Simple Key User Guide
Pairing Instructions for Nissan and Infiniti Replacement Keys
Powered by Car Keys Express
Website: www.CarKeysExpress.com/Simple-Key
Packaging Part Number: NSTXA-3050
Important Notes
- All existing keys must be present during the pairing process. Once a new key is paired, all previous keys are erased from memory and will not function until re-paired.
- The new key blade must be cut before programming. This can be done at any local hardware store.
- Ensure the vehicle battery is in good condition and fully charged before pairing. Turn off headlights, radio, and A/C fan to minimize battery draw.
- Do not use the EZ Installer™ while the vehicle is in motion. Unplug it from the OBD port before driving.
- For security, a tamper-evident label is over the EZ Installer connector. If this label is missing, damaged, or shows "VOID", exchange the Simple Key at the retailer.
- Familiarize yourself with the Simple Key's compatibility with your vehicle's make, model, and year before pairing.
Compatibility Lookup
| MAKE/MODEL | YEAR | PRIMARY DIAL POSITION | ALTERNATE DIAL POSITION |
|---|---|---|---|
| NISSAN | |||
| 350Z | 2004-06 | 1 | |
| 2007 | 1 | 3 | |
| 2008-09 | 3 | ||
| Altima | 2005-06 | 1 | |
| Armada | 2004-07 | 1 | |
| 2008 | 3 | ||
| 2009 | 4 | 3 | |
| 2010-15 | 4 | ||
| Cube | 2009-14 | 4 | |
| Frontier | 2004-08 | 1 | |
| 2009 | 1 | 2 | |
| 2010-11 | 2 | 4 | |
| 2012-18 | 4 | ||
| Juke | 2011-14 | 4 | |
| Maxima | 2004-06 | 1 | |
| Murano | 2005-08 | 1 | |
| NV | 2013-17 | 4 | |
| Pathfinder | 2005-07 | 1 | |
| 2008 | 3 | ||
| 2009-12 | 4 | ||
| Quest | 2004-07 | 1 | |
| 2008 | 3 | ||
| 2009 | 4 | ||
| Rogue | 2008 | 3 | |
| 2009 | 4 | 3 | |
| 2010-15 | 4 | ||
| Sentra | 2007-08 | 3 | |
| 2009-18 | 4 | ||
| Titan | 2004-07 | 1 | |
| 2008 | 3 | ||
| 2009 | 3 | 4 | |
| 2010-15 | 4 | ||
| Versa | 2007-08 | 3 | |
| 2009-16 | 4 | ||
| Xterra | 2006-07 | 1 | |
| 2008 | 3 | ||
| 2009-15 | 4 | ||
| INFINITI | |||
| FX | 2003-07 | 1 | |
| 2008 | 3 | 1 | |
| G35 | 2003-06 | 1 | |
| QX56 | 2004-07 | 1 |
Key Pairing Instructions
The EZ Installer provides on-screen instructions. The steps below offer more detail. Read all instructions before starting.
Follow instructions in the blue portion of the screen first, then yellow instructions to proceed.
Example:
Blue Instruction: Insert key and TURN ignition ON.
Yellow Instruction: Press to continue...
Note on Button Presses:
- When you see "Press to continue," press and release the button on the EZ Installer after completing the blue step.
- When you see "Hold to confirm," press and hold the EZ Installer button for 2 seconds and release after completing the blue step.
Nissan Ignition Positions: [Diagram description: A circular graphic showing ignition positions labeled OFF, ACC, ON/RUN, START]
Important Timing Note: Instructions have timing requirements. If you wait too long between steps, the vehicle's computer may time out, requiring you to restart. Move at a quick and even pace.
- Find your vehicle's make, model, and year in the Compatibility Lookup. Turn the EZ Installer dial to the corresponding position.
- Note on Multiple Positions: If multiple dial positions exist for your vehicle, try the PRIMARY position first. If unsuccessful, unplug the EZ Installer, remove the key, open/close the driver's door, set the dial to the ALTERNATE position, and try again.
- Enter the vehicle and close all doors.
- Begin with the vehicle in PARK and the engine OFF.
- Remove the security label from the EZ Installer and firmly insert it into the OBD port (usually located under the dash). Refer to your owner's manual for the exact OBD port location.
