Owner's Manual for MEAN WELL models including: HLG-80H-12, HLG-80H-15, HLG-80H-20, HLG-80H-24, HLG-80H-30, HLG-80H-36, HLG-80H-42, HLG-80H-48, HLG-80H-54, HLG-80H Series 80W Constant Voltage Plus Constant Current LED Driver, HLG-80H Series, 80W Constant Voltage Plus Constant Current LED Driver, Voltage Plus Constant Current LED Driver, Constant Current LED Driver, Current LED Driver, LED Driver, Driver
Jan 9, 2025 — For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF ...
9 janv. 2025 — For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF ...
LED Neon Flex Control & Accessories - Olympia Lighting
File Info : application/pdf, 10 Pages, 771.46KB
DocumentDocument80W Constant Voltage + Constant Current LED Driver
HLG-80H series
User's Manual
(except for AB,BL-type) (except for B/AB/D-type)
IS 15885(Part 2/Sec13)
THOMAS SAMUEL
THOMAS SAMUEL
R-41027766
(for 36A,54A only)
Bauar t gepruft Sicherheit
egelma ge od o s be wac g www. tuv.com ID 2000000000
IP65 IP67
I
·
current
output. HLG-80H operates from 90305VAC and offers models with different rated voltage rangingbetween
12V and 54V. Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to operate for -40 ~ +80 case temperature under free air convection. The design of metal housing and
IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-80H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
B
BL D
File Name:HLG-80H-SPEC 2024-07-19
80W Constant Voltage + Constant Current LED Driver
HLG-80H series
SPECIFICATION
MODEL
HLG-80H-12 HLG-80H-15 HLG-80H-20 HLG-80H-24 HLG-80H-30 HLG-80H-36 HLG-80H-42 HLG-80H-48 HLG-80H-54
OUTPUT
DC VOLTAGE
12V
15V
20V
24V
30V
CONSTANT CURRENT REGION Note.4 7.2 ~12V 9 ~ 15V
12 ~ 20V 14.4 ~ 24V 18 ~ 30V
RATED CURRENT
5A
5A
4A
3.4A
2.7A
RATED POWER
60W
75W
80W
81.6W
81W
RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p
VOLTAGE ADJ. RANGE
Adjustable for A-Type only (via built-in potentiometer) 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 22 ~ 27V 27 ~ 33V
CURRENT ADJ. RANGE
Adjustable for A/AB-Type only (via built-in potentiometer)
3 ~ 5A
3 ~ 5A
2.4 ~ 4A 2.04 ~ 3.4A 1.62 ~ 2.7A
VOLTAGE TOLERANCE Note.3 ±2.5%
±2.0%
±1.0%
±1.0%
±1.0%
LINE REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION
±2.0%
±1.5%
±1.0%
±0.5%
±0.5%
SETUP, RISE TIME Note.6 1200ms,200ms/115VAC 500ms,200ms/230VAC
36V 21.6 ~ 36V 2.3A 82.8W 200mVp-p
33 ~ 40V
1.38 ~ 2.3A ±1.0% ±0.5% ±0.5%
42V 25.2 ~ 42V 1.95A 81.9W 200mVp-p
48V 28.8 ~ 48V 1.7A 81.6W 200mVp-p
38 ~ 46V 43 ~ 53V
1.17 ~ 1.95A 1.02 ~ 1.7A
±1.0%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
54V 32.4 ~ 54V 1.5A 81W 200mVp-p
49 ~ 58V
0.9 ~ 1.5A ±1.0% ±0.5% ±0.5%
HOLD UP TIME (Typ.)
16ms at full load 230VAC /115VAC
VOLTAGE RANGE
90 ~ 305VAC 127 ~ 431VDC Note.5 (Please refer to "STATIC CHARACTERISTIC" section)
INPUT
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF0.96/115VAC, PF0.96/230VAC, PF0.94/277VAC @ full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION THD< 20% (@ load60% / 115VAC,230VAC; @ load75% / 277VAC) (Please refer to "TOTAL HARMONIC DISTORTION (THD)" section)
EFFICIENCY (Typ.)
88%
89%
90%
90.5%
91%
91%
91%
91%
91%
AC CURRENT (Typ.)
0.85A / 115VAC 0.425A / 230VAC 0.4A / 277VAC
INRUSH CURRENT (Typ.)
COLD START 70A(twidth=485s measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER
3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC
OVER CURRENT
SHORT CIRCUIT PROTECTION
OVER VOLTAGE
95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed 14 ~ 17V 18 ~ 24V 23 ~ 30V 28 ~ 35V 35 ~ 43V 41 ~ 49V Shut down o/p voltage, re-power on to recover
48 ~ 58V
54 ~ 63V
59 ~ 68V
OVER TEMPERATURE
WORKING TEMP.
