192.168.l.l - 192.168.1.1 Admin Login
support.proxim.com
OpenSSL
User Guide for Proxim models including: StratumTM X5 US Point To Point Radio, StratumTM X5, US Point To Point Radio, To Point Radio, Radio
Proxim Wireless Corporation GIGA5 HZB-GIGA5 HZBGIGA5 giga5
File Info : application/pdf, 31 Pages, 2.46MB
DocumentDocumentSt rat um TM X5 Safety and Regulatory Guide Products Covered StratumTM X5 -SX5-1040A -SX5-1042A -SX5-1040A Quickbridge -SX5-1042A Quickbridge Copyright © 2024 Proxim W ireless Corporation, San Jose, CA. All rights reserved. Covered by one or more of the follow ing U.S. patents: 5,231,634; 5,875,179; 6,006,090; 5,809,060; 6,075,812; 5,077,753. The content described herein are copyrighted w ith all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means w ithout the w ritten permission of Proxim W ireless Corporation. Tradem arks StratumTM , Proxim® and the Proxim logo are the trademarks of Proxim W ireless Corporation. All other trademarks mentioned herein are the property of their respective ow ners. Disclaim er Proxim reserves the right to revise this publication and to make changes in content from time-to-time w ithout obligation on the part of Proxim to provide notification of such revision or change. Proxim may make improvements or changes in the product(s) described in this guide at any time. When using these devices, basic safety precautions should alw ays be follow ed to reduce the risk of fire, electric shock and injury to persons. GPL License Not e StratumTM products include, in part, some free softw are that is developed by Free Softw are Foundation. A user is granted license to this softw are under the terms of either the GNU General Public License or GNU Lesser General Public License (See http://www.gnu.org/licenses/licenses.html). This license allow s the user to freely copy, modify and redistribute this softw are and no other statement or documentation from us. To get a copy of this softw are, or for any other information, please contact our customer support team). OpenSSL License Not e StratumTM products contains softw are developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and that is subject to the follow ing copyright and conditions: Copyright (c) 1998-2016 The OpenSSL Project. All rights reserved. The names " OpenSSL Toolkit" and " OpenSSL Project" must not be used to refer to, endorse, or promote the products or for any other purpose related to the products w ithout prior w ritten permission. For w ritten permission, please contact openssl-core@openssl.org. This softw are is provided by the OpenSSL Project " as is" and any expressed or implied w arranties, including, but not limited to, the implied w arranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the OpenSSL Project or its contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) how ever caused and on any theory of liability, w hether in contract, strict liability, or tort (including negligence or otherw ise) arising in any w ay out of the use of this softw are, even if advised of the possibility of such damage. StratumTM X5 - Safety and Regulatory Guide Documentation Version:1.1 P/N 765-00424, January 2024. St rat umTM X5 - Saf et y and Regulat ory Guide 2 Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1 StratumTM Series - Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Information (USA, Canada and European Union and UK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Federal Communications Commission (FCC) Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 FCC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Installation within TDWR Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Industry Canada Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 IC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 European (ETSI) and UK Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Countries of Operation and Conditions of Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5GHz Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Transmit Power Control (TPC) for 5 GHz operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Certification Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 USA (See USA - Certification) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Canada (See CANADA - Certification). