Manuals+

SonicWall NSa 2700 Power Supply Installation and Replacement

This document provides instructions for installing or removing a power supply in your NSa 2700 network security appliance. Review the Safety, Regulatory and Legal Information document provided with the NSa 2700 appliance.

Rear View of NSa 2700 Appliance

The rear view of the NSa 2700 appliance shows two power supply locations, labeled "Redundant" and "Primary".

Installing the Power Supply into the Appliance

WARNING: Do not install anything except the NSa 2700 Power Supply into the NSa 2700 appliance.

To install a new NSa 2700 Power Supply:

  1. Using a Phillips screwdriver, remove the screw securing the top to the power supply compartment.
  2. Slide the top toward the back of the appliance and then lift to remove, exposing the power supply compartment.
  3. Remove the thumbscrew holding the bracket and remove the bracket from the compartment.
  4. Plug the cord from the power supply into the matching interface in the back corner.
  5. Place the power supply in the compartment.
  6. Secure the bracket with the thumbscrew.
  7. Wrap the cord so it lies in the space beside the power supply.
  8. Place the top over the compartment, ensuring that the hook on the side goes into the matching slot, and slide into place. Secure the cover with the screw.
  9. Connect the external power cord to the power supply.
  10. Connect the other end of the cord to a power source.

Removing the Power Supply from the Appliance

WARNING: Power supply surfaces can be hot. Handle and store with care until the surfaces are cool.

  1. Remove the screw from the power supply compartment cover and slide the cover off.
  2. Remove the thumbscrew holding the bracket against the power supply.
  3. Remove the bracket.
  4. Unwrap the cable ties, if present.
  5. Unplug the internal power connector.
  6. Remove the power supply.

Product Compatibility and Information

This power supply module is for use with SonicWall appliances indicated below. Use of this module with a SonicWall appliance that is not approved will void the warranty for that appliance. This module is provided as a replacement power supply, and is provided on an "as is" basis without warranty of any kind.

This power supply, 02-SSC-3078 SONICWALL NSA2700 / TZ670 / TZ570 SERIES FRU POWER SUPPLY, is approved for use with: 02-SSC-4324 SONICWALL NSA 2700.

For information and related documents, visit the SonicWall support website: https://www.sonicwall.com/support

Models: NSA 2700 Power Supply, NSA 2700, Power Supply

File Info : application/pdf, 2 Pages, 548.85KB

PDF preview unavailable. Download the PDF instead.

nsa2700-power-supply-installation-guide

References

Acrobat Distiller 17.0 (Windows)

Related Documents

Preview SonicWall SonicOS and SonicOSX 7.0.1 Release Notes
Comprehensive release notes for SonicWall SonicOS and SonicOSX version 7.0.1, detailing resolved and known issues across various firmware releases from April 2021 to March 2022, along with supported platforms and firmware versions.
Preview SonicOS 8 Diagnostics for Classic Mode Administration Guide | SonicWall
A comprehensive guide from SonicWall detailing the diagnostic tools available in SonicOS 8 Classic Mode. Learn to troubleshoot network connectivity, generate support reports, perform Pings, Trace Routes, DNS lookups, and more for effective network management.
Preview SonicWall SonicOS and SonicOSX 7.0.1 Release Notes
This document provides release notes for SonicWall SonicOS and SonicOSX version 7.0.1, detailing new features, enhancements, and resolved issues for various SonicWall network security appliances.
Preview SonicWall TZ Series Quick Start Guide: TZ670, TZ570, TZ570W, TZ570P Setup and Configuration
This Quick Start Guide provides essential information for setting up and configuring SonicWall TZ670, TZ570, TZ570W, and TZ570P next-generation firewalls. Learn about package contents, hardware overview, connectivity, power, and initial setup options including local, cloud, and mobile app management.
Preview SonicWall NSa Series: Advanced Network Security Appliances
Explore the SonicWall NSa series, offering industry-validated security effectiveness and high performance for mid-sized networks, distributed enterprises, and data centers with advanced threat prevention.
Preview SonicWall TZ Series (Gen 7) Datasheet: Next-Generation Firewalls for SMBs & Branches
Discover the SonicWall TZ Series (Gen 7) next-generation firewalls (NGFWs), engineered for SMBs and distributed branches. This datasheet details features, specifications, and deployment advantages of these integrated SD-Branch platforms.
Preview SonicWall Gen 8 NSa Series: Next-Generation Firewall for Enterprise Threat Protection
Explore the SonicWall Gen 8 NSa Series, featuring industry-leading threat prevention, simplified management, and advanced security for distributed enterprises and campuses. This datasheet covers models NSa 2800, NSa 3800, NSa 4800, and NSa 5800.
Preview SonicWall NSa 2700 Quick Start Guide
A quick start guide for setting up and configuring the SonicWall NSa 2700 network security appliance, covering package contents, front and back panel details, and various setup options including local management, cloud management, and the SonicExpress app.