Instruction Manual
Model: Staircase handrail 32mm pipe diameter black series
Product Contents and Accessories
Before proceeding with installation, please verify that the model meets your needs and that all materials are present and correct.
General Contents Image Description:
A cardboard box containing black pipe sections, floor flanges (bases), tee connectors, and smaller pipe pieces, some wrapped in protective plastic.
Contents Breakdown by Length:
- 5-foot product: Includes one pipe armrest, two tee bases, two short pipe connections, two pipe caps, and one package.
- 8-foot product: Includes two pipe armrests, three tee bases, two short pipe connections, two pipe caps, and one package.
- 10-foot product: Includes three face pipe armrests, four tee bases, two short pipe connections, two round pipe caps, and one package.
Accessory Quantities and Visuals:
| Name of accessories | Expansion pipe and screw (Image: White plastic wall plug with black screw) |
Screwdriver (Image: Red and black handled screwdriver) |
|---|---|---|
| 5 feet of spare parts | 8 sets | 1PCS |
| 8 feet of spare parts | 12 sets | 1PCS |
| 10 feet of spare parts | 16 sets | 1PCS |
Installation Steps
-
Step 1: Verify Contents.
First, please check whether the model meets your needs; second, please check whether the quantity of material is correct as detailed above.
-
Step 2: Assemble Pipe Sections.
As shown in the accompanying visuals, connect the long face pipe, the tee base, the short pipe, and the round pipe cap in sequence.
Visual Description: Hands are shown assembling various black pipe components, including connecting pipes to tee bases and attaching end caps.
-
Step 3: Mark Installation Position.
After determining the pre-installation position on the wall, use a marker pen to make a hole mark at the corresponding installation hole position for the flange.
Visual Description: A hand holds a pipe flange against a wall and uses a marker pen to indicate where to drill holes.
-
Step 4: Drill and Insert Expansion Tube.
As indicated in the drawing, punch the hole in the marked position on the wall and insert the expansion tube (wall plug).
Visual Description: A hole is drilled into a wall, and a white plastic expansion tube is inserted into the hole.
-
Step 5: Secure with Screws.
Attach the pipe flange to the wall over the expansion tube and tighten the screws securely using a screwdriver.
Visual Description: A pipe flange is positioned over the wall plug, and screws are driven through the flange into the wall using a screwdriver.