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 ETSI (See ETSI - Certification) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 UK (See UK - Certification) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 CB (See CB - Test Certificate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 2 Information for Professional Installer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Information for Professional Installers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Adjusting Tx Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Antenna Gain Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 A USA - Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 B CANADA - Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 C ETSI - Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 D UK - Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 E CB - Test Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 St rat um TM X5 - Saf et y and Regulat ory Guide 3 Pre f a ce About t his Guide This document contains the safety and regulatory compliance information for the follow ing StratumTM products: · StratumTM X5 Series SX5-1040A SX5-1042A Relat ed Docum ent s In addition to this guide, please refer to the follow ing documents for StratumTM X5 products that are available at Proxim's support site http://support.proxim.com. · Quick Installation Guide (QIG): A quick reference guide that provides essential information for installing and configuring the device. · Device M anagement Guide - A guide that gives an overview of the device user interface and explains the step-by-step procedure to configure, manage and monitor the device by using Graphical User Interface. · Softw are Configuration Guide: A guide that provides softw are configuration information for Proxim devices. · Hardw are Installation Guide: A guide that provides a hardw are overview and details about the installation procedures and hardw are specifications. · CLI Guide - A guide that gives instructions on how to configure, manage and monitor the device using Command Line Interface. Proxim recommends you to visit its support site http://support.proxim.com for regulatory information and latest product u p d at es. St rat um TM X5 - Saf et y and Regulat ory Guide 4 St r a t u m TM Se r i e s - Re g u l a t o r y I n f o r m a t i o n 1 This chapter contains information on the follow ing: · Safety Information (USA, Canada and European Union and UK) · Federal Communications Commission (FCC) Compliance · Industry Canada Compliance · Certification Summary 1.1 Saf et y Inf orm at ion (USA, Canada and European Union and UK) Listed below are the product(s) and their corresponding safety standards that they comply w ith: Product (s) SX5-1040A SX5-1042A Standards IEC 62368-1:2018 UL 62368-1:2019 CSA C22.2 No. 62368-1:19 EN IEC 62368-1:2020+A11:2020 BS EN IEC 62368-1:2020+A11:2020 All products are intended to be installed, used, and maintained by experienced telecommunications personnel only. When using these products, basic safety precautions should alw ays be follow ed to reduce the risk of fire, electrical shock, and injury to persons, including the follow ing: · Devices must be installed and used in strict accordance w ith the manufacturer' s instructions as described in the user d o cu m en t at io n . · Installation of these products in the end use must conform to local regulations and codes. · Devices are to be used w ith and pow ered only by the Pow er Injector provided. · A 16-amp circuit breaker is required at the pow er source. · The devices are intended to be grounded. Use a 12 AWG earthing conductor at a minimum. · Do not connect or disconnect the pow er cable from the device w hen the pow er injector is plugged into an AC pow er o u t let . · Devices should be serviced by trained personnels only. Do not disassemble the device. By opening or removing any covers, you may expose yourself to hazardous energy parts. Incorrect reassembly of these devices can cause malfunction and/or electric shock w hen later used. There are no user serviceable parts; all repairs and services must be handled by a qualified service center. · Do not insert any objects of any shape or size inside these devices w hile pow ered on. Object may contact hazardous energy parts that could result in a risk of fire or personal injury. · Do not remove or alter the marking label provided on these devices. · To avoid the risk of electric shock from lightning, do not use these devices during an electrical storm. · RJ-45 maximum available current is 1.33A. WARNING: These devices are intended for installation in accordance with Articles 110-18, 110-26, and 110-27, 725, 800, and 810 of the United States National