TP-Link WLAN Bluetooth PCI Express Adapter Quick Installation Guide

1. Connect to a Computer

1. Turn off your computer, unplug the power cable, and remove the case panel.
2. Connect the provided USB cable to the adapter.
3. Locate an available PCIE X1 slot and carefully insert the adapter.

4. Note: If the bracket is not suitable for your computer, detach it from the adapter's board and replace it with the low-profile bracket.

5. Locate an available F_USB connector and carefully plug the USB cable into it.
6. Connect the antenna(s) to the adapter.

7. Note: To maximize performance, make sure the path between the antenna(s) and your router is clear.

8. Replace the case panel, plug in the power cable, and turn on your computer.

2. Install Drivers

You can install drivers from the provided CD or download the latest version from the TP-Link support website.

Download URL: Intel Wi-Fi 6E AX210 Downloads

Install the Wi-Fi and Bluetooth drivers by following the on-screen instructions.

3. Join a Wireless Network

1. Click the network icon on the taskbar.
2. Select your Wi-Fi network, click Connect, and enter the password when prompted.

4. Pair With Bluetooth Devices

1. Right-click the Bluetooth icon on the taskbar. If it's not displayed, turn on Bluetooth in your PC settings first.
2. Select "Add a Bluetooth Device" or "Add a Device" to scan for available devices.
3. Select your Bluetooth device from the list and follow the on-screen instructions to complete pairing.

4. Note: Make sure your device's Bluetooth is enabled and discoverable.