Intelligent Electric Tailgate Installation Instructions

Basic Function Description of Electric Tailgate

The intelligent electric tailgate is an assembly device that can electrically complete the opening, closing, and locking of the luggage compartment door. It can be triggered via the remote control vehicle key, the opening key at the vehicle luggage compartment, the central control key in the cab, foot sensing switch, sound control switch, etc. Key features include anti-pinch, anti-collision, self-setting height adjustment, speed control, abnormal fault detection, and nondestructive installation.

• Multiple Control Modes: Offers various selectable operation modes, including the original vehicle key, an additional button on the tailgate, and buttons on the driver's seat.
• Intelligent Anti-Pinch and Anti-Collision: During lifting, the tailgate stops or reverses direction upon encountering obstacles to prevent harm to human body.
• Support Setting Door Opening Height: Users can set their preferred tailgate height based on their height or usage habits.
• Realization of Optional Function: Enables the kick sensing switch functionality.

Car Photo Comparison

Front view of vehicle body: [Image of the front of an Audi Q5L]

Rear view of vehicle body: [Image of the rear of an Audi Q5L]

Brand: Audi | Model: Q5L | Year: 2020+

Installation Diagram of Product Accessories

[Diagram showing the placement of various components: Ball joint support (L/R), Left/Right bracket, Bshim/垫片, Front switch, Kick sensor, Control box, Tailgate switch, Electric pole (R/L), Electric suction lock.]

Product Wiring Diagram

[Diagram illustrating the wiring connections for the electric tailgate system, including power supply, switches, sensors, and control box.]

Note: If the ground connection (GND) is not properly established, the host must not be powered on.

Fuse Box Power Wire: For power tailgate configuration, use a fuse of 20A or above.

TF Card Upgrade: [Indicates a slot for TF card upgrades.]

Car Trunk Buckle Signal Line: Transmission from the original vehicle interface.

Precautions Before Installation

1. Hand over installation to professional staff to avoid damage and accidents. Do not disassemble the unit without permission.
2. Consult the owner about prior modifications or repairs. Inform them about drilling and routing. Check for vehicle fault codes, door switch, sunroof switch, and remote key button functionality. Verify vehicle surfaces, tailgate gaps, and flatness for reference.
3. Ensure the car battery has sufficient power. If not, start the engine for a period to avoid affecting tailgate operation and car startup.
4. Before disassembly, remove metal objects and hard objects to prevent interior damage.
5. Use masking paper and towels to protect the car interior from scratches during installation. Place removed components properly. Handle wiring sundries promptly and insulate joints to prevent short circuits.
6. When installing the body bracket, use the special bracket if provided. Distinguish direction to avoid reverse installation, which can cause the rod to fall off or improper tailgate closure, potentially scratching the vehicle paint.
7. Determine brace direction and position before installation to avoid damage. Ensure the circlip is properly seated on the ball head; test for looseness by pulling the brace outward.
8. When taking power, use the fuse box B+ high current fuse position (not lower than 20A) and ensure it does not affect other vehicle functions. Ensure a good ground connection.
9. If perforation is required for the walking brace wire, follow the provided drilling guide. Pull the door down properly to ensure the drill bit is perpendicular to the drilling position.
10. When arranging cables (can line, power line, front key line, electric suction box connecting line), bind them with the threading device, placing larger plugs at the front. Use surface wax in the threading pipe for easier threading.
11. Do not plug or unplug leads and accessories while the power is on to avoid damaging the host or accessories.

Installation Steps

1. Remove the original left and right struts and their fixing brackets.
2. Install the left and right supports of the tailgate as shown.
3. Install the left and right supports of the vehicle body, and then install the left and right electric struts with the outlet end facing down.
4. Remove the original rear door lock mechanism and install the new electric lock mechanism, connecting the electric plug and lock control plug.
5. Remove the original rear door lock hook and install the standard lock hook.
6. Route the power cable to the main driver and connect the ground cable to the ground screw inside the triangle plate on the driver's side.
7. Remove the left pedal trim plate of the main drive. Unplug the original car's 30A normal electric safety adapter and plug in the Electrical reclaimer to get power.
8. The front operation is controlled by the original car's front button on the main driving door.
9. Drill holes on the right side of the tail door trim panel and install the special rear buttons.

Description of Electric Tailgate Control

Common Commissioning Operations of Electric Tailgate

Setting Method of Eighth Gear Acceleration and Deceleration: When opening the door, manually turn the tailgate lock to the full lock state. Within 10 seconds, briefly press the tailgate key (controller will emit 'didi' sound). The number of times to press determines the closing speed (default 3, max 8, min 1). Closing speed increases by 50% per gear. After setting, quickly open the tailgate lock using any method (handle, switch, key, front switch) to apply the setting.

Common Troubleshooting of Electric Tailgate