Kaabo Wolf Warrior X User Manual

Before You Start

This product is an electric scooter, used for short distance walking. Please use this product under safe road conditions.

It is important to read through, understand, and adhere to all the instructions and safety warnings in this manual before charging and operating this scooter.

Upon receiving and opening your box, please inspect the contents for signs of damage or loose screws from transport. If something doesn't feel right, please take a few pictures and contact your place of purchase immediately.

Your scooter comes with a 180-day limited warranty against manufacturing defects. In case of any issues beyond this time frame, we will still help you, but we may need to charge a fee for spare parts or repairs.

If you have purchased your scooter from a dealer other than kaabo.com, please contact them first in case of any issues. If you still need help or you have purchased directly from kaabo.com, please feel free to contact us with any questions or concerns.

Make sure you understand and adhere to local rules and regulations for riding electric scooters. Riding an electric scooter comes with inherent risks and hazards. To minimize the risk of falling or being injured, make sure you understand how to safely operate and control this scooter.

Always use good judgement, common sense, and protective gear.

Table of Contents

• BEFORE YOU START.................................................................................................................................. 1
• TABLE OF CONTENTS............................................................................................................................... 2
• GENERAL SAFETY WARNINGS............................................................................................................ 3
• WOLF WARRIOR OVERVIEW............................................................................................................... 4
• What's in the Box......................................................................................................................4
• Caution....................................................................................................................................... 5
• Product Structure......................................................................................................................7
• Name of each part..................................................................................................................... 8
• Product components.................................................................................................................................9
• How to use the product......................................................................................................................... 10
• How to use the instrument panel...................................................................................................13
• How to use a charger correctly............................................................................................................ 19
• Product Specification.............................................................................................................................. 21
• Adjustable color pedal lamp.......................................................................................................... 22

General Safety Warnings

• Always wear a helmet and protective safety equipment.
• Wear closed shoes without heels and ensure your laces are tied.
• Do not ride with more than one rider or exceed the weight limit of 120kg/265lbs. Only use your scooter in line with its intended purpose.
• Check your scooter for any loose parts or screws, flat tires, signs of damage or excessive wear before every ride. Stop operation immediately and contact your place of purchase if something does not feel right.
• Start riding slowly to familiarize yourself with the operation of your scooter. Start in first gear and slowly try out the brakes. Always slow down when riding over bumps or on rough road conditions. Keep the scooter away from children. It is not a toy. Riders must be age 16+ only.
• Do not use your electric scooter in heavy rain, or on surfaces covered by more than 1/2 inch of water. Do not submerge the scooter in liquid or let any liquid near the battery or electrical components.
• Do not lend your scooter to anybody unfamiliar with its operation. Ensure any new riders are familiar with these instructions and are wearing proper safety gear.
• Once riding in public space, you are subject to the risks faced by all traffic participants just like when you are riding a bike.
• Other traffic participants may not obey traffic regulations or may ride carelessly. The faster you ride your scooter, the longer it will take you to stop.
• The scooter may slip on slippery surfaces leading to subsequent injuries to the rider. Pay special attention crossing train tracks and/or when it is wet.
• Always use caution, adapt your speed to road and traffic conditions and keep distance from other traffic participants.
• Watch out for pedestrians. Do not use your scooter in any way that could harm pedestrians. Slow down when you are passing them to avoid accidents.
• You must follow all local traffic rules and regulations.

Mantis Overview

What's in the Box:

The box typically contains:

• Electric scooter
• User Manual
• Standard charger
• Tool

Matters needing attention:

1. The braking distance will be extended in wet weather.
2. Different materials and components may react differently to wear or fatigue. If the intended life of a component has been exceeded, it may suddenly break, thus potentially causing harm to the user. Cracks, scratches, and discoloration in areas susceptible to high stress indicate that the component has outlived its service life and should be replaced.
3. Please check the light and road conditions when using at night.

Battery Specifications: Rated Capacity: 60V 21AH / 28AH / 28.8AH. Input: 67.2V 2A.

WARNING! Please turn off the scooter when charging.

WARNING! Don't charge a flooded scooter and check with a professional.

WARNING! Don't charge the scooter when no one is present or while sleeping.

WARNING! Don't charge the scooter if you find an electric shock and check with a Professional.

WARNING! Don't charge or leave the battery storage under a high-temperature above 45 degrees.

WARNING! Don't touch the charging port with wet hands.

WARNING! Do not charge near fire.

