USER MANUAL

Introduction

Thank you for purchasing this Heart Rate Sensor. This device supports both Bluetooth 4.0, real-time monitoring heart rate, and data is transmitted wirelessly to your phone or sports watch. With MooFit App, records your every movement heart rate.

⚠️ IMPORTANT: This product is for sport purposes only and it is not meant to replace any medical advice.

Device Overview

The device consists of the following components:

• Chest Strap: The main strap that holds the sensor against the body.
• Heart Rate Connector: Attaches to the chest strap and houses the CR2032 battery.
• User Manual: This document.

[Diagram Description: Illustrations show the separate chest strap and heart rate connector. The connector is shown with a CR2032 battery installed.]

How to Use

Wear the Heart Rate Sensor

1. Moisten the electrode areas of the chest strap.
2. Attach the connector to the chest strap, ensuring the side marked 'L' is positioned towards your left side. [Illustration shows connector with 'L' and 'R' markings being attached to the strap.]
3. Adjust the strap length for a snug yet comfortable fit. Confirm that the moistened electrode areas are making firm contact with your skin. [Illustration shows a person wearing the strap correctly.]

Compatible with most popular Apps

• MooFit
• Endomondo
• Strava
• Sports Tracker
• Runtastic
• Wahoo Fitness

Caring for your device

This device is a high-tech instrument that should be handled with care. Follow the caring instructions to ensure reliable measurement and to maximize the life span of the heart rate sensor.

Heart rate connector

Detach the connector from the strap after every use and dry the connector with a soft towel. Do not use cleaning chemicals.

Chest strap

Rinse the strap under running water after every use and hang to dry. Cleaning of the strap in a washing machine or using drying machines is strongly prohibited.

• Never use cleaning chemicals, as this can cause the chest strap to age faster and shorten its service life.
• Do not stretch the strap or bend the electrode areas sharply.
• Do not store the heart rate sensor wet in non-breathing material, to prevent snap oxidation. Dry and store the strap and the connector separately.

Batteries

This device uses a CR2032 battery, which has been installed in the heart rate connector. The battery life is approximately 800 hours.

Battery replacement

1. Using a coin, twist the battery door counter-clockwise until it audibly clicks and releases. [Illustration shows a coin being used to turn the battery cover.]
2. Remove the old battery. Dispose of the battery correctly according to local regulations.
3. Replace the battery with the positive (+) side facing upwards. Use a coin to twist the battery door clockwise until it clicks securely into place. [Illustration shows a new battery being inserted and the cover replaced.]

⚠️ Safety Warning: To avoid danger, batteries should be kept away from children's reach.

Heart Rate Sensor Specifications

Note: All technology is subject to actual performance.

Suitable Model

• iOS 7.0 system version above, iPhone 4s or later.
• Any Bluetooth 4.0 enabled Android device with Android 4.3 or later.

Disclaimer

• The product described is subject to change without prior notice, due to the manufacturer's continuous development program.
• Our company makes no representations or warranties with respect to this manual or with respect to the products described herein.
• Our company shall not be liable for any damages, losses, costs or expenses, direct, indirect or incidental, consequential or special, arising out of, or related to the use of this material or the products described herein.