G35 Smart Watch User Manual

Please read this instruction carefully before use.

Key Function

Press the power button to wake the screen. Short press to choose function options when the main dial is displayed. Slide up and down the screen to select functions such as calling, sports data, exercise, sports record, heart rate, sleeping, blood pressure, blood oxygen, information, weather, women's health, music, stopwatch, timer, alarm clock, mobile phone searching, and settings.

Long press the screen on the watch. After the dial becomes smaller, slide the screen left or right to change the dial.

Charging

Before using the watch for the first time, ensure it has enough power. If the watch cannot be powered on due to low power, charge it for about 2 hours. After charging, the watch will turn on automatically. Attach the magnetic cable to the charging position of the watch.

Controlling Center

Functions include: Do Not Disturb mode, brightness adjustment, settings, mobile phone searching, and audio switch.

Sports Data

Displays the number of steps, distance, and calorie data recorded on the day. The target number of steps, distance, and calories can be set in the APP.

Sports Modes

Options include: Walking, Running, Climbing, Cycling, Basketball, Badminton, Football, Elliptical, Yoga, Ping Pong, Rope Skipping, Tennis, Baseball, Rugby, Hula Hoop, Golf, Long Jump, Sit-ups, Volleyball.

Call Function

The call function is available when the Bluetooth of your phone and wrist are connected successfully and the mobile app is running in the background. You can make calls, answer calls, hang up, check call records, synchronize contacts, and adjust the volume from the watch.

Split Screen Mode

On the home screen, swipe to the right to enter the split screen mode, and then select the corresponding icon to open the split screen.

Mobile Phone Searching

After the watch is connected to the APP, click to find the phone, and the phone terminal will ring. The watch terminal will show that the search is successful. If the watch is not connected to the APP, the watch will prompt that it is not connected.

Settings

The setting function includes screen display (dial switch, screen light, duration brightness adjustment, wrist light duration), language, vibration intensity, menu style, battery, QR code, and system.

Sedentary Reminder

This function can be operated by APP [device] > [Sedentary Reminder]. You can set the start time, end time, and do not disturb time.

Water Drinking Reminder

This function can be operated by App [device] > [Water-drinking reminder]. You can set the start time, end time, and reminder interval.

Alarm Clock

After the watch is connected to the APP, you can set a single alarm clock, a recurring alarm clock, and a maximum of five alarm clocks.

Stopwatch

Click the start button to start the timing, click the pause button to pause the timing, or click the reset button to reset the timing to zero. A maximum of 99 pieces of data can be saved.

Timer

In the timer function, the system presets the common time duration. Users can click the corresponding time to do the quick timing, or click the custom button to set the time. Click the start button to start the timing, click the pause button to pause the timing, or click the reset button to reset the timing to zero.

Message

After the watch is connected to the APP, if you choose to receive the relevant information in the APP terminal, then the watch terminal will also receive this corresponding message. It can save the latest 15 messages at most.

Sports Record

This interface saves your exercise history records for 10 days and allows you to check the data, such as sports duration, heart rate, and calories.

Heart Rate

When you enter the heart rate measurement interface, you will see a green light at the bottom and a vibration reminder after about 40 seconds of measurement. If the message shows "Not wearing a watch", you need to wear the watch again.

Sleeping Mode

It shows the monitoring status of sleeping. The data is updated every day. When the APP is connected, the data can be saved synchronously, and the device will recalculate the data information of a new day. Sleep monitoring simulates the natural state of falling asleep and getting up. Wear the watch normally. Sleep data is not monitored during the day; the default sleep monitoring time is from 9:30 PM to 12:00 PM the next day.

Blood Pressure

When entering the interface of blood pressure measurement, the green light at the bottom will start to show up, and then it can measure for 30-60 seconds. There will be a vibration reminder when the measurement is completed. The measurement is based on PPG technology.

Blood Oxygen

When entering the interface of blood oxygen measurement, the green light at the bottom will start to show up, and then it can measure for 30-60 seconds. There will be a vibration reminder when the measurement is completed. The measurement is based on PPG technology.

Women's Health

After the watch is connected to the APP, the APP will show the health reminder for women, and you can check the related information on the watch.

Music

After the watch is connected to the APP, it can control the pause or start of the phone's music player, volume adjustment, and song switching.

Weather

After the watch is connected to the APP, the weather interface will display the real-time weather temperature and weather type.

Troubleshooting (FAQ)

The watch cannot be turned on

Hold down the power button for more than 3 seconds. It might be due to low battery power; please charge it in time.

Bluetooth is disconnected or unavailable

Restart the watch and connect it again.
Restart the Bluetooth of the mobile phone and connect it again.
Do not connect your phone to other Bluetooth devices at the same time.

Incorrect measurement of heart rate/blood pressure/blood oxygen

Poor contact between the watch sensor and the body is a common reason.
Ensure the sensor is in full contact with your wrist during measurement.
For users with darker skin and more arm hair, please open the App [device] > [intensification measurement] to make it more intensified.

Sleeping data is not accurate enough

Sleeping monitoring simulates the natural state of falling asleep and getting up. Wear the watch normally.
Wearing it when you fall asleep too late or begin to sleep may cause errors.
Sleep data is not monitored during the day. The default sleep monitoring time is from 9:30 PM to 12:00 PM the next day.