following table shows the flicker coefficient (CY) of the system at different network impedance angles (Ψk):
Netzimpedanzwinkel Ψk / Angle of network impedance Ψk | 30° | 50° | 70° | 85° |
---|---|---|---|---|
Anlagenflickerbeiwert CV / System flicker coefficient CY | 0.020 | 0.015 | 0.020 | 0.005 |
Harmonics (Model: SUN2000-115KTL-M2)
The following table details the harmonic current emissions (Iv/In [%]) at various active power levels (P/Pn [%]):
Harmonic number | P/Pn [%] | 0% | 10% | 20% | 30% | 40% | 50% | 60% | 70% | 80% | 90% | 100% |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Iv/In [%] | 0.560 | 0.186 | 0.109 | 0.121 | 0.145 | 0.139 | 0.120 | 0.114 | 0.115 | 0.126 | 0.124 |
2 | Iv/In [%] | 0.688 | 0.144 | 0.054 | 0.079 | 0.137 | 0.099 | 0.153 | 0.119 | 0.150 | 0.107 | 0.101 |
3 | Iv/In [%] | 1.328 | 0.290 | 0.138 | 0.101 | 0.084 | 0.077 | 0.063 | 0.070 | 0.051 | 0.032 | 0.029 |
4 | Iv/In [%] | 0.834 | 0.185 | 0.203 | 0.139 | 0.181 | 0.112 | 0.331 | 0.184 | 0.118 | 0.275 | 0.444 |
5 | Iv/In [%] | 1.194 | 0.290 | 0.134 | 0.086 | 0.078 | 0.069 | 0.053 | 0.068 | 0.060 | 0.046 | 0.048 |
6 | Iv/In [%] | 0.856 | 0.206 | 0.200 | 0.125 | 0.169 | 0.155 | 0.234 | 0.100 | 0.133 | 0.242 | 0.453 |
7 | Iv/In [%] | 0.796 | 0.185 | 0.086 | 0.056 | 0.046 | 0.036 | 0.028 | 0.019 | 0.025 | 0.026 | 0.021 |
8 | Iv/In [%] | 0.467 | 0.083 | 0.041 | 0.028 | 0.064 | 0.111 | 0.053 | 0.060 | 0.033 | 0.035 | 0.066 |
9 | Iv/In [%] | 0.258 | 0.067 | 0.035 | 0.022 | 0.018 | 0.022 | 0.016 | 0.015 | 0.014 | 0.015 | 0.023 |
10 | Iv/In [%] | 0.429 | 0.110 | 0.063 | 0.081 | 0.099 | 0.129 | 0.134 | 0.086 | 0.077 | 0.205 | 0.104 |
11 | Iv/In [%] | 0.249 | 0.071 | 0.028 | 0.020 | 0.015 | 0.016 | 0.017 | 0.017 | 0.017 | 0.019 | 0.013 |
12 | Iv/In [%] | 0.329 | 0.082 | 0.048 | 0.053 | 0.047 | 0.126 | 0.124 | 0.077 | 0.066 | 0.128 | 0.144 |
13 | Iv/In [%] | 0.398 | 0.083 | 0.041 | 0.027 | 0.025 | 0.026 | 0.020 | 0.022 | 0.014 | 0.016 | 0.020 |
14 | Iv/In [%] | 0.628 | 0.083 | 0.053 | 0.025 | 0.035 | 0.064 | 0.062 | 0.034 | 0.042 | 0.037 | 0.037 |
15 | Iv/In [%] | 0.288 | 0.064 | 0.033 | 0.019 | 0.015 | 0.016 | 0.013 | 0.011 | 0.010 | 0.012 | 0.015 |
16 | Iv/In [%] | 0.655 | 0.134 | 0.111 | 0.138 | 0.148 | 0.181 | 0.210 | 0.144 | 0.116 | 0.119 | 0.147 |
17 | Iv/In [%] | 0.275 | 0.063 | 0.026 | 0.018 | 0.016 | 0.015 | 0.012 | 0.012 | 0.012 | 0.013 | 0.010 |
18 | Iv/In [%] | 0.352 | 0.082 | 0.083 | 0.095 | 0.111 | 0.106 | 0.141 | 0.107 | 0.108 | 0.126 | 0.164 |
19 | Iv/In [%] | 0.238 | 0.050 | 0.025 | 0.020 | 0.017 | 0.016 | 0.014 | 0.012 | 0.013 | 0.012 | 0.012 |
20 | Iv/In [%] | 0.653 | 0.097 | 0.061 | 0.050 | 0.086 | 0.068 | 0.075 | 0.048 | 0.068 | 0.070 | 0.065 |
21 | Iv/In [%] | 0.298 | 0.064 | 0.030 | 0.040 | 0.026 | 0.024 | 0.015 | 0.014 | 0.011 | 0.013 | 0.013 |
22 | Iv/In [%] | 0.723 | 0.094 | 0.079 | 0.099 | 0.151 | 0.170 | 0.173 | 0.159 | 0.129 | 0.108 | 0.158 |
23 | Iv/In [%] | 0.307 | 0.070 | 0.040 | 0.047 | 0.034 | 0.030 | 0.023 | 0.022 | 0.016 | 0.017 | 0.010 |
24 | Iv/In [%] | 0.178 | 0.172 | 0.210 | 0.191 | 0.157 | 0.172 | 0.210 | 0.191 | 0.157 | 0.172 | 0.210 |
25 | Iv/In [%] | 0.264 | 0.061 | 0.031 | 0.021 | 0.016 | 0.015 | 0.019 | 0.015 | 0.014 | 0.012 | 0.012 |
26 | Iv/In [%] | 0.667 | 0.158 | 0.085 | 0.092 | 0.123 | 0.233 | 0.218 | 0.237 | 0.234 | 0.200 | 0.160 |
27 | Iv/In [%] | 0.663 | 0.158 | 0.085 | 0.092 | 0.123 | 0.233 | 0.218 | 0.237 | 0.234 | 0.200 | 0.160 |
28 | Iv/In [%] | 0.667 | 0.155 | 0.042 | 0.022 | 0.016 | 0.015 | 0.012 | 0.013 | 0.015 | 0.021 | 0.018 |
29 | Iv/In [%] | 0.959 | 0.174 | 0.074 | 0.092 | 0.135 | 0.203 | 0.172 | 0.167 | 0.148 | 0.151 | 0.186 |
