HomeHome
Instruction Manual for KOLINK models including: Unity Peak ARGB, Peak ARGB, ARGB
UNITY PEAK ARGB | kolink.eu
Connect up to 6 fans to the ARGB fan hub controller. 4 fans are pre-installed. Connect additional fans to the free PWM headers. Connect the.
File Info : application/pdf, 3 Pages, 406.44KB
DocumentDocumentUNITY PEAK ARGB ARGB INSTALLATION MANUAL Power Connection Fan PWM Cable Mainborad PWM Header FAN6 PWM Signal Cable: Connect to MB FAN1 FAN2 FAN3 FAN4 FAN5 Included in the package: ARGB fan hub controller, remote control. SATA Power Cable: Connect to PSU Connect up to 6 fans to the ARGB fan hub controller. 4 fans are pre-installed. Connect additional fans to the free PWM headers. Connect the PWM signal cable to a free mainboard PWM fan header (e.g. CHA_FAN1) to control the fan speed via the mainboard. Connect the SATA power cable to a free SATA power connection on your PSU. Note: Only use the PWM headers of the ARGB fan hub controller to control fans. AIO pumps require PWM headers with constant 12V from your mainboard. www.kolink.eu Page 1/2 UNITY PEAK ARGB ARGB INSTALLATION MANUAL ARGB Connection Mainboard 5V ARGB Header 5V ARGB MB-Sync.Cable: Connect to MB ARGB1 ARGB2 ARGB3 ARGB4 ARGB5 ARGB6 Fan 5V ARGB Cable Connect up to 6 ARGB devices to the ARGB fan hub controller. 4 fans are pre-installed. Connect additional ARGB devices to the free headers. Connect the 5V ARGB MB sync. cable to the mainboard 5V ARGB header to control the lighting via the mainboard. Note: The controller only supports 5V ARGB (5V/Data/-/GND) devices. Please check the manual of your mainboard for supported connectors. www.kolink.eu Page 1/2 UNITY PEAK ARGB ARGB INSTALLATION MANUAL Remote Control Functions Lock current Mode/Colour Lighting On/Off Decrease Speed Previous Mode Decrease Brightness Mainboard Sync On/Off Increase Speed Next Mode Decrease Brightness Start Auto-Cycle Effects Preset Colours www.kolink.eu Page 2/2