User Manual for Guangzhou models including: 2BMEC-08C, 2BMEC08C, 08C Gamepad, 08C, Gamepad
Guangzhou Super Technology Co., LTD 08C gamepad 2BMEC-08C 2BMEC08C 08c
08C / 08C Gamepad User Manual Switch Mode 1. [ Home]Home5 press the [home] key to open the controller gently, and then press the [home] for 5 seconds to enter the pairing state, and the indicator light flashes in a rolling manner. 2. Switch "/" Open the switch host controller setting, enter the "change grip / order" interface, waiting for the controller to connect, and the indicator light will be on after the connection is successful and shake the controller at the same time. 3. Home After successful pairing, press the home key next time to connect automatically Home The function of home key is interface key. Receiver mode HOME 3S switch pro,PC IPTV LED Xinput Press and hold the home key for 3S in the shutdown state to enter the receiver pairing state. The blue light flashes. After connecting, it automatically identifies Android, switch pro, PC, IPTV. After connecting successfully, the blue light is always on and the controller vibrates at the same time; The receiver LED flashes when connected, and is always on after connecting the controller. After entering the receiver XInput mode, the white light flashes. After successful connection, the white light is always on and the controller vibrates. Android (D - input) 1. [A+Home] 5 At the same time, press and hold [a + home] for 5 seconds to enter the Bluetooth pairing state. The indicator light (Blue light) flashes. After the connection is successful, the light is always on. 2. Android Gamepad, Open the Bluetooth of Android device, the handle pattern gamepad appears on the Bluetooth page of mobile phone, click Connect, and the indicator light is always on after the connection is successful. 3. Home After successful pairing, press the home key next time to connect automatically. IOS 1. [Y+HOM],,XBOX Press [y + Hom] at the same time to enter the Bluetooth pairing mode. The light flashes. After the connection is successful, the light is always on. (Xbox agreement) 2. Home IOS Gamepad, After successful pairing, press the home key next time to connect automatically. Turn on the Bluetooth of the IOS device, the handle pattern gamepad appears on the Bluetooth page of the mobile phone, click Connect, and the yellow light is always on after the connection is successful. Windows (x - input] 1. [Home+A]5 Press and hold [Home + a] for 5 seconds to enter the pairing state, and the indicator flashes. 2. Windows Gamepad Open the Bluetooth of windows device, search the device handle, the handle pattern gamepad appears, click Connect, and the indicator is always on after the connection is successful. 3.[Home] After successful pairing, press the [home] key next time to connect automatically. USB USB wired connection Switch PC Automatic identification switch platform, PC platform, Android platform PC X-input "+""-" 5 X-input D-input The X-input mode is automatically recognized by default on the PC platform. You can press the "+" and "-" keys for 5 seconds to switch between X-input and D-input. The white light is on and the handle vibrates; turbo function 1. Turbo+ A/B/X/Y/L1/L2/L3/R1/R2/R3 / Press turbo + A / B / X / Y / L1 / L2 / L3 / R1 / r2 / R3 at the same time to turn on / off the turbo function 2. Turbo 12 /s; turbo 20 /12 /5 / 12 / Turbo continuous firing speed is 12 times / S; Press and hold the turbo key to control the adjustment of the right rocker up and down. The three gears are 20 times / s, 12 times / s and 5 times / s respectively. The default is 12 times / s, and the last setting of the user is recorded. 3. A/B/X/Y/L1/L2/L3/R1/R2/R3 Turbo A/B/X/Y/L1/L2/L3/R1/R2/R3 Turbo A/B/X/Y/L1/L2/L3/R1/R2/R3 Turbo Turbo "+""-""+""-" 040%70%100% 70% Under various modes: Press (for the first time) A/ B / X / Y / L1 / L2 / L3 / R1 / r2 / R3 and turbo keys to set the turbo function. At the same time the handle vibrates! Press the A / B / X / Y / L1 / L2 / L3 / R1 / r2 / R3 and turbo keys again (the second time) to realize the automatic turbo function. At the same time, the handle vibrates; Press the A / B / X / Y / L1 / L2 / L3 / R1 / r2 / R3 and turbo keys again (the third time) to clear the turbo function of any key, Vibration adjustment: Press and hold the turbo key first, and then press the "+" or "-" keys to adjust the vibration . "[+" to increase vibration; - "to reduce vibration] The fourth gear vibration is adjustable (0, 40%, 70%, 100%) and the factory default is 70%. Record the last adjustment by the user. LED Charging indication: Handle off state: the Blue light flashes slowly when charging, and the full led goes out; Handle startup status: when charging, the current channel indicator flashes, and when fully charged, the current indicator is always on; autosleep 1. The Switch screen shuts down and the controller automatically sleeps 2. 5 2. If there are no button operations within 5 minutes, it will automatically sleep 3. HOME 5 4. Press and hold the HOME key for 5 seconds to shut down, disconnect from the host, and the controller will sleep USB USB WIRED CONNECTION MODE '+''-' X-INPUT 1 /D-INPUT 2 /SWITCH PRO 3 ,, ; You can simultaneously press and hold the '+' and '-' keys for 3 seconds to switch between X-Input light 1/D-INPUT light 2/SWITCH PRO light 3. After successful switching, the controller will vibrate once; FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.WPS 文字