Electric Code ANSINFPA 70, and per the applicable Articles in the Canadian National Electric Code. St rat umTM X5 - Saf et y and Regulat ory Guide 5 Regulat ory Inf ormat ion 1.2 Federal Com m unicat ions Com m ission (FCC) Com pliance The StratumTM devices have been tested and found to comply w ith the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference w hen the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance w ith the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in w hich case the user w ill be required to correct the interference at his ow n expense. WARNING: · To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as co-located antennas transmitting the same information) is expressly forbidden. The device operation is subject to the follow ing tw o conditions: 1. The device may not cause harmful interference 2. The device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operate in conjunction w ith any other antenna or transmitter. The FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. 1.2.1 M odif icat ions The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by the manufacturer may void the user's authority to operate the device. The correction of interference caused by unauthorized modification, substitution or attachment w ill be the responsibility of the user. The manufacturer and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from failing to comply w ith these guidelines. WARNING: · Modification of this device to receive cellular Radio Telephone service signals is prohibited under FCC Rules and Federal Law. · Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules. St rat umTM X5 - Saf et y and Regulat ory Guide 6 Regulat ory Inf ormat ion 1.2.2 FCC Radiat ion Exposure St at em ent The StratumTM devices comply w ith FCC radiation exposure limits set forth for an uncontrolled environment. Tabulated below are the products and the FCC radiation exposure limits follow ed by the devices: Product(s) SX5-1040A SX5-1042A St andards · Product models using external antennas require professional installation. The antennas used for professional installation must be fixed-mounted on outdoor permanent structures w ith a minimum separation distance from the antenna to the users for antennas according to the below table: · Antennas must not be co-located and must not operate in conjunction w ith any other antenna or transmitter. Antenna M odel TM 55D-HVOM NI-12 TM 55D-HVSCTR-21 M T-466010/NVH TM 55L-DPDISH M A-WA57-QP4M IM O19 PCB Antenna Frequency (M Hz) 5150 to5250 5250 to 5350 5470 to 5725 5725 to 5850 5150 to 5250 5250 to 5350 5470 to 5725 5725 to 5850 5150 to 5250 5250 to 5350 5470 to 5725 5725 to 5850 5150 to 5250 5725 to 5850 5150 to 5250 5250 to 5350 5470 to 5725 5725 to 5850 2402 to 2480 M inimum Separation Distance (CM ) 33 20 20 37 47 20 20 59 83 45 45 131 66 292 52 20 20 59 20 1.2.3 Inst allat ion w it hin TDWR Range Before mounting and installing the device, please check the distance betw een the device location and the near by Terminal Doppler Weather Radar (TDWR). You can find the locations of the airport w eather radars from the W ireless Internet Service Providers Association (WISPA) database at http://spectrumbridge.com/udrs/home.aspx. If the distance from the device to any TDWR is less than 35 kms, then the radio is not allow ed to operate in channels closer than 30 M Hz relative to the TDWR frequency (above and below ). To protect these TDWR, the channels up to 30 M Hz must be blacklisted so they cannot be selected as operational channel. In addition to blacklisting of the channels, register the location of the device radio in the St rat umTM X5 - Saf et y and Regulat ory Guide 7 Regulat ory Inf ormat ion WISPA database, so that any interference caused by the operation of the radio can be addressed in compliance w ith the Part 15 requirements. For example: Consider the TDWR location at Phoenix, AZ operating at 5610 M Hz (N 33 25 14; W 112 09 46). If the device is installed w ithin 35 kms radial distance from this location then avoid operating in (5580 - 5640) M Hz band. Also, blacklist all channels overlapping the 5580 - 5600 M Hz band (5600 - 5650) is already removed from operation list of our device). 