MAX. CASE TEMP.
ENVIRONMENT
WORKING HUMIDITY STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
Shut down o/p voltage, re-power on to recover Tcase= -40 ~ +80 (Please refer to "OUTPUT LOAD vs TEMPERATURE" section) Tcase= +80 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH ±0.03%/ (0 ~ 60)
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750(type"HL"), CSA C22.2 No. 250.0-08, UL8750 LISTED for HLG-80H- BL;BS EN/EN/AS/NZS 61347-1,BS EN/EN/AS/NZS 61347-2-13
SAFETY STANDARDS Note.8 J61347-1, J61347-2-13(except for B,AB and D-type), GB19510.1,independent, GB19510.14,EAC TP TC 004,BIS IS15885(for 36A, 54A only), IP65 or IP67,KC61347-1,KC61347-2-13(except for AB,BL-type) approved
SAFETY & EMC
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load60%); BS EN/EN61000-3-3,GB/T 17743 , GB17625.1, Note.8 EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020
OTHERS NOTE
MTBF
2992.9K hrs min. Telcordia SR-332 (Bellcore) ; 289.1K hrs min. MIL-HDBK-217F (25)
DIMENSION
195.6*61.5*38.8mm (L*W*H)
PACKING
0.84Kg; 16pcs/14.4Kg/0.54CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to "DRIVING METHODS OF LED MODULE".
5. De-rating may be needed under low input voltages. Please refer to "STATIC CHARACTERISTIC" sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently
connected to the mains.
9. This series meets the typical life expectancy of >62,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75 or less.
10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com.
11. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft).
12. For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:HLG-80H-SPEC 2024-07-19
80W Constant Voltage + Constant Current LED Driver
HLG-80H series
BLOCK DIAGRAM
EMI FILTER
I/P
&
RECTIFIERS
FG
PFC CIRCUIT
POWER SWITCHING
O.T.P.
O.L.P.
PWM & PFC CONTROL
RECTIFIERS &
FILTER
Fosc : 100KHz
O.L.P.
DETECTION CIRCUIT
O.V.P.
+V
-V
DIM+ DIM(B Type)
DRIVING METHODS OF LED MODULE
This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.
Vo(%)
100
60 (min.)
(A) Constant Voltage area
(B) Constant
Current area
In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL.
(C) Hiccup Protection
50
100
Io (%)
Typical output current normalized by rated current (%)
File Name:HLG-80H-SPEC 2024-07-19
80W Constant Voltage + Constant Current LED Driver
DIMMING OPERATION
HLG-80H series
AC/L(Brown) AC/N(Blue) FG (Green/Yellow)
HLG-80H
+V(Red) -V(Black)
DIM+(Purple) DIM-(Pink)
3 in 1 dimming function (for B/AB-Type)
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100A (typ.)
Applying additive 1 ~ 10VDC
100%
+V +
90%
+
80%
Output current (%)
-V
70%
-
60%
DIM+
50%
+
Additive Voltage
40%
-
30%
DIM-
20%
"DO NOT connect "DIM- to -V"
10% 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage
Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
+V +
+
-V
-
DIM+
Additive PWM signal DIM-
"DO NOT connect "DIM- to -V"
Output current (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input
Applying additive resistance:
+V +
+
-V
-
DIM+
Additive Resistance DIM-
"DO NOT connect "DIM- to -V"
Output current (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation) Dimming input: Additive resistance
File Name:HLG-80H-SPEC 2024-07-19
80W Constant Voltage + Constant Current LED Driver
HLG-80H series
Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options.
N FG L
Relay
Switch
Adjuster
10K/N~100K/N Ohms resistance 1~10V DC Voltage 10V PWM Signal
Green/ Yellow
Brown
Blue
AC/L AC/N
HLG-80H B-Type
DIM+ DIM-
V(-) V(+)
Purple Pink Black Red
LED Lighting Fixture
Using a switch and relay can turn ON/OFF the lighting fixture.
File Name:HLG-80H-SPEC 2024-07-19
80W Constant Voltage + Constant Current LED Driver
OUTPUT LOAD vs TEMPERATURE(Note.10)
HLG-80H series
PF
LOAD (%)
LOAD (%)
100
100
80
80
230VAC
Input only
60
60
40
40
20
20
-40
-25 -10 0
15
30
50
60
70 (HORIZONTAL)
-40 -25 0
20
45
55
65
75
80 (HORIZONTAL)
AMBIENT TEMPERATURE,Ta ()
Tcase ()
LOAD (%)
STATIC CHARACTERISTICS
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
INPUT VOLTAGE (V) 60Hz De-rating is needed under low input voltage.