Caution

Even if the product is within the warranty period, you may be liable for any accident caused by any of the following causes:

1. Be careful of water! This product and its components are not waterproof. Don't let water get into the product and components. Never use it if the road is wet due to rain, snow, or hailstone. Washing or spraying water on electric devices can result in malfunction or fire.
2. Beware of folding and spinning parts! If parts of the body, such as a finger or hair, get caught in the spinning or folding parts of the product, this may lead to severe injuries. Please be careful.
3. No acrobatics Stunts and jumps such as jumping and dropping are prohibited as they can cause a great impact on the product and can lead to malfunction and accidents.
4. No companion boarding This product is intended for one adult only; children, infants, or two people are prohibited from boarding.
5. Don't tune by yourself Do not open or tune the electric parts (battery, controller, or motor system).
6. Comply with related laws Unlicensed driving, driving after drinking, and loading cargo on the scooter are prohibited. (More than a bike or bicycle license is required). Please comply with the Road Traffic Act and related laws and regulations according to the place of use.
7. Beginners and seniors are encouraged to use at low speed Beginners who are not accustomed to use the product, seniors, and others should avoid high-speed mode driving and use low-speed driving. In addition, please practice how to ride safely in a wide place before riding.
8. Do not sudden brake with front brake If there is a risk of overturning, sudden deceleration should be done safely. Do not apply any unusual behaviors or artificial forces, such as stopping with your feet.
9. Do not accelerate downhill Slow down at downhill. When reducing speed, to prevent brake overheat, use the brakes properly to reduce the heat on the disk with proper brake use.
10. Do not drive on steep slopes Acceptable gradeability is different for each product. Excessive hill roads exceeding the specification may cause damage to the product (parts) due to temperature cut, overcurrent, or low voltage cut, which may cause the product to malfunction.
11. Safety warning when lifting the product If the product is lifted by holding only the handle, there is a possibility that the product may be damaged due to deformation of the folding part due to load or movement of the product. When lifting the product, be sure to hold the product's body (footrest) with one hand and hold the handle with the other hand so that you do not get hurt in your back or knees.
12. Be sure to wear safety equipment For the safety of passengers, be sure to wear a full face helmet and other protective gear (knee, elbow, hand, upper body) and do not wear shoes such as slippers or high heels that interfere with driving.

Precaution before driving:

1. Night driving should be avoided in any case. Be sure to wear helmets and other guards (knees, elbows, hands, upper body, etc.) and drive safely.
2. Select the mode that suits you and drive. In order to cope with a sudden situation, exercise to slow down and hold the brake at all times.
3. When turning left/right, slow down to avoid danger of overturning or slipping, and then turn safely.
4. To go backward, it is safe if you get off from the product after stopping before moving.
5. It is prohibited to use in a slippery place, a crowded place, a steep slope, roads with a risk of accident, or uneven road.
6. When crossing a pedestrian crossing, get off from the product for pedestrian safety.
7. Do not drive in a threat to any other means of transport, such as animals, pedestrians, bicycles, motorcycles, cars, etc.
8. If you pass speed bumps and obstacles, be sure to slow down.
9. When decelerating or braking, do not stop with using your foot, but stop with using the brake appropriately.
10. Be careful that there is a risk of burns due to heat from the motor and brake (especially disk rotor) after driving.
11. It is prohibited to drive with one hand holding the handle.
12. Do not ride or drive when the kickstand is down.

Product Structure

Electric Wiring Diagram

The electric wiring diagram illustrates the connections between components such as the Main Controller, Deputy Controller, Battery, Front Motor, Rear Motor, Lights, and Charging Mouth. Specific connections are indicated by plugs and sockets (e.g., XHB 8P, XT30, XT60) and wire colors.

Diagrams are provided for Wolf Warrior X PLUS / Wolf Warrior X PRO+ and Wolf Warrior X GT models.

Product Size

Unfolded Dimensions: 1228mm (height) x 1251mm (length).

Folded Dimensions: 578mm (height) x 1251mm (length).

Name of Each Part

Handle

• Handlebar fixing QR lever
• LCD/Minimotor/TFT display
• Finger throttle (Kaabo Trigger)
• Brake lever (+Electronic brake)
• Brake lever (Electronic brake)
• Handle grip
• Multi-function Switch
• Handle base
• Driving mode selection button
• Motor system selection button

Body frame

• Handle stem
• Handle post (Steering tube)
• Headlight
• Lock Clamp
• Front Fender
• Front suspension
• Front motor
• Charging Port switch
• Pedal light
• Rear fender
• Rear light (Brake light)
• Rear motor

Product Components

Checking the components inside of the box

Typically includes: Standard battery charger (2A), Standard tool, User manual, Labeling, Body (Lithium battery included).

Taking out the scooter from the box

Caution: Do not hold the handlebar only when lifting the product from the box. Please be careful that the fixing slide of the folding part may be damaged, and a safety accident such as a part of the body may be caught. Therefore, when lifting the product, it is necessary to raise the handlebar first, and then slowly lift the body (footrest) of the product with both hands and do not damage the folding part.

