NAKAYAMA PRO Oil Harvesting Machine
Models: NZ1100, NZ1200
Product Codes: 051367, 051374
Website: WWW.NIKOLAOUTOOLS.GR
Safety Rules and General Instructions
Prudence is essential for preventing accidents. This machine is designed and manufactured in accordance with Directive 2006/42 EC.
Safety Symbols:
- ▲ DANGER: Indicates serious hazards.
- ▲ WARNING: Accompanied by essential messages and hints.
- ▲ CAUTION: Appears with safety messages.
The manual is an integral part of the machine and must accompany it. It should be kept in a safe place by responsible personnel. Markings and inscriptions must be maintained and replaced if illegible. The machine must be used by responsible, trained persons. Minors should not use the machine. Keep others, especially children and animals, away from the operating area. The operator is responsible for any accidents or damage.
Physical Condition of Operators
Operators must be in good physical and mental health. Avoid operating when tired. Consult a doctor if you have health conditions that may be aggravated by strenuous work. Prolonged use can cause hand problems due to vibrations; wear protective gloves and keep hands warm. Maintain handles in good condition. Persons with pacemakers should consult their doctor. Limit use to 1.5 hours per day. Wear comfortable clothing and anti-slip boots. Use hearing protection and never listen to music while operating. Be prepared for emergencies with a first aid kit and emergency phone numbers.
Environmental Protection
Equipment contains reusable/recyclable materials. Deliver to an approved recycling center (♻️). Comply with local environmental regulations.
Using the Machine
Operate by one person. Keep others away. Maintain balance, especially on slippery or uneven ground. Use only in outdoor, well-ventilated areas. Be aware of exhaust gases. If trees have been sprayed with pesticides, be informed about the chemicals. Avoid dust and pollen if allergic. Plastic rods continue to move after motor shutdown; do not prevent their movement to avoid overheating. Maintain stable rotation speed to prevent wrist injuries and vibrations. Work calmly, avoid foreign objects, extreme weather, and obstacles. Never use near power lines. Hold the machine with both hands. Avoid foreign objects during branch shaking. Clear the work area. Only operators are allowed within a 5-meter radius.
Protective Equipment:
- Protective helmet: Recommended
- Hearing protection: Recommended
- Safety goggles: Mandatory
- Protective gloves: Mandatory
- Anti-slip work boots: Recommended
Powering the Motor Generator
The motor generator uses a gasoline and oil mixture as fuel, which is highly flammable. Avoid ignition sources and smoking. Exhaust gases can cause health problems; wear a breathing mask if necessary. Fuel outdoors in well-ventilated areas. Always switch off the engine when refuelling. Open the filler cap slowly to avoid pressure buildup. Never open the cap while the motor is running. Clean the filler cap area and check for leaks.
Start of Operation
Do not start operation if the rotation speed has not been set correctly. Maintain balance and be careful of obstacles. Do not work in extreme weather conditions or on unstable ground. Never use near power lines. Hold the machine with both hands. Avoid foreign objects during branch shaking. Clear the work area.
Motor Failures and Maintenance
Keep ventilation holes clean. Common motor failures include worn carbon brushes (replace after 150-200 hours), short circuits (check wires), and overheating (check reducer/fan; repair by qualified technician). Ensure carbon brushes are replaced in pairs.
Malfunctions - Troubleshooting
If resistance is encountered, stop rotation. Clean the head gear from dust and impurities. Remove and clean/lubricate bearings and gears.
Technical Data
| MODEL | NZ1100 OLIVE HARVESTER MACHINE (DYNAMO/BATTERY) | NZ1200 OLIVE HARVESTER MACHINE (BATTERY) | NZ1000 * OLIVE HARVESTER GENERATOR |
|---|---|---|---|
| Power | 250 W | 250 W | 6.5 hp / thread shaft |
| Voltage | 12 V | 12 V | 12 V |
| Length | 2.3 m | 2.3 m | |
| Weight | 2.8 kg | 2.8 kg | |
| Cable Length | 14.5 m | 14.5 m | |
| Capacity | 200 kg/h | 200 kg/h | |
| Motor | Magnetti Marelli | Magnetti Marelli | |
| Other (Tip) | Named "Star", vibrating, urchin-shaped tip, made of carbon fibre | Named "Star Plus", vibrating, urchin-shaped tip, made of carbon fibre | |
| Current: 70 A | |||
| Speed: Variable | |||
| Motion: with wheels | |||
| Base: antivibration | |||
| Design: Ergonomic | |||
| Function: connection with up to 4 olive harvester rods. |
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice. Repair, inspection, and replacement work must be carried out only by authorized service technicians. Always use supplied equipment.
Maintenance - Repair and Storage
Maintenance and repair must be performed by trained persons. Use only genuine replacement parts. Perform work only when the machine is switched off. Carbon brushes last approximately 200 hours. Lubricate the gear chain, upper end, and plunger yearly. Keep motor ventilation holes clean.
Markings
Markings identify the machine type and highlight hazards. Keep all markings clean and replace if damaged.
Key Markings:
- 1. Read user instructions.
- 2. Always wear protective goggles.
- 3. Wearing protective gloves is mandatory.
- 4. Risk of burns (motor).
- 5. Conductive materials: Keep away from power sources.
- 6. Do not expose the machine to rain.
Warranty Information
The product comes with a warranty period (24 months for non-professional use, 12 months for professional use) starting from the date of purchase, verified by the purchase document. The warranty covers manufacturing defects and material flaws, with free repair or replacement of defective parts at the manufacturer's discretion. It excludes parts subject to natural wear and tear, damage from improper use, modifications by unauthorized persons, or incorrect maintenance. The warranty does not extend the warranty period. Greek law applies to this warranty.
