Itron Cellular 500W Remote Module Installation Guide

This guide provides comprehensive instructions for the installation and setup of the Itron Cellular 500W Remote Module (ECW-1700-002). This module is designed to collect consumption, event, and alarm data from water registers and meters.

Introduction to the Cellular 500W Remote Module

The Itron Cellular 500W Remote Module is an advanced cellular radio frequency transmitting module that interfaces with water registers and meters. It is engineered to capture and transmit crucial data, including consumption usage, events, and alarms. This module is IPv6-compliant and supports communication over Itron's OpenWay multi-purpose IoT solution, as well as the legacy ChoiceConnect™ Mobile platform.

The Cellular 500W modules are shipped in a 'Factory Mode' to prevent unauthorized radio transmissions during transit. Upon successful installation and programming, these modules automatically acquire and transmit meter data according to the configured settings. They are designed to be compatible with a wide range of meter manufacturers' registers. For a detailed list of supported meters and registers, consult the Water Meter and Telemetry Module Compatibility Matrix.

Key Features and Capabilities

  • Datalogging: Offers extensive interval data storage, configurable from 1 minute to 1 hour, supporting both Network Mode and Mobile Mode operations.
  • Transmission Modes: Operates efficiently in either Network Mode or Mobile Mode, with various power and transmission rate options to optimize battery life and data reporting.
  • Mobile High Power Mode: Provides an extended battery life of up to 20 years with high-powered RF messages transmitted every 60 seconds.
  • Mobile and Handheld Mode: Transmits medium-powered RF messages every 15 seconds, also with an expected battery life of 20 years.
  • Optional Hard-to-Read Mode: Offers a higher-powered RF message every 30 seconds, with a reduced battery life of 15 years, suitable for challenging installation environments.
  • Leak and Reverse Flow Detection: Incorporates sophisticated algorithms for detecting water leaks and reverse flow, enhancing system monitoring.
  • Optional Leak Sensor: Analyzes water flow sound patterns to identify leaks, with data reported to the mlogonline Network Leak Monitoring portal.
  • Optional Remote Disconnect Valve: Enables utilities to remotely manage customer water disconnections and reconnections, reducing operational costs.

Important Information and Support

For detailed installation procedures, troubleshooting, and safety information, please refer to the full documentation. Itron provides comprehensive support through its online portal, Itron Access (https://access.itron.com). For technical assistance, contact Itron Technical Support Services via email at support@itron.com or by phone.

For more information about Itron products and services, visit www.itron.com.

Models: 500C, EWQ500C, Cellular 500W, Remote Module, Cellular 500W Remote Module

File Info : application/pdf, 44 Pages, 1.04MB

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=5540885 madbuild

Related Documents

Preview Itron Cellular 500W Module Pit Installation Guide
Comprehensive guide for installing the Itron Cellular 500W Module in pit applications. Covers safety, compliance, features, and step-by-step installation procedures for utility meter communication systems.
Preview Itron OpenWay CENTRON Meter: Smart Grid Technology
Comprehensive overview of the Itron OpenWay CENTRON meter, a smart meter designed for the residential mass market, detailing its advanced features, technical specifications, and integration capabilities for modern smart grids.
Preview Itron ACT2 Meter Module: Installation and Certification Guide
This document provides certification information, installation guidelines, and technical specifications for the Itron ACT2 Meter Module, used with the OpenWay Riva CENTRON electric meter. It covers FCC and ISED Canada regulatory compliance, antenna specifications, cabling recommendations, and step-by-step installation procedures.
Preview Itron 100G ERT Module Installation Guide
A comprehensive guide for installing the Itron 100G ERT module on various natural gas meters, covering transmission modes, specifications, meter compatibility, and detailed installation procedures for American meters.
Preview Itron G5R1 Module Technical Reference Guide
This technical reference guide provides detailed information on the Itron G5R1 Communications Module, designed for Itron electricity meters. It covers installation, regulatory compliance (FCC/ISED), operational descriptions, and technical specifications for this utility meter component.
Preview Itron 100W/100W+ Datalogging ERT Modules: Features and Compatibility
Overview of Itron 100W and 100W+ Datalogging ERT® Modules, detailing model specifications, enhanced security, SCM+ messaging, and compatibility with Itron collection systems and software.
Preview Itron ACE SL7000 Industrial & Substation Electricity Meter Range
Discover the Itron ACE SL7000 meter range, a versatile and flexible solution for industrial and substation electricity metering. Featuring advanced communication technology, multi-energy inputs, and compliance with IEC standards, it's designed to meet the demands of modern energy markets.
Preview ITRON Intelis wSource EU863-870 MHz Band Test Report by 7layers GmbH
This test report details the performance and compliance of the ITRON Intelis wSource device for the EU863-870 MHz band, conducted by 7layers GmbH. It covers LoRaWAN certification requirements.