Make a note of the serial number

The serial number can be used to check information such as date of purchase, warranty period, etc. Product information can be checked even if the product is lost or stolen. (May vary depending on branch office situation.)

Ensure instrument screws are tightened.

How to Use the Product

1) Product folding

1. Raise the handle post (Steering tube): Release the locking clamp, raise the locking slide upwards, raise the handle post, then lower the locking slide downward.
2. Lock the folding parts: Tighten the finishing screw properly to lock the clamp, so that the locking slide is firmly fixed in any direction, and check for looseness during use.

2) How to start

Step 1. Turning on the main switch: When turning on the product, you can start driving by turning on the main power switch first (when using the built-in battery) and turning on the power of the LCD panel. When driving is finished, turn off the LCD panel and turn off the main power.

Note: The power of the instrument panel will turn off automatically after a few minutes of inactivity. At this time, the LED lamp is also turned off, so turn it off with the LED lamp button when you turn it on again, and turn off the main power switch after use.

Step 2. Stance for driving: After tilting the kickstand, find a stable position on the footrest and then hold the handle grip comfortably. Be careful not to raise your foot on the rear fender.

Step 3. Acceleration and deceleration: Acceleration can be performed by using the throttle of the instrument panel while driving, and the deceleration or stop can be performed by holding the brakes on the handle.

Caution: Before driving, be sure to check the folding part, the handle part, the part where the main fixing part of the product is fastened well. And check the position of the fixing slide, the QR lever locking status, and the folding part fixing status.

Throttle malfunction caution: Regardless of whether the throttle is operated or not, the motor sensor may continue to operate, causing malfunctions such as sudden acceleration. In this case, holding the brake lever to cancel the operation. This phenomenon may be caused by corrosion of the throttle, immersion of the throttle, disconnection of the magnet, broken off levers, and breakage of the spring. Do not bounce the throttle lever strongly.

3) How to stop

Be sure to use the rear brake first for decelerating when stopping while driving. For a safe stop, it is necessary to practice slowing down after deceleration with the rear brake.

Always use the front and rear brake levers together to stop smoothly and safely after decelerating with the rear brake.

Set the use and strength of the electronic brake among the detailed functions of the instrument panel before driving. When the brake lever works, the electronic brake works together to increase the braking force.

Tip: Check for safe braking

• For safe braking, check whether the brake lever and disc caliper connection (wire damage, external breakage, etc.) are damaged before and after driving, and check brake wear and looseness of the brake inner core (inner wire). In the case of hydraulic brakes, it is also necessary to check for oil leakage or deficiency and always check that the braking force is sufficient.
• Due to various factors such as road surface condition and speed, it may not be possible to stop when the brake is operated as expected. The electronic brake and ABS functions are auxiliary functions to further increase the braking force. The user should understand the function and expect the operation timing when using this function.

4) Product folding

(Refer to section 1) Product folding above for detailed steps.)

How to Use the Instrument Panel

Caution

Display Elements:

1. Speedometer: Shows the speed at which you are travelling.
2. Battery Indicator: Shows the level of the battery. Charge your scooter frequently; do not let it run out of battery. As a rough guideline, charge at or below 2 bars.
3. Gear: Shows the selected gear.
4. Gear selector: Press to set gear (1=slow, 2=medium, 3=fast).
5. Power Button: To turn the scooter on or off, press the button for 2 seconds.
6. Accelerator: Pull to accelerate. The stronger you pull, the faster it accelerates. The scooter is delivered in “Non-Zero Start” setting (Kick-And-Go is ON), i.e., the accelerator only works if the scooter is already in motion.
7. Mode Button: Press to select various display options:

P-SETTINGS

Cruise Control

Cruise control allows you to maintain your driving speed automatically without continuing to hold down the accelerator. In order to enter Cruise Control, activate it first in the P-settings [P6].

While driving, keep the accelerator steady for 3-5 seconds until Cruise Control kicks in and the scooter travels at a constant speed without the driver holding down the accelerator. When you activate the brakes, Cruise Control will be cancelled. CAUTION: Ride in a position where you can immediately access the brake to cancel Cruise Control if necessary.

Option 1: (Instrument panel display details)

Option 2: See the details in the attached manual.

How to Use a Charger Correctly

1) Basic charging method

1. Open the charging port cap and connect the charger connector to the scooter's charging port and then connect the charger to a household outlet.
2. Observe the charging status indicator: (Red) Charging, (Green) Charging complete.
3. Be sure to close the charging port cap when driving or storing, except when charging.
4. When connecting the connector to the charging port, metallic sparks due to voltage difference may be splashed, but this is normal.

Failure of the charger and abnormal conditions can cause electric shock and fire. Learn the correct usage and prevent safety accidents in advance.

