Beko Washing Machine BM3WFST411415W
Supplier: Beko
Address: Beko Romania S.A. Gaesti, Dambovita District, 13 Decembrie Street, No. 210, Romania
Model Identifier: BM3WFST411415W 457100000026
General Product Parameters
| Parameter | Value | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Rated capacity (kg) | 11.0 | ||||||||
| Dimensions in cm |
|
||||||||
| Energy efficiency index (EEIw) | 51.5 | ||||||||
| Energy efficiency class | A | ||||||||
| Washing efficiency index | 1,031 | ||||||||
| Rinsing effectiveness (g/kg) | 4.9 | ||||||||
| Energy consumption in kWh per cycle, based on the eco 40-60 programme at a combination of full and partial loads. Actual energy consumption will depend on how the appliance is used. | 0.525 | ||||||||
| Water consumption in litre per cycle, based on the eco 40-60 programme at a combination of full and partial loads. Actual water consumption will depend on how the appliance is used and on the hardness of the water. | 54 | ||||||||
| Maximum temperature inside the treated textile (°C) |
|
||||||||
| Weighted remaining moisture content (%) | 53.9 | ||||||||
| Spin speed (rpm) |
|
||||||||
| Spin-drying efficiency class | B | ||||||||
| Programme duration (h:min) |
|
||||||||
| Type | Free-Standing | ||||||||
| Airborne acoustical noise emissions in the spinning phase (dB(A) re 1 pW) | 77 | ||||||||
| Airborne acoustical noise emission class (spinning phase) | C | ||||||||
| Off-mode (W) (if applicable) | 0.50 | ||||||||
| Standby mode (W) (if applicable) | 0.50 | ||||||||
| Delay start (W) (if applicable) | 4.00 | ||||||||
| Networked standby (W) (if applicable) | NA |
Additional Information
Minimum duration of the guarantee offered by the supplier: 24 months
Silver Ion Release: This product has been designed to release silver ions during the washing cycle: NO
For more details, visit the supplier's website: http://support.beko.com (Information found in point 9 of Annex II to Commission Regulation (EU) 2019/2023)