1.3 Indust ry Canada Com pliance The Stratum devices comply w ith Canadian ICES-003 and license-exempt RSS standard(s). The device operation is subject to the follow ing conditions: · This device may not cause interference · This device must accept any interference, including interference that may cause undesired operation of the device WARNING: · High-pow er radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 M Hz and 5650-5850 M Hz and that these radars could cause interference and/or damage to LE-LAN devices. NOTES: · This device and its antenna(s) must not be co-located or operated in conjunction w ith any other antenna or t ran sm it t er. · Under Industry Canada regulations, the radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated pow er (e.i.r.p.) is not more than that necessary for successful communication. · The devices are designed to operate w ith disabled operation betw een 5600-5650 M Hz w ithin the 5470-5725 M Hz band. · The device automatically discontinues transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes w hich is required by the technology. · Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate these devices. · This radio transmitter has been approved by Industry Canada to operate w ith the antenna types listed below w ith the maximum permissible gain. Antenna types not included in this list, and having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use w ith this device. Conf orm it é Indust ry Canada Les appareils Stratum sont conformes aux normes canadiennes ICES-003 et RSS sans licence. Le fonctionnement de l' appareil est soumis aux conditions suivantes: · Cet appareil ne doit pas provoquer d' interférences. · Cet appareil doit accepter toute interférence, y compris les interférences qui peuvent provoquer un fonctionnement indésirable de l' appareil. ATTENTION: · Les radars haute puissance sont attribués en tant qu'utilisateurs principaux (c'est-à-dire utilisateurs prioritaires) des bandes 5250-5350 M Hz et 5650-5850 M Hz. Ces radars pourraient provoquer des interférences et / ou endommager les appareils LE-LAN. REM ARQUES: St rat umTM X5 - Saf et y and Regulat ory Guide 8 Regulat ory Inf ormat ion · Cet appareil et son (ses) antenne(s) ne doivent pas être co-localisés ou utilisés avec une autre antenne ou un autre ém et t eu r. · En vertu de la réglementation d' Industrie Canada, l' émetteur radio ne peut fonctionner qu' avec une antenne d' un type et d' un gain maximum (ou moindre) approuvés pour l' émetteur par Industrie Canada. Pour réduire les interférences radio potentielles pour les autres utilisateurs, le type d' antenne et son gain doivent être choisis de telle sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne soit pas supérieure à celle nécessaire pour une communication réussie. · L' appareil est désactivé entre 5600-5650 M Hz dans la bande 5470-5725 M Hz. · L' appareil interrompt automatiquement la transmission en cas d' absence d' informations à transmettre ou de panne de fonctionnement. Notez que cela ne vise pas à interdire la transmission d' informations de commande ou de signalisation ou l' utilisation de codes répétitifs requis par la technologie. · Tout changement ou modification non expressément approuvé par le fabricant peut annuler le droit de l' utilisateur à utiliser cet appareil. · Cet émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d' antennes énumérés ci-dessous avec le gain maximum autorisé. Les types d' antennes non inclus dans cette liste, et ayant un gain supérieur au gain maximum indiqué pour ce type, sont strictement interdits d' utilisation avec cet appareil. Frequency Band (5.250-5.250)GHz / ((5.470-5.725)GHz / (5.725-5.850) GHz (5.725 - 5.850) GHz (2.402 - 2.480)GHz Antenna Type Panel Omni Directional Sect o r Panel (In t eg rat ed ) Parabolic Dish PCB M aximum Gain (dBi) 28 12 21 19 35 2 1.3.1 IC Radiat ion Exposure St at em ent This device complies w ith IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated w ith a minimum distance betw een the antenna and the user according to the below table. Under such configuration, the IC RSS-102 radiation exposure limits set forth for an population/uncontrolled environment can be sat isf ied . Déclarat ion d'exposit ion aux radiat ions Cet équipement est conforme aux limites d' exposition aux rayonnements IC RSS-102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de distance entre la source de rayonnement et votre corps conformément au tableau ci-dessous. Dans ces conditions, les limites d' exposition aux rayonnements IC RSS-102 établies pour un environnement non contrôlé peuvent être satisfaites. Antenna M odel TM 55D-HVOM NI-12 Frequency (M Hz) 5225 to 5350 5470 to 5725 5725 to 5850 M inimum Separation Distance (CM ) 20 20 33 St rat umTM X5 - Saf et y and Regulat ory Guide 9 Regulat ory Inf ormat ion 5250 to 5350 20 TM 55D-HVSCTR-21 5470 to 5725 20 5735 to 5850 51 5250 to 5350 45 M T-466010/NVH 5470 to 5725 45 5725 to 5850 114 TM 55L-DPDISH 5725 to 5850 255 5250 to 5350 20 M A-WA57-QP4M IM O19 5470 to 5725 20 5725 to 5850 51 PCB Antenna 2402 to 2480 20 1.4 European (ETSI) and UK Com pliance The Stratum devices comply w ith the Low Voltage Directive (LVD) (2014/35/EU) and Radio Equipment Directive (2014/53/EU). Compliance w ith these directives implies conformity to harmonized European standards (European Norms). 