Hopup Backlit 2X2 Straight Tabletop Display

Product Overview

The Hopup™ 5ft (2 quad x 2 quad) straight backlit tension fabric display is a state-of-the-art, illuminated collapsible display that is simple, versatile, and can be set up in minutes. The Backlit Hopup 2x2 creates a dynamic display with vibrant LED lights that are long-lasting. Simply attach lights to the rear diffuser panel, attach the front graphic, and you have an eye-catching illuminated display. No tools are required for assembly. A rolling carry bag and protective molded case for storage and transport are included. An option is available to purchase the frame, lights, and case only.

Visual Description: A visual depicts the Hopup Backlit 2X2 Straight Tabletop Display set up with its vibrant fabric graphic, showcasing a tree design with pink and blue leaves against a blue background. The display is accompanied by a black, wheeled carrying case.

Features and Benefits

• Lightweight 5ft wide (2 quad x 2 quad) straight anodized silver frame.
• White in-molded hook and loop end caps.
• Supports an integrated fabric graphic mural with endcaps.
• Rear diffuser graphic panel for single-sided units.
• LED lights easily attach to the collapsible frame.
• Comes in a molded, wheeled OCX case.
• Lifetime hardware warranty against manufacturer defects on frame.
• Lights have a one-year limited warranty.

Specifications

Hardware

Assembled Unit

60.5"w x 60.5"h x 12"d (1537mm(w) x 1537mm(h) x 305mm(d))

Approximate Weight

31 lbs / 15 kg

Graphic

Refer to related graphic template for more information.

One year warranty.

Shipping

Packing Case(s)

1 OCX

Shipping Dimensions

40"l x 27"h x 18"d (1016mm(l) x 686mm(h) x 458mm(d))

Approximate Total Shipping Weight

63 lbs / 29 kg

Additional Information

Always unplug the two female connectors from the power supply when raising the frame up or down. ?

The manufacturer continually improves and modifies its product range and reserves the right to vary specifications without prior notice. All dimensions and weights quoted are approximate; no responsibility is accepted for variance. E&OE. See Graphic Templates for graphic bleed specifications.

Document Date: 11/20/2018

Kit Assembly

Step by Step

Step 1

Unpack the frame from the bag. Stand with backer side toward the floor. Stretch out the frame so it lays flat on the floor.

Visual Description: A small diagram shows a collapsed display frame.

Step 2

Lock the connecting arms into place. Stand the frame upright once all the connectors are securely snapped in the lock position.

Visual Description: Two images illustrate locking the frame arms. The first shows arms being pulled into place, with a red cross ❌ symbol indicating an incorrect action. The second shows arms securely locked, with a green checkmark ✔️ symbol indicating the correct state.

Step 3

Gather all the lighting strips and align so they are over each "X" of the frame, then pull the spring-loaded clip apart to fit onto the "X". Make sure the orientation of the male and female connectors allows for linking them together.

Visual Description: A diagram shows lighting strips being attached to the frame structure, with red arrows pointing to the connection points on the frame's 'X' joints.

Step 4

Connect the light strips in series for both top and bottom sides.

Step 5

Connect the long extension cord to the female end of the top light strips in series. Run the long extension cord down the side.

Visual Description: A diagram shows an extension cord being connected to the end of a series of lights, with a red arrow indicating the direction of the cord.

Step 6

First, attach the extension cord from the top row of lights to the bottom row of lights.

Visual Description: A diagram illustrates connecting the top row of lights to the bottom row using an extension cord.

Step 7

Attach the light strip to the power supply. Then, attach the power cord to the power supply. Plug in the power cord for test lighting.

Visual Description: Diagrams show the light strip connecting to a power supply unit, and a power cord connecting to the same unit. Labels 'Power Supply' and 'Power Cord' are present.

Step 8

Once the lights are all set, it is important to disconnect the power to the lights before applying the graphic. Lay the frame back down on the floor. Apply the graphic to the frame; the endcaps do not have to be immediately applied.

Visual Description: A diagram shows a backlit display frame lying flat, with a graphic being applied to it. The graphic itself is a blue background with a tree design.

Step 9

Stand the unit back to the upright position. Power On the lights and verify that they all work. Apply the end caps by wrapping them to the back side and velcro them closed. Setup Complete.

Visual Description: An image shows the fully assembled backlit display with its graphic. A smaller inset image shows hands applying the end caps to the back of the display.