Klock Werks
User Manual for KLOCK Werks models including: Motorcycle Handlebar Mount, Handlebar Mount, Mount
Klock Werks Ambidextrious iOmount Indian Challenger 2020-2022 - Cycle Gear
Klock Werks Ambidextrious iOmount Indian Challenger 2020-2022 - RevZilla
cituojant MH MOUNT · Cituoja 6 — We do not recommend using full-size tablets or other larger devices on model-specific, nomad™,. nomadXL™, or nomad ™ mounts.
File Info : application/pdf, 6 Pages, 951.16KB
DocumentDocumentwelcome to i mounts® MOTORCYCLE HANDLEBAR MOUNT WATCH THIS VIDEO 1:27 / 3:20 SCAN HERE Learn how to adhere the iOdiscTM correctly to guarantee a wonderful experience. GETKLOCKED.COM/HOWTO iOmountsTM COMPONENTS iOdiscTM KEEP EXTRAS ON HAND! Once an iOdisc is adhered to a device, it can readily use the iOmounts system. iOcoreTM CUSTOMIZE YOUR LOOK The magnetic iOcoreTM (the powerhouse in this system) is available in multiple colors. DEVICE TETHER The Device Tether can be used with almost any smartphone to give an added sense of security and piece of mind when using or mounting your smart device. Place tether tab through charging port. Snap phone back in place in your case. Attach lanyard to tether tab and GO! INSTALLATION When adhering the iOdiscTM allow adhesive to set at least 24 hours before attaching to iOcore. For best results, let set 72 hours before first use. 1 2 3 ADHERE Clean the surface of your device case and allow to dry. Center the iOdiscTM on your case then apply with firm pressure to the case while on a flat surface and adhere. INSTALL The Semisphere bracket bolts to the stock controls. Remove 2 bolts from the controls, line up the mount, and use the included hardware to tighten. Follow factory torque specs. ATTACH Once the iOdiscTM has cure for 24 hours, your device is ready to be attached to any iOmount®! A FEW TIPS AND TRICKS... We do not recommend using full-size tablets or other larger devices on model-specific, nomadTM, nomadXLTM, or nomad+TM mounts. While a very strong 3M VHB adhesive is used, the iOdiscTM will not stick to all surfaces and materials. This includes rubber, silicon, soft-touch and other soft and/or textured surfaces. For best results, Klock Werks recommends the use of a smooth plastic, non-silicone case. Each iOdiscTM utilizes permanent adhesive and is very difficult to remove once applied. Klock Werks and/or iOmountsTM are not responsible for any damages caused by the removal of the iOdiscTM. WARNING: When riding or driving, please follow your state laws regarding device use. QUESTIONS? DON'T HESITATE TO REACH OUT WEBSITE GetKlocked.com EMAIL info@getklocked.com CALL (605) 996-3700 CONNECT TO EVEN MORE... Connect to stands, wall mounts, car mounts and more. Find it all at: GETKLOCKED.COM SHARING IS CARING! LIKE, TAG OR SHARE. #GETKLOCKED