1.4.1 Count ries of Operat ion and Condit ions of Use The devices may be used in the follow ing EU and EFTA countries: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, M alta, Netherlands, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sw eden and the United Kingdom. The professional installer must use the configuration utility provided w ith the device to ensure that EIRP and the channels of operation are in conformance w ith the spectrum usage rules for EU and EFTA countries as described below. 1.4.2 5GHz Operat ion The installer must use the configuration utility provided w ith the device to ensure the channels of operation are in conformance w ith the spectrum usage rules. The device employs a radar detection feature required for European Community and EFTA country operation in the 5 GHz band. This feature is automatically enabled w hen the country of operation is correctly configured for any European Community or EFTA country. The presence of nearby radar operation may result in temporary interruption of operation of this device. The radar detection feature w ill automatically restart operation on a channel free of radar. 1.4.3 Transm it Pow er Cont rol (TPC) f or 5 GHz operat ion It is recommended not to disable ATPC on the device. How ever, if you w ish to manually set TPC level, use professional installer services to ensure TPC level is set properly and complies w ith European regulatory requirements. NOTE: The TPC procedure should be repeated w hen relocating the w ireless device w ithin the current w ireless netw ork or to a w ireless netw ork in a new location. St rat umTM X5 - Saf et y and Regulat ory Guide 10 Regulat ory Inf ormat ion 1.5 Cert if icat ion Sum m ary 1.5.1 USA (See USA - Certification) M odels SX5-1040A -US SX5-1042A -US Frequency Band (5.150 - 5.250)GHz (5.250 - 5.350)GHz (5.500 - 5.725)GHz (5.725 - 5.850)GHz (2.402 - 2.480)GHz for BLE Certification/ Reference Number FCC ID: HZB-GIGA5 1.5.2 Canada (See CANADA - Certification) M odels SX5-1040A -WD SX5-1042A -WD Frequency Band (5.150 - 5.250)GHz (5.250 - 5.350)GHz (5.500 - 5.725)GHz (5.725 - 5.850)GHz (2.402 - 2.480)GHz for BLE Certification/ Reference Number IC:1856A-GIGA5 1.5.3 ETSI (See ETSI - Certification) M odels SX5-1040A SX5-1042A Certification/ Reference Number CE 1.5.4 UK (See UK - Certification) M odels SX5-1040A SX5-1042A Certification/ Reference Number UKCA 1.5.5 CB (See CB - Test Certificate) M odels SX5-1040A SX5-1042A Certification/ Reference Number JPTUV-151216 St rat umTM X5 - Saf et y and Regulat ory Guide 11 I n f o r m a t i o n f o r Pro f e ssi o n a l I n st a l l e r This chapter contains information on the follow ing: · Information for Professional Installers Adjusting Tx Output Power Antenna Gain Configuration 2 2.1 Inf orm at ion f or Prof essional Inst allers All products must be professionally installed, and the transmit pow er of the system must be adjusted by the professional installers to ensure that the system EIRP is in compliance w ith the limit specified by the regulatory authority of the country of ap p licat io n . 2.1.1 Adjust ing Tx Out put Pow er NOTE: When the system is set to transmit at the maximum pow er, professional installers must ensure that the maximum EIRP limit is not exceeded. To achieve this, they may have to add attenuation betw een the device and the antenna w hen a high gain antenna is used. Use the follow ing formula in combination w ith the table of EIRP limits in US and EU countries to calculate system transmit pow er (based on EIRP limits) of these countries: Tx Pow er (dBm) = EIRP Limit (dBm) + FL (dB) G (dB) w here, Tx Pow er = Output pow er measured at the antenna input EIRP Limit = EIRP limits specified below FL = Feeder loss including loss of connectors G = Antenna Gain Transmit output pow er can be reduced by using Automatic Transmit Pow er Control (ATPC), or manually setting the Transmit Pow er Control (TPC). For information to