Wireless 2.4 GHz Controller for PS3

Product Application

This product is a PS2 2.4G wireless controller, operating at 2.4GHz. It provides remote wireless control for easy operation and is suitable for various game genres such as racing, fighting, and competition. It aims to deliver an immersive gaming experience for PS2 console users.

Features

The controller features the following:

• The "Menu", "View", and "Share" buttons are easily accessible on the handle for quick navigation.
• This wireless controller is compatible with the Xbox One console and Windows 10 PC systems.
• Equipped with a sensitive joystick and an enhanced D-pad for improved accuracy.
• Includes a rechargeable 300mAh Li-ion battery.
• Offers both wired and wireless connectivity options, allowing connection to the host/computer via cable or using the built-in receiver for wireless play.
• Features a built-in dual motor for vibration feedback.
• Incorporates 256-level precision 3D rockers for precise analog control.
• Provides sensitive button response for easy and intuitive control.
• Offers a gaming range of up to 30 feet (10 meters).

The controller's physical layout includes:

• Top Shoulder Buttons: R1/R2 buttons.
• Face Buttons: Four primary action buttons on the right face, labeled with a triangle, diamond, circle, and asterisk symbols respectively.
• Front Shoulder Buttons: L1/L2 buttons on the left.
• Analog Controls: A D-Pad (Directional Pad) on the left, an ANALOG button, a Left Analog stick (also functions as L3), and a Right Analog stick (also functions as R3) on the right.
• Center Controls: SELECT and START buttons.
• Additional Buttons: "Menu" and "Start" buttons are located below the main face buttons.

Pairing Instructions

To pair the controller with your console or PC:

1. Connect the appropriate receiver into the console's controller port.
2. The LED on the receiver will blink, indicating it is in search mode.
3. Press the "Start" button on the controller; its LED will also blink.
4. Press and hold the "Sync" button on the receiver.
5. Release the "Sync" button once both the receiver and controller's LEDs remain solid, indicating a successful connection.

Resetting the Controller

If you encounter pairing issues, the controller can be reset in two ways:

• Press and hold the "Start" button and the "R" button (likely R1 or R2) simultaneously for 4 seconds.
• Insert a thin metal wire, such as an unbent paperclip, into the small reset hole located on the back of the controller. Gently press and hold the button inside until the LED stops glowing, then restart the pairing process.

Charging

When the controller's battery is low, connect the USB-C charge cable to the controller and the USB end to a powered charger or an available port on a console. The controller is compatible with fast-charging plugs. The LED indicator will remain lit while the controller is charging and will stay lit when fully charged.

FCC Warning

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules, subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

Note 1: This equipment has been tested and found to comply with Class B digital device limits per FCC Rules. These limits aim to provide reasonable protection against harmful interference in residential installations. The equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a specific installation. If interference occurs, users are encouraged to correct it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet on a circuit different from the receiver's.
• Consulting a dealer or an experienced radio/TV technician.

Note 2: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.