User Guide for Kensington models including: K72426AMA Expert Wireless Presenter with Green Laser Pointer and Cursor Control, K72426AMA, Expert Wireless Presenter with Green Laser Pointer and Cursor Control, Green Laser Pointer and Cursor Control, Pointer and Cursor Control, Cursor Control
Kensington Expert Wireless Presenter with Green Laser Pointer and Cursor Control (K72426AMA)
Wireless Presenter with 2.4GHz Dongle PAIRING GUIDE 1. Turn power switch to "OFF" position. 1 2. Press and hold the Black Screen Button, at the same time, turn the power switch to the "ON" position, continue to hold the Black Screen Button for three seconds. 3. The red LED light will flash three times then turn off, the presenter is now in 3 pairing mode. 4. Remove 2.4 GHz dongle from presenter 5. Insert the dongle into an available USB-A port on the host computer. a. It is recommended to position the presenter no further than 8 inches 5 (20cm) from the receiver. 6. After 5 seconds press any button. If button is functional, the pairing was successful. a 2 Power Switch Black Screen Button 4 6 8 inches (<20cm) Kensington® is a trademark of ACCO Brands. All other registered and unregistered trademarks are the property of their respective owners. © 2023 Kensington Computer Products Group, a division of ACCO Brands. k23-4185Adobe PDF Library 17.0 Adobe InDesign 18.5 (Macintosh)