Kreafunk aBEAT Qi Wireless ANC Headphones

Product Overview

The aBEAT Qi are wireless headphones featuring Active Noise Cancellation (ANC). They offer a premium listening experience with advanced features and a focus on sustainability.

This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at: Kreafunk.com/pages/declaration-of-conformity

The headphones are made from 100% recycled ABS plastic.

Key Features and Operations

Charging

Charge your aBEAT Qi to 100% before first use. A charging cable is included. You can charge wirelessly or via a USB-C cable ?. The indicator light turns red ? while charging and turns off when fully charged.

Charging time: 1.5 hours (USB & Qi).

Battery Status

The battery indicator is located on the left side of the headphones. A small red light ? illuminates when the battery level drops below 10%.

Powering On/Off

To turn on the aBEAT Qi, press and hold the power button for 3 seconds. The light beside the button will flash blue and red ??.

To turn off, press and hold the power button for 3 seconds.

Listening via Bluetooth

Find "aBEAT Qi" in your device's Bluetooth settings. The flashing light will stop once the headphones are connected to Bluetooth ?.

Manual Bluetooth Pairing

To manually connect the aBEAT Qi to Bluetooth, press and hold the power button for 3 seconds. The light will flash white.

Playback Control

To start or pause audio ▶️⏸️, press the power button once.

Track Control

To change tracks, hold the plus (+) or minus (-) button for 3 seconds.

Volume Control

To increase volume ?, press the plus (+) button. To decrease volume, press the minus (-) button.

Active Noise Cancellation (ANC)

To activate ANC ?, press the logo button once on the right side of the aBEAT Qi.

Phone Calls

To answer a call ?: press the power button once.

To reject a call: press and hold the power button for 2 seconds.

To hang up: press the power button once.

Voice Assistant

To activate the voice assistant ?️, press the power button three times.

Resetting the Headphones

First, remove "aBEAT Qi" from your device's Bluetooth list. To reset the headphones ?, press and hold both the plus (+) and minus (-) buttons for 3 seconds.

Technical Specifications

• Active noise cancellation (ANC): Yes
• Material: 100% recycled ABS plastic
• Water-resistant: IPX4
• Dimensions: 185*135*80 mm
• Weight: 200g
• Speaker: Ø40 mm 32Ω
• Playing time: Up to 20 hours (with ANC), Up to 30 hours (without ANC)
• Charging time: 1.5 hours (USB & Qi)
• Wireless charging: Supported
• Connectivity: Bluetooth version 5.0
• Range: Up to 10m
• Input power: 5V / 1A
• Frequency band: 2402-2480 MHz
• Maximal radio frequency effect: <3 dBm
• Features: Foldable, Adjustable fit, Replaceable ear cushions, Voice Assistant
• Battery: Built-in Lithium battery with 500mAh

Safety and Maintenance Instructions

Please read this operation manual carefully before use. Retain these instructions for future reference and follow them at all times.

• Keep the product away from heat sources such as radiators, heaters, or other appliances that produce heat.
• Place the headphones on a stable surface to prevent falls and potential damage or injury.
• Do not expose the product to direct sunlight for extended periods. High temperatures can shorten the product's lifespan, damage the battery, and deform plastic parts.
• Avoid exposing the product to extreme cold, as it may damage the internal circuit board.
• Do not leave the aBEAT Qi in your car, especially in direct sunlight.
• Do not charge in direct sunlight. The aBEAT Qi can operate and charge in temperatures ranging from -20°C to 60°C.
• Rechargeable batteries have a limited number of charge cycles. Battery life and the number of charge cycles vary depending on usage and settings.
• Avoid allowing liquids to enter the product.
• Before cleaning the headphones with a dry cloth, turn the power switch to the off position and unplug the power cord from the outlet.
• Do not throw, stamp on, or apply excessive pressure to the product, as this may damage the internal circuit board.
• Do not attempt to disassemble the product; this should only be done by a professional.
• Do not use concentrated chemical products or detergents for cleaning.
• Keep surfaces away from sharp objects, as these may cause damage to plastic parts.
• Use only 5V/1A power supplies. Connecting power supplies with higher voltage may lead to severe damage.
• Do not arbitrarily discard or place the lithium battery near fire or intense heat to avoid the risk of explosion.

If you experience any problems with your product, please contact the retailer you purchased it from. The retailer will provide guidance, and if the issue is not resolved, they will handle the claim directly with Kreafunk.