automatically or manually set TPC, refer to Softw are M anagement Guide available at http://support.proxim.com. Regulatory Domain United States 5GHz United States 5.8GHz United States1(5.3, 5.4 GHz) Frequency (M Hz) US SKU 5150 ~ 5250 (Non-DFS) 5250 ~ 5350(DFS) 5500 ~ 5725(DFS) 5725 ~ 5850 (Non-DFS) 5725 ~ 5850 (Non-DFS) 5250 ~ 5350(DFS) 5500 ~ 5725(DFS) M ax EIRP (dBm) PTP M ode (QB) PTM P M ode (M P) 30 30 53 36(Base Station), 53(Subscriber Unit) 30 30 St rat umTM X5 - Saf et y and Regulat ory Guide 11 Inf ormat ion f or Prof essional Inst aller United States2(5.3, 5.8 GHz) United States3 (5.2, 5.8 GHz) 5250 ~ 5350(DFS) 30 5725 ~ 5850 (Non-DFS) 5150 ~ 5250 (Non-DFS) 53 5725 ~ 5850 (Non-DFS) World 5 GHz United States 5GHz WD SKU 5150 ~ 5925 (Non-DFS) 100 5150 ~ 5250 (Non-DFS) 5250 ~ 5350(DFS) 53 5500 ~ 5725(DFS) 5725 ~ 5850 (Non-DFS) United States 5.8GHz United States1 (5.3, 5.4 GHz) United States2 (5.3, 5.8GHz) United States3 (5.2, 5.8 GHz) Canada 5 GHz 5725 ~ 5850 (Non-DFS) 53 5250 ~ 5350(DFS) 5500 ~ 5725(DFS) 5250 ~ 5350(DFS) 5500 ~ 5725(DFS) 5150 ~ 5250 (Non-DFS) 5725 ~ 5850 (Non-DFS) 5150 ~ 5250 (Non-DFS) 5250 ~ 5350(DFS) 5470 ~ 5600(DFS) 5650 ~ 5725(DFS) 5725 - 5.850 (Non-DFS) 30 53 53 23 (Indoor) 30 53 Europe 5.4 GHz Europe 5.8 GHz UK 5.8 GHz 5470 ~ 5600 (DFS) 30 5650 ~ 5725 (DFS) 5725 ~ 5875 (DFS) 36 5725~5795 36 5815~5850 30 36(Base Station), 53(Subscriber Unit) 100 36(Base Station), 53(Subscriber Unit) 36(Base Station), 53(Subscriber Unit) 30 36(Base Station), 53(Subscriber Unit) 36(Base Station), 53(Subscriber Unit) 23 (Indoor) 30 36(Base Station), 53(Subscriber Unit) 30 36 36 IMPORTANT! You must add external attenuation pad if the calculated EIRP is over the limit. If you are at the TPC limit, reduce the power and continue with the attenuation. 2.1.2 Ant enna Gain Conf igurat ion When using external antenna, the professional installer should ensure to configure proper antenna gain so that the radio does not exceed the EIRP allow ed per regulatory domain. St rat umTM X5 - Saf et y and Regulat ory Guide 12 Inf ormat ion f or Prof essional Inst aller Calculate the antenna gain as follow s: Antenna Gain to be configured = Antenna Gain of the antenna used - Cable Loss Example: Consider an example w here the device is operating in United States 5.3 GHz w ith the EIRP 30 dBm. The antenna gain of the antenna used is 23 dBi and the cable loss is 1dB. Given this case, Configurable Antenna Gain = [23 dBi 1 dB] = 22 dBi M aximum Radio Pow er = EIRP Configured Antenna Gain = 30 dBm 22 dBi = 8 dBm W ith this configuration, the ATPC feature w ill limit the radio pow er to a maximum of 8 dBm to avoid exceeding EIRP limit of 30 dBm. St rat umTM X5 - Saf et y and Regulat ory Guide 13 USA - Ce r t i f i ca t i o n Given below are the USA certification details for the follow ing products: · SX5-1040A -US · SX5-1042A -US A St rat umTM X5 - Saf et y and Regulat ory Guide 14 USA - Cert if icat ion St rat umTM X5- Saf et y and Regulat ory Guide 15 USA - Cert if icat ion St rat umTM X5- Saf et y and Regulat ory Guide 16 CA N A D A - Ce r t i f i ca t i o n Given below are the USA certification details for the follow ing products: · SX5-1040A -WD · SX5-1042A -WD B St rat umTM X5 - Saf et y and Regulat ory Guide 17 CANADA - Cert if icat ion St rat umTM X5 - Saf et y and Regulat ory Guide 18 ETSI - Ce r t i f i ca t i o n Given below are the products w ith the ETSI Certification: · SX5-1040A · SX5-1042A C St rat umTM X5 - Saf et y and Regulat ory Guide 19 ETSI - Cert if icat ion St rat umTM X5 - Saf et y and Regulat ory Guide 20 ETSI - Cert if icat ion St rat umTM X5 - Saf et y and Regulat ory Guide 21 ETSI - Cert if icat ion St rat umTM X5 - Saf et y and Regulat ory Guide 22 ETSI - Cert if icat ion St rat umTM X5 - Saf et y and Regulat ory Guide 23 UK - Ce r t i f i ca t i o n Given below are the products w ith the authorization to use UL M ark: · SX5-1040A · SX5-1042A D St rat umTM X5 - Saf et y and Regulat ory Guide 24 UK - Cert if icat ion St rat umTM X5 - Saf et y and Regulat ory Guide 25 UK - Cert if icat ion St rat umTM X5 - Saf et y and Regulat ory Guide 26 UK - Cert if icat ion St rat umTM X5 - Saf et y and Regulat ory Guide 27 UK - Cert if icat ion St rat umTM X5 - Saf et y and Regulat ory Guide 28 CB - Te st Ce r t i f i ca t e Given below is the CB Test certification for the follow ing products: · SX5-1040A · SX5-1042A E St rat umTM X5 - Saf et y and Regulat ory Guide 35 CB - Test Cert if icat e St rat umTM X5 - Saf et y and Regulat ory Guide 36