30 | Iv/In [%] | 0.282 | 0.076 | 0.032 | 0.022 | 0.017 | 0.016 | 0.014 | 0.014 | 0.017 | 0.020 | 0.020 |
31 | Iv/In [%] | 0.663 | 0.158 | 0.085 | 0.092 | 0.123 | 0.233 | 0.218 | 0.237 | 0.234 | 0.200 | 0.160 |
32 | Iv/In [%] | 0.264 | 0.061 | 0.031 | 0.021 | 0.016 | 0.015 | 0.019 | 0.015 | 0.014 | 0.012 | 0.012 |
33 | Iv/In [%] | 1.268 | 0.210 | 0.094 | 0.042 | 0.051 | 0.058 | 0.075 | 0.093 | 0.075 | 0.071 | 0.097 |
34 | Iv/In [%] | 0.266 | 0.059 | 0.030 | 0.020 | 0.018 | 0.014 | 0.013 | 0.013 | 0.017 | 0.012 | |
35 | Iv/In [%] | 1.219 | 0.149 | 0.055 | 0.082 | 0.135 | 0.176 | 0.178 | 0.182 | 0.159 | 0.173 | 0.204 |
36 | Iv/In [%] | 0.268 | 0.062 | 0.028 | 0.020 | 0.018 | 0.016 | 0.014 | 0.016 | 0.016 | 0.021 | 0.017 |
37 | Iv/In [%] | 0.648 | 0.249 | 0.092 | 0.084 | 0.140 | 0.219 | 0.208 | 0.223 | 0.233 | 0.194 | 0.136 |
38 | Iv/In [%] | 0.253 | 0.063 | 0.027 | 0.018 | 0.016 | 0.016 | 0.015 | 0.017 | 0.016 | 0.018 | 0.021 |
39 | Iv/In [%] | 1.311 | 0.314 | 0.183 | 0.088 | 0.037 | 0.026 | 0.065 | 0.074 | 0.066 | 0.058 | 0.068 |
40 | Iv/In [%] | 0.364 | 0.086 | 0.035 | 0.020 | 0.015 | 0.016 | 0.014 | 0.015 | 0.020 | 0.027 | 0.022 |
Remark: The maximal value of three phases is selected.
Technical Data: NS Protection (E.6 & E.7)
This section details the requirements and settings for the Network Protection (NA-Schutz) of the solar inverters.
Network Connection Rule: VDE-AR-N 4105: 2018-11 "Erzeugungsanlagen am Niederspannungsnetz" (Requirements for connection and parallel operation of generation plants at the low-voltage grid)
Test Requirement: DIN VDE V 0124-100 (VDE V 0124-100):2020-06 "Netzintegration von Erzeugungsanlagen - Niederspannung" (Test requirements for generation plants intended for connection and parallel operation at the low-voltage grid)
Protection Settings
The following table outlines the tested protection settings for voltage and frequency:
Protection Function | Setting | Response Value | Response Time | Model: SUN2000-100KTL-M2 | Model: SUN2000-115KTL-M2 | |
---|---|---|---|---|---|---|
Spannungsschutz (Überspannungsschutz) / Voltage protection (Overvoltage protection) | Einschleusen / Connect | 1.15 * Un | < 100ms | 1.15 * Un | 280.4 V | < 100ms |
Ausschleusen / Disconnect | 1.25 * Un | < 100ms | 1.1 * Un | 253.0 V | < 100ms | |
Spannungsschutz (Unterspannungsschutz) / Voltage protection (Undervoltage protection) | Einschleusen / Connect | 0.8 * Un | < 100ms | 0.8 * Un | 184.8 V | < 100ms |
Ausschleusen / Disconnect | 0.7 * Un | < 100ms | 0.7 * Un | 160.6 V | < 100ms | |
Frequenzschutz (Oberfrequenzschutz) / Frequency protection (Overfrequency protection) | Ausschleusen / Disconnect | 51.5 Hz | < 100ms | 51.5 Hz | 51.5 Hz | < 100ms |
Frequenzschutz (Unterfrequenzschutz) / Frequency protection (Underfrequency protection) | Ausschleusen / Disconnect | 47.5 Hz | < 100ms | 47.5 Hz | 47.5 Hz | < 100ms |
Note: The test results are based on the time frame of the grid connection rule and refer to the connection and parallel operation of generation plants at the low-voltage grid.
Type NA-Schutz / Type of NS protection: Integrated NS protection (Zugeordnet zu Erzeugungseinheit Typ / Assigned to power generation unit of type: SUN2000-100KTL-M2, SUN2000-115KTL-M2)
Manufacturer of Integrated NS Protection: Xiamen Hengjia Electronic Co., Ltd.
Accreditation and Certification Bodies
The tests and certifications were performed by TÜV Rheinland, an accredited testing and certification body. The accreditation is confirmed by DAkkS (Deutsche Akkreditierungsstelle) under the number D-ZE-14169-01-02.
Certification Body: TÜV Rheinland LGA Products GmbH, Tillystraße 2, 90431 Nürnberg, Germany.