RYOBI PRT100 Rotary Tool Accessory Guide
Operator's Manual
Safety Information
⚠️ DANGER: If you are changing an accessory immediately after use, be careful not to touch the collet, collet nut, or the accessory with your hands or fingers. You will get burned because of the heat buildup from cutting. Always use the wrench provided.
⚠️ WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.
Similar safety warnings were also provided in French and Spanish.
Accessory Table
| Figure | Qty | Accessory | Application | Max RPM |
|---|---|---|---|---|
| [Image: Cylindrical mandrel with groove] | 1 | 1/4 in. Drum Sanding Mandrel | Holding sanding drums | 35K |
| [Image: Conical grinding stone with pointed tip] | 1 | 1/4 in. Pointed Aluminum Oxide Grinding Stone | Sharpening and deburring metals, steel, and rust | 35K |
| [Image: Mandrel with screw thread] | 1 | 1/8 in. Screw Mandrel | Holding polishing wheels | 15K |
| [Image: Cylindrical abrasive bands] | 4 | (2) 1/4 in. 60 Grit Sanding Bands (2) 1/4 in. 120 Grit Sanding Bands |
Sanding wood, metal, and plastics | 35K |
| [Image: Circular felt wheels] | 3 | (2) 1/2 in. Felt Polishing Wheels (1) 1 in. Felt Polishing Wheels |
Polishing and buffing metals, stone, glass and ceramics | 15K |
| [Image: Vial containing polishing compound] | 1 | Polishing Compound Vial | Used with felt polishing wheels to polish metal and plastic | N/A |
| [Image: Cylindrical brush with steel bristles] | 1 | Carbon Steel Brush | Cleaning and deburring metal, rust and paint NOTE: NOT suitable for organic material. |
15K |
| [Image: Small cutting wheel with diamond grit on shaft] | 1 | 3/32 in. Diamond Wheel Point Engraving Cutter | Engraving metal, wood, plastics, and organic material | 35K |
| [Image: Cylindrical milling cutter] | 1 | 1/8 in. High-speed Cutter | Engraving metal, wood, plastics, and organic material | 35K |
| [Image: Small pointed engraving bit] | 1 | 1/16 in. Engraving Bit | Engraving metal, wood, plastics, and organic material | 35K |
| [Image: L-shaped wrench] | 1 | Wrench | Changing accessories on collet | N/A |
NOTE: After use with organic material, proper cleaning and sanitizing of the tool/bit is required. Any material including organic material cut or altered by this tool is not intended nor suitable for human consumption.
REIMAGINE WITH RYOBI - RYOBI Tools
