Home | DrayTek
DrayTek File Server
MyVigor - DrayTekHome | DrayTek
User Guide for DrayTek models including: Q60x Vigor Switch, Q60x, Vigor Switch, Switch
22 Jan 2025 — Read the installation guide thoroughly before you set up the switch. ○ The switch is a complicated electronic unit that may be repaired only be.
Jan 22, 2025 — Read the installation guide thoroughly before you set up the switch. ○ The switch is a complicated electronic unit that may be repaired only be.
File Info : application/pdf, 8 Pages, 1.08MB
DocumentDocumentVigorSwitch Q60x Unmanaged Switch Quick Start Guide Version: 1.0 (For future update, please visit DrayTek web site) Date: January 22, 2025 i Intellectual Property Rights (IPR) Information Copyrights Trademarks © All rights reserved. This publication contains information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The following trademarks are used in this document: Microsoft is a registered trademark of Microsoft Corp. Windows 8, 10, 11 and Explorer are trademarks of Microsoft Corp. Apple and Mac OS are registered trademarks of Apple Inc. Other products may be trademarks or registered trademarks of their respective manufacturers. Safety Instructions and Approval Safety Instructions Read the installation guide thoroughly before you set up the switch. The switch is a complicated electronic unit that may be repaired only be authorized and qualified personnel. Do not try to open or repair the switch yourself. Do not place the switch in a damp or humid place, e.g. a bathroom. The switch should be used in a sheltered area, within a temperature range of +0 to +40 Celsius. Do not expose the switch to direct sunlight or other heat sources. The housing and electronic components may be damaged by direct sunlight or heat sources. Do not deploy the cable for LAN connection outdoor to prevent electronic shock hazards. Keep the package out of reach of children. When you want to dispose of the switch, please follow local regulations on conservation of the environment. Warranty We warrant to the original end user (purchaser) that the switch will be free from any defects in workmanship or materials for a period of two (2) years from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, we will, at our discretion, repair or replace the defective products or components, without charge for either parts or labor, to whatever extent we deem necessary tore-store the product to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal value, and will be offered solely at our discretion. This warranty will not apply if the product is modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. The warranty does not cover the bundled or licensed software of other vendors. Defects which do not significantly affect the usability of the product will not be covered by the warranty. We reserve the right to revise the manual and online documentation and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. ii EU Declaration of Conformity Hereby, DrayTek Corporation declares that the equipment type VigorSwitch is in compliance with EU EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://fw.draytek.com.tw/VigorSwitch%20Q60x/Document/CE/ Product name: Model number: Manufacturer: Address: Unmanaged Switch VigorSwitch Q60x DrayTek Corp. No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan Declaration of Conformity Hereby, DrayTek Corporation declares that the equipment type VigorSwitch is in compliance with The Electromagnetic Compatibility Regulations 2016 (SI 2016 No.1091), The Electrical Equipment (Safety) Regulations 2016 (SI 2016 No.1101), and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No. 3032). The full text of the UKCA Declaration of Conformity is available at the following internet address: https://fw.draytek.com.tw/VigorSwitch%20Q60x/Document/CE/ Product name: Model number: Manufacturer: Address: Unmanaged Switch VigorSwitch Q60x DrayTek Corp. No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device may accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. iii More update, please visit www.draytek.com. USA Local Representative Company name Address ZIP Code Contact Person ABP International Inc. 13988 Diplomat Drive Suite 180 Dallas TX 75234 75234 E-mail henry@abptech.com Mr. Henry N Castillo Tel. (972)831-1600 140 Be a Registered Owner Web registration is preferred. You can register your Vigor switch via https://myvigor.draytek.com. Firmware & Tools Updates Due to the continuous evolution of DrayTek technology, all switches will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents. https://www.draytek.com iv 1. Package Content VigorSwitch Quick Start Guide The type of the power cord depends on the country that the switch will be installed. UK-type power adapter EU-type power adapter USA/Taiwan-type power adapter AU/NZ-type Power Adapter If any of these items is found missing or damaged, please contact your local supplier for replacement. 1 2. Panel Explanation LED Port 1 ~ 5 (GbE RJ45) Port 6 (SFP+) DC 12V Status On (Green) On (Amber) Blinking Off On (Blue) Off On Off Explanation The device is connected with 2.5Gbps. The device is connected with 100M/1000Mbps. The system is sending or receiving data through the port. The port is disconnected or the link is failed. The device is connected with 10Gbps. The port is disconnected or the link is failed. The device is powered on and running normally. The device is not ready or is failed. 2 3. Hardware Installation 3.1 Network Connection Allowance for connecting Non-PoE devices Use the Ethernet cable(s) to connect None-PoE devices to the Vigor switch. All device ports are in the same local area network. 3.2 Wall-Mounted Installation Wall-mounted installation might be required in some cases. Refer to the following figure: 74mm 4mm Two screw slots are visible on the bottom side of the switch, which are used for wall-mounting the switch. The distance between the two slots is 74mm. Please search for two suitable screws and fix it to the wall through screw anchors. Note that the wall-mounted slot of the switch must be aligned with the two screws. 3 4. Customer Service If the switch cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@draytek.com. GPL Notice This DrayTek product uses software partially or completely licensed under the terms of the GNU GENERAL PUBLIC LICENSE. The author of the software does not provide any warranty. A Limited Warranty is offered on DrayTek products. This Limited Warranty does not cover any software applications or programs. To download source codes please visit: https://gplsource.draytek.com GNU GENERAL PUBLIC LICENSE: https://gnu.org/licenses/gpl-2.0 Version 2, June 1991 For any question, please feel free to contact DrayTek technical support at support@draytek.com for further information. 4