POWER FACTOR(PF) CHARACTERISTIC
Tcase at 70
Constant Current Mode
1 .0 0
0 .9 8
0 .9 6
0 .9 4
0 .9 2
0 .9 0
0 .8 8
0 .8 6
0 .8 4
0 .8 2
0 .8 0
0 .7 8
50%
60%
70%
80%
90%
LOAD
100%
(80W)
277Vac 230Vac 115Vac
TOTAL HARMONIC DISTORTION (THD)
48V Model, Tcase at 70
18
16
14
12
10
8
6
4
2
0
50%
60%
70%
80%
LOAD
277VAC 230VAC 115VAC
90% 100%
EFFICIENCY (%)
EFFICIENCY vs LOAD
HLG-80H series possess superior working efficiency that up to 91% can be reached in field applications. 48V Model, Tcase at 70
92
88
84
80
277Vac
76
230Vac
72
115Vac
68
64 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
File Name:HLG-80H-SPEC 2024-07-19
THD(%)
80W Constant Voltage + Constant Current LED Driver
HLG-80H series
LIFE TIME
LIFETIME(Kh)
120 100 80 60 40 20
0 25 30 35 40 45 50 55 60 65 70 75 80
Tc a s e ()
File Name:HLG-80H-SPEC 2024-07-19
80W Constant Voltage + Constant Current LED Driver
HLG-80H series
MECHANICAL SPECIFICATION
Blank/D-Type
Case No.997A Unit:mm Tolerance:±1
12 9.6
300±20 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) SJOW 17AWG&H05RN-F 1.0mm 2 *3C
195.6 171.8
T case
tc
85.9
32 46.5 61.5 30.75
tc : Max. Case Temperature
300±20
SJOW 17AWG&05RN-F 1.0mm 2 *2C 4.2×4PL
+V(Red) -V(Black)
38.8
A-Type
12 9.6
300±20 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) SJOW 17AWG&H05RN-F 1.0mm 2 *3C
195.6 171.8
T case tc
32 46.5 61.5 30.75
tc : Max. Case Temperature
300±20
85.9
+V(Red)
-V(Black)
Io
Vo
SJOW 17AWG&05RN-F 1.0mm 2 *2C
ADJ.
ADJ.
4.2×4PL
38.8
File Name:HLG-80H-SPEC 2024-07-19
80W Constant Voltage + Constant Current LED Driver
B-Type
HLG-80H series
12 9.6
300±20 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) SJOW 17AWG&H05RN-F 1.0mm 2 *3C
195.6 171.8
T case
tc
85.9
32 46.5 61.5 30.75
tc : Max. Case Temperature
300±20
SJOW 17AWG&05RN-F 1.0mm 2 *2C
UL2517 20AWG*2C 4.2×4PL
+V(Red) -V(Black)
DIM+(Purple) DIM-(Pink)
38.8
AB-Type
12 9.6
300±20 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) SJOW 17AWG&H05RN-F 1.0mm 2 *3C
32 46.5 61.5 30.75
195.6 171.8
T case
tc
85.9
Io ADJ.
tc : Max. Case Temperature
300±20
SJOW 17AWG&05RN-F 1.0mm 2 *2C
UL2517 20AWG*2C 4.2×4PL
+V(Red) -V(Black)
DIM+(Purple) DIM-(Pink)
38.8
File Name:HLG-80H-SPEC 2024-07-19
80W Constant Voltage + Constant Current LED Driver
HLG-80H series
WATERPROOF CONNECTION
Waterproof connector Waterproof connector can be assembled on the output cable of HLG-80H to operate in dry/wet/damp or outdoor environment.
AC
source
I/P
HLG-80H
O/P
Size
Pin Configuration (Female)
Size
Pin Configuration (Female)
M12
Order No. Suitable Current
4-PIN 5A/PIN M12-04 10A max.
Cable Joiner
66 26 20
5-PIN 5A/PIN M12-05 10A max.
M15
Order No. Suitable Current
2-PIN 12A/PIN M15-02 12A max.
CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG
LED Lamp
25
Up to four wires can be connected through this cable joiner by soldering or clamping by tools.
HLG-80H
O/P Wires
CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2.
Junction Box Option
171.8 334
AC/L(Brown) AC/N(Blue) FG (Green/Yellow)
SJOW 17AWG& H05RN-F 1.0mm 2 *3C
3- PF 1/2" 150±20
LED Lamp
76
10
5
3- PF 1/2" 150±20
+V(Red) -V(Black) SJOW 17AWG& 05RN-F 1.0mm 2*2C
2-5
61.5 61 8.5 32 8.5 6 35 38.8
Junction box option is available for A / B / Blank - Type. Please contact MEAW WELL for details.
86
HLG-80H- BL models with junction box on both input and output sides are UL LISTED approved(modified by B type only).
INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html
File Name:HLG-80H-SPEC 2024-07-19
MEAN WELL Switching Power Supply Manufacturer