KUULAA Magnetic Battery 10000mAh (Digital Display Stand) - User Manual

Product Specifications

Overview

Please read this manual completely and keep it properly.

Warning: Please follow the above safety instructions, otherwise it will cause fire, electric shock, damage, or other damage.

Diagram shows the product with labels: Power Button, Type-C Port, Flip-out Stand, LED Digital Monitor.

How to Use

1. Charge Your Phone or Earbuds with a Cable

Connect your device to the Type-C port on the power bank using a USB cable.

Illustration shows a phone connected to the power bank via a USB-C cable.

2. Charge iPhone Wirelessly

Place your iPhone on the magnetic charging surface of the power bank. The device will begin charging automatically.

Illustration shows an iPhone magnetically attached to the front of the power bank, indicating wireless charging.

3. Charge Device Wirelessly and Recharge the Product Simultaneously

Place your wireless-charging-compatible device on the power bank's charging surface while the power bank itself is connected to a power source via its Type-C port.

Illustration shows a phone charging wirelessly on the power bank, and the power bank being charged via its Type-C port.

4. Recharge the Product

Connect a USB-C cable to the power bank's Type-C port and plug the other end into a compatible power adapter or USB port.

Illustration shows the power bank being charged via its Type-C port.

Notes on Wireless Charging:

• This power bank is not compatible with non-Magsafe phone cases, such as Otterbox Defender cases.
• Do not use an adapter with an output of 5V/1A (5W) or less.
• Compared with wired chargers, wireless chargers are more convenient in many situations, but due to current wireless technology limitations, the charging speed is slower.
• High temperatures will reduce charging speed and restrict power output, a common behavior for all wireless chargers. It is recommended to charge your device in environments with temperatures between 0°C to 40°C.
• The materials of phone cases and the alignment of your device on the wireless charger will affect charging speed and stability. Try to align the charging device with the coil position of the charger during charging.

Important Safety Instructions

When using this product, basic precautions should always be taken, including the following:

1. Keep the product at normal temperatures and in shade places.
2. Do not store the product in a hot or humid environment.
3. Use of a power supply or charger not recommended or sold by the product manufacturer may result in injuries to people.
4. Operating temperature should be between 0°C to 40°C.
5. Do not disassemble the product. Take it to a professional serviceman when repair is required. Incorrect disassembly or reassembly may result in a risk of accidents to people and damage to the product.
6. If the product is not used for a long time, you should charge and discharge it every three months.
7. When charging a device, the product may heat up within a certain temperature range. This is a normal operating condition.
8. In normal conditions, battery performance will slowly decline over the course of a few years.
9. Do not dispose of the product in heat or fire.
10. Do not clean the product with harmful chemicals or detergents.
11. Misuse, dropping, or excessive force may cause damage to the product.
12. Dispose of the disused battery properly, keeping cells or batteries of different electrochemical systems separate from each other.
13. Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them.

Warranty Information

Users can enjoy free warranty service within 12 months of the date of purchase.

The limited warranty does not apply in the following cases:

• Any damages caused by human factors, misuse of the product, unauthorized alteration or change of parts or components of the product, etc.
• Any damages caused by bad transportation or other irresistible factors such as floods, fire, lightning, earthquakes, etc.

The company reserves the right, at its discretion, to change, modify, add, or remove portions of these terms at any time.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

About KUULAA

KUULAA is a trademark registered in the USA, EU, and UK. All rights reserved.

Contact: Support@kuulaa.cn