User Manual for GudGear models including: B0C3HG25F1 4 Ways to Format SD Card for Trail Camera, B0C3HG25F1, 4 Ways to Format SD Card for Trail Camera, Format SD Card for Trail Camera, SD Card for Trail Camera, Trail Camera, Camera
4K Trail Camera User Manual (PDF) Dargahou Dargahou Trail,Camera,-,4K,48MP,Game,Camera,with,Night,Vision,,0.05s,Trigger,Motion,Activated,Hunting,Camera,,IP66,Waterproof,130°Wide-Angle,46pcs,No,Glow,Infrared,Leds,for,Outdoor,Wildlife,Monitoring.,B0CMXF4X41,B0C3HG25F1
Trail Camera User Manual IPower Switch and SETUP OFFThe camera power off SETUP The screen will open, you can set the working mode and parameters etc. ON Press OK key, waiting 10s, the screen will close, the camera enters infrared detect mode. Note First push the switch to SETUP, setting MENU, and push the switch to ON! IIThe instruction of operation keysPush the switch to SETUP MENU The screen is open, press the MENU, the left and right keys to translation, the up and down keys to selectthe OK key to confirm. REPLAY Press REPLAY to start replay modethe up and down keys to selectpress the OK key to play/pause, and then press Replay to exit. SHOT Press SHOT to take / record pictures manually, press SHOT to exit. MODE Press MODE to manually switch the photographing / recording mode. Up Down < Left > Right OK Confirm IIIRecording mode setting Video Resolution 4K (no display) Video Length 5s-10Mins Audio Recording OFF/ON NoteThe audio recording function is synchronized with the recording, not recorded separately. If you select OFF, there is no sound in the video; Select ON, the video has sound. IVPhoto mode setting Photo Quality 48MP/42MP/36MP/32MP/24MP/20MP/16MP/8MP/4MP/2MP Photo Burst 1P/2P/3P/4P/5P VMenu setting Mode Work Time Photo or Video Detection Delay PIR sensitive Motion Test Fill Light Distance Date/time Date Format Time Format Loop Recording Beep Sound Memory card format Language Password Protection Factory Reset Version info Motion Detection/Time lapse normal/ Time lapse video Off/On Photo/Video/Photo + Video 5s-1Hour Low/Middle/High Testing PIR trigger function Near/Middle/Far Set date/time D/M/Y or M/D/Y or Y/M/D 24H/12H On/Off On/Off Format SD card and delete all data English/ Russian/Français /Deutsch/Italiano/Spanish/Chinese/Poland/Japan Off/On Reset to default settings Firmware and Bluetooth version number VIQuick operating instructions 1: Install 8pcs AA batteries Pay a attention to the anode and cathode and a 4GB~128GB memory card(Please format it before use); 2: Push the switch to SETUPthe screen is on, setting menu, mode, parameters, etc; 3: Push the switch to ON, press ok key, waiting 10sthe screen is going outthe camera will enter infrared detect mode. If it can detect objects, it will take pictures/videos and save them in the memory card. If it does not detect objects, then the camera will enters standby mode. 4: Push the switch to SETUPthe screen is on press Replayit can replay the photo and video files, Press MENUyou can choose to delete photo / video files. 5: Push the switch to OFF, and camera connect the computer by USB cable, the screen is onyou can browse the photo / video files of the memory card on the computer. Note: 1: If setting password protection, forget the password, please install the batteries to camera, press UP and OK key at the same time, and push the switch to SETUP, will delete the password. 2: The camera will auto power off when no any operation after 3mins. VII Parameters Lens Screen Video Resolution Video Format Video Length Photo Resolution Image Format Photo Burst Trigger Time IR Distance PIR Angle Lens Angle IR LED ISO Memory Card Battery Standby Time Waterproof Net weight Size Certification Working Temperature 2MP 1/3 Sensor CMOS 2.0 inch LCD 4K (no display) MP4 5s-10Mins 48MP/42MP/36MP/32MP//24MP/20MP/16MP/8MP/4MP/2MP JPG 1P/2P/3P/4P/5P 0.3s-0.6s 1-20 m 120 angle 100 angle 46pcs 940nm Automatic 4G~128GB 8pcs AA batteries or DC 6V 6 months IP66 300g 140*98*73MM CE,FCC,ROHS -10~+60/-14~+120WPS 文字