- To continue, press and hold the EZ Installer button for 2 seconds, then release.
- Ensure all keys (new and existing) are present. To continue, press and hold the EZ Installer button for 2 seconds, then release.
- Close all doors. Turn on the hazard lights. Press the EZ Installer button to continue.
- VIN Check: Insert a working key into the ignition and start the vehicle. Press the EZ Installer button to continue.
- Turn the vehicle off and remove the key. Press the EZ Installer button to continue.
- Do not press the brake pedal during pairing. Press the EZ Installer button to continue.
- For Dial positions 1 or 2, follow steps A and B. Otherwise, skip to Step 12.
- A. Insert a key into the ignition and turn to the ON position (do not start the engine). Press the EZ Installer button to continue.
- B. Wait up to 30 seconds for the next screen. Proceed to Step 13.
- For Dial positions 3 or 4, follow steps A, B, and C.
- A. Insert a key into the ignition. Press the EZ Installer button to continue.
- B. Wait up to 30 seconds for the next screen.
- C. Turn the key to the ON position (do not start the engine). Press the EZ Installer button to continue.
- Turn the key to the OFF position. Press the EZ Installer button to continue.
- The vehicle is now in pairing mode. Press the EZ Installer button to continue.
- Turn the key to the ON position (do not start the engine). The security light will flash 5 times. Press the EZ Installer button to continue.
- Turn the key to the OFF position and remove the key. Press the EZ Installer button to continue.
- To pair a second key, press and hold the EZ Installer button for 2 seconds and release.
- Insert the next key into the ignition. Press the EZ Installer button to continue.
- Turn the key to the ON position (do not start the engine). The security light will flash 5 times. Press the EZ Installer button to continue.
- Turn the key to the OFF position. Dash lights will turn off. Remove the key. Press the EZ Installer button to continue.
- To pair additional keys, follow on-screen instructions and repeat steps 17-20. Once all keys are paired, press the EZ Installer button once to continue.
- To exit pairing mode, insert one of the paired keys into the ignition again. Press the EZ Installer button to continue.
- Turn the key to the ON position, wait 3-4 seconds, then turn to the OFF position. Press the EZ Installer button to continue.
- Unplug the EZ Installer. If left in the OBD port for over 5 minutes, an alarm will sound as a reminder.
- Turn off hazard lights.
- Test the key: Remove from ignition, reinsert, press the brake, and start the vehicle.
Frequently Asked Questions (FAQs)
Q: Can I use the same EZ Installer on other vehicles?
A: No, the EZ Installer can only pair Simple Keys to one vehicle. You can pair additional Simple Keys to the same vehicle. Visit CarKeysExpress.com or your local retailer for additional keys. If the EZ Installer beeps once for 5 seconds and then continuously, it has already been used on another vehicle.
Q: The EZ Installer sounds a single beep for 5 seconds and shows "VIN Error" on screen, then beeps continuously.
A: This signifies the device has already been used on another vehicle. The EZ Installer can only pair Simple Keys to one vehicle. Return the Simple Key to the retailer where purchased and exchange it for a new unit.
Q: The new key won't pair to my car.
A: If the EZ Installer does not pair the key, the dial position is likely incorrect. The EZ Installer will sound continuously after pressing the pairing button. Check the compatibility section on pages 1-2 to confirm the correct dial position for your make, model, and year. If an alternate dial position is listed, remove the EZ Installer, turn the knob to the alternate position, and try pairing again. If the key still won't pair, contact customer service at 888-598-8910.
Q: The EZ Installer was unplugged during the pairing process.
A: The EZ Installer must remain plugged into the OBD port until pairing is complete. If unplugged, turn the ignition to OFF, remove the key, and restart the pairing process from step 3.
Q: The vehicle won't start with the new key or old keys after attempting to pair.
A: Please call Car Keys Express customer service at 888-598-8910.
Help
For help or assistance, please contact technical support at: 888-598-8910.
Other Keys
Visit CarKeysExpress.com to find a variety of award-winning products, including Universal Car Keys, Universal Car Remotes, and OEM keys and remotes. New Chrysler, Dodge, Jeep, Ram, Nissan, and Infiniti Simple Keys are coming soon.