2) Basic charging method (Continued)

• Manufacturers and sellers are not responsible for any problems arising from any disassembly, modification, or mixing with other chargers.
• The charger is forbidden to be used in places subject to high humidity, heat, flammable materials, or confined spaces, or where there is no ventilation, such as in a car.
• The charger is not waterproof. It is thoroughly controlled to prevent moisture from entering the charger.
• Children and pets should not be allowed to approach the charger when they come into contact with them, as they may cause an electric shock.
• If the charger lamp does not light, the charger falls, experiences strong external shock, or the cable is damaged, discontinue use immediately and contact the service center.
• Unplug the charger when you are away from home for long periods of time.
• Use only the genuine charger.
• Do not insert conductors into the charging port.
• Do not touch the plug for about 10 seconds after unplugging the charger. There is a risk of electric shock from instantaneous discharge.
• Do not remove the terminal during charging. This can damage the internal circuit of the charger and cause malfunction.
• Do not operate the product during charging.
• Charging terminals should be firmly contacted during charging and should not be used if terminals are corroded or damaged.
• When disconnecting the charger from the product, it is safe to hold the terminal without holding the wire.

Short-circuit Caution: Be careful not to short-circuit the battery, as short-circuiting of the battery is very dangerous.

Over current Note: The battery of this product is designed to automatically shut off the power supply to protect the battery when the over current is over 100A.

Low Voltage Caution: The battery of this product is designed to be automatically shut off when the voltage drops below 48V. Do not use the product in the low voltage state.

Lithium Battery Care and Safety

• Lithium batteries should be protected from direct exposure to children and pets.
• Lithium battery performance is affected by external temperature. In winter, when the temperature is low, the performance of the battery is temporarily deteriorated, and the mileage and power output are reduced.
• Lithium batteries have a characteristic that discharge performance is reduced by more than 15% when charging/discharging 300 times or more. If usage time is shortened due to long usage, it should be replaced with a genuine one through the nearest point.
• Charging: Lithium battery should be used only with the genuine battery and charger supplied from the manufacturer. Any problems caused by use of a battery not made by the manufacturer, mixed use, or using an unapproved charger are not covered by the manufacturer. Charging the lithium battery with a non-genuine charger may cause malfunction or fire. The lithium battery should be charged in a well-ventilated, dry place, and around the charger in a place where there is no inflammable material. Lithium battery should be charged at 0~45°C and discharged within -10~60°C. Charging or discharging at a temperature outside this range may cause malfunction, fire, or explosion. In case of moving from cold outside to warm indoors, please charge it after 1-2 hours. This is to prevent condensation from occurring inside the product due to temperature difference.
• Storage: Lithium batteries should be kept away from snow, rain, and direct sunlight. Do not store or charge them in a trunk or hot room. Select a dry place and store at room temperature (10~20°C). When storing for more than 3 months, charge the remaining battery level to 70~80% (do not store fully charged).
• Trouble symptom, safety: Lithium battery should be discontinued immediately if it is damaged or shows leakage of battery, sour odor, or appearance deformation, etc., and contact the place of purchase to get technical support and service. If overheat, smoke, or ignition is detected in a product with a lithium battery, immediately stop charging and use, move the product outdoors as soon as possible, and then use a fire extinguisher to evolve. Do not spray water or immerse the product in water to evolve, which is more dangerous. Lithium battery packs have very high energy density, so if you charge the battery for a long time in case of short-circuit, leakage, or a bad battery, etc., there is a possibility of ignition. Therefore, you should avoid charging for a long time without a person present, and charging must be done while a person is aware that the risk of unexpected fire can be avoided.
• Misuse: If the lithium battery is short-circuited or the polarity is changed, or if the battery is impacted, malfunction or fire may result. If you think that the battery has been impacted, you should stop charging and using it and visit the nearest point for inspection.
• Water inflow: It should be controlled to prevent water inflow into the lithium battery. There is a risk of fire or electric shock if the charger is connected while moisture is present.
• Caution: Disconnect the battery from the main unit and prohibit recharging, reinstalling, or using other applications.
• Disposal: When disposing of the lithium battery, the battery should be separated from the product at the point of purchase or near the point so that the charge and discharge terminals are not short-circuited. Dispose of it as industrial waste when disposing of it.

Battery disassembly prohibited

Danger: Battery disassembly, modification, and repair are not covered under warranty.

Product Specification

*The specification can be changed by manufacturer without notice to improve the quality and safety for users.

*The distance can be affected by loaded weight, wind direct (wind speed), road condition, slope, and tire condition.

MEMO: Adjustable color pedal lamp

Features:

1. Nearly 100 lighting modes available.
2. Free choice of colors.
3. Color brightness and change speed can be adjusted at will.