User Guide for BDE Technology Inc models including: BDE-RFM207 Matter Over Thread Demo, BDE-RFM207, Matter Over Thread Demo, Over Thread Demo, Thread Demo, Demo
BDE-RFM207(Multi-Protocol Based on CC2652R)-BDE Technology Inc.
File Info : application/pdf, 7 Pages, 1.35MB
DocumentDocumentMatter Over Thread Demo Based on BDE Thread Module Quick Start Guide Matter Over Thread Demo Quick Start Guide 1. Description An application showing the use of Matter on BDE 2.4GHz modules. The result should resemble this high-level block diagram: 2. Get Ready 2.1. Software and Tools CHIPTool APP QR Code 2.2. Hardware 1 x Android Phone 1 x BDE-RFM207 module 1 x BDE-MP2652R7A module 1 x BeagleBone Black 2 x Evaluation boards of BDE-EVB07 1 x Ethernet cable BDE Technology Inc. 1 / 7 info@bdecomm.com Matter Over Thread Demo Based on BDE Thread Module Quick Start Guide 3. Running Demo It is assumed that these devices are all on the same network (e.g. this can be accomplished by connecting all to a single Wi-Fi Router): Border Router and Matter controller (Android phone). 7.1. Install the CHIPTool APP Install the CHIPTool APP on your Android phone. The installation package is CHIPTool.apk in the folder. 7.2. Power on the Border Router Power on the Border Router. After one minute, the Border Router starts working, then proceed to the next step. 7.3. Device pairing Open the CHIPTool APP, click "PROVISON CHIP DEVICE WITH THREAD" and scan the QR code in this link: https://projectchip.github.io/connectedhomeip/qrcode.html?data=MT%3A6FCJ142C00KA0648G00 BDE Technology Inc. 2 / 7 info@bdecomm.com Matter Over Thread Demo Based on BDE Thread Module Quick Start Guide After the scan, the following will show (If the APP exits abnormally, reopen the APP and scan the QR code again): Power on the Matter device (BDE-MP2652R7A). After ten seconds or so, it will start to work. Press and hold the right button labeled BTN-2 on BDE-EVB07 for more than 1 second. Bluetooth LE will advertise. BDE Technology Inc. 3 / 7 info@bdecomm.com Matter Over Thread Demo Based on BDE Thread Module Quick Start Guide Click "SAVE NETWORK" to enter the pairing mode: The following message will pop up when the device is successfully paired: BDE Technology Inc. 4 / 7 info@bdecomm.com Matter Over Thread Demo Based on BDE Thread Module Quick Start Guide You can click "LIGHT ON/OFF & LEVEL CLUSTER" to enter the operation view and control the Matter device (BDE-MP2652R7A). BDE Technology Inc. 5 / 7 info@bdecomm.com Matter Over Thread Demo Based on BDE Thread Module Quick Start Guide On: Switch on the Red LED Off: Switch off the Red LED Toggle: Toggle the status of Red LED Read: Read the current status of the Red LED By now, you should run the lighting-app demo successfully. 4. Revision History Revision V0.1 Date Description 11-August-2023 Preliminary version, draft You can find the latest documentations with this Link. BDE Technology Inc. 6 / 7 info@bdecomm.com Matter Over Thread Demo Based on BDE Thread Module Quick Start Guide Important Notice and Disclaimer The information contained herein is believed to be reliable. BDE makes no warranties regarding the information contain herein. BDE assumes no responsibility or liability whatsoever for any of the information contained herein. BDE assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for BDE products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. Contact BDE Technology Inc. USA: 67 E Madison St, # 1603A, Chicago, IL 60603, US Tel: +1-312-379-9589 Website: http://www.bdecomm.com Email: info@bdecomm.com China: B2-403, 162 Science Avenue, Huangpu District, Guangzhou 510663, China Tel: +86-20-28065335 Website: http://www.bdecomm.com Email: shu@bdecomm.com BDE Technology Inc. 7 / 7 info@bdecomm.com
BDE Technology Inc.
CHIP: QR Code
BEAGL-BONE-BLACK by BeagleBoard.org Foundation | TI.com