NEBO Inspector™ 500+ LED Pen Light
User Manual and Product Overview
Product Features
The NEBO Inspector™ 500+ is a powerful and versatile LED pen light designed for inspection tasks. It features a bright 500-lumen output and a unique hidden Area Light.
Dimensions: Approximately 76mm in length and 25.4mm in width.
Power Options:
- Rechargeable: Features a built-in rechargeable battery.
- Flex Power: Can also be powered by two AAA batteries (not included).
Operation
The device is operated via a single power button:
- Power On/Off & Mode Cycling: Press the power button to cycle through light modes: High, then Low. Press again to turn the unit off.
- Strobe Mode: Double-tap the power button to activate Strobe mode.
- Direct-To-Low: When the unit is Off, press and hold the power button to directly access Low mode.
- Turbo Mode: When the unit is On, press and hold the power button to activate Turbo mode.
Area Light
To deploy the hidden Area Light, pull the head of the flashlight away from the body.
Charging and Battery Information
Rechargeable Battery Access
To access the charging port:
- Hold the body of the flashlight.
- Rotate the collar clockwise, moving it down and away from the lens.
- Insert the USB cable into the charging port.
Charge Indicator
A "Charge Status" LED indicator is located near the charging port:
- Charging: The LED is red when the battery is charging.
- Fully Charged: The LED turns solid blue when the battery level reaches 100%.
Using AAA Batteries (Flex Power)
To use AAA batteries:
- Unscrew the battery cap.
- Remove the rechargeable batteries.
- Insert two AAA batteries, ensuring the positive (+) side is inserted first.
- Reinstall the battery cap securely.
Warranty Information
This product is guaranteed against all defects in workmanship and materials for the original owner for one year from the date of purchase. For more information, detailed video instructions, and warranty registration, please visit the official NEBO website.
