BANNER GS60 Pro Multicolor Guide Spotlight Instruction Manual

Instruction Manual for BANNER models including: GS60 Pro Multicolor Guide Spotlight, GS60 Pro, Multicolor Guide Spotlight, Guide Spotlight, Spotlight

GS60 Pro Multicolor Guide Spotlight Product Manual

Industry Canada ICES-003(B) ... Industry Canada ICES-003(B)............................................................................................

GS60PRGBWL9Q | GS60 Pro Multicolor Guide Spotlight

14 апр. 2025 г. — One high-intensity LED; see models table for color temperature or ... GS60 Pro Multicolor Guide Spotlight Product Manual. 14-Apr-25 page 10 of 18.

File Info : application/pdf, 18 Pages, 2.84MB

243622

GS60 Pro Multicolor Guide Spotlight Product Manual
Original Instructions p/n: 243622 Rev. A 30-Dec-24 © Banner Engineering Corp. All rights reserved.

Contents
Chapter 1 Features ................................................................................................................. 3
Model Key...................................................................................................................................................................................................... 3
Chapter 2 Wiring...................................................................................................................... 4 Chapter 3 Pro Editor ............................................................................................................... 5
Full Preview Connection (Required).............................................................................................................................................................. 5 Pro Editor Configuration for the GS60 Pro .................................................................................................................................................... 6
Discrete Control ...................................................................................................................................................................................... 6 Pulse Control .......................................................................................................................................................................................... 7
Chapter 4 Specifications ........................................................................................................ 9
FCC Part 15 Class B for Unintentional Radiators........................................................................................................................................ 10 Industry Canada ICES-003(B)..................................................................................................................................................................... 10 Dimensions ...................................................................................................................................................................................................11 Optical Data ................................................................................................................................................................................................. 12
Chapter 5 Accessories.......................................................................................................... 14
Cordsets ...................................................................................................................................................................................................... 14 Mounting Accessories.................................................................................................................................................................................. 14 Power Supplies............................................................................................................................................................................................ 16
Chapter 6 Product Support and Maintenance .................................................................... 17
Clean with Mild Detergent and Water .......................................................................................................................................................... 17 Repairs ........................................................................................................................................................................................................ 17 Contact Us ................................................................................................................................................................................................... 17 Banner Engineering Corp Limited Warranty................................................................................................................................................ 17
Mexican Importer .................................................................................................................................................................................. 17
© Banner Engineering Corp. All rights reserved.

GS60 Pro Multicolor Guide Spotlight Product Manual

Chapter Contents Model Key ............................................................................................................................................................................................................ 3

Chapter 1

Features

· 12 V DC to 30 V DC operation · 60 mm diameter and 30 mm mounting base · Rugged sealed housing rated to IP66 and IP67 · Cooling rib design for thermal management when used at the highest output for an
extended period of time
· Seven default colors in one device (Green, Red, Yellow, Blue, White, Cyan, Magenta)

IMPORTANT: Read the following instructions before operating the light. Please download the complete GS60 Pro Multicolor Guide Spotlight technical documentation, available in multiple languages, from www.bannerengineering.com for details on the proper use, applications, Warnings, and installation instructions of this device.
IMPORTANT: Lea el siguiente instructivo antes de operar el luminario. Por favor descargue desde www.bannerengineering.com toda la documentación técnica de los GS60 Pro Multicolor Guide Spotlight, disponibles en múltiples idiomas, para detalles del uso adecuado, aplicaciones, advertencias, y las instrucciones de instalación de estos dispositivos.
IMPORTANT: Lisez les instructions suivantes avant d'utiliser le luminaire. Veuillez télécharger la documentation technique complète des GS60 Pro Multicolor Guide Spotlight sur notre site www.bannerengineering.com pour les détails sur leur utilisation correcte, les applications, les notes de sécurité et les instructions de montage.

Model Key

Housing
GS60P
60 mm diameter Proenabled Guide Spotlight

Color RGBW RGBW = Multicolor

Lens Angle L9
9 = ± 9 degree lens

Control

Connection

Blank = Constant power plus Q = Integral 5-pin M12 male

three inputs

quick-disconnect connector

CAUTION: Risk Group 2: Possibly hazardous optical radiation emitted from this product.
Do not stare at the operating lamp. May be harmful to the eyes. Risk Group 2 (RG 2) products generally do not pose a realistic optical hazard if aversion responses limit the exposure duration or where lengthy exposures are unrealistic.
- IEC 62471

30-Dec-24

page 3 of 18

GS60 Pro Multicolor Guide Spotlight Product Manual

Chapter Contents
Chapter 2

Wiring

Diagram

bn (1)
bu (3)
1 bk (4) wh (2)
2 gy (5)
3

1230 V DC

Pinout

Pin Number Wire Color

Pin 1

Brown

Pin 2

White

Pin 3

Blue

Pin 4

Black

Description 12 V DC to 30 V DC Input 2: 12 V DC to 30 V DC DC common Input 1: 12 V DC to 30 V DC

Pin 5

Gray

Input 3: 12 V DC to 30 V DC

Default Color Definition
Input 1 Input 2 Input 3

Red

Yellow

Green

Cyan

Blue X

Magenta X
X

An "X" denotes an active input. For example, when Input 1 and Input 3 are active, the spotlight is magenta.

White X X X

30-Dec-24

page 4 of 18

GS60 Pro Multicolor Guide Spotlight Product Manual

Chapter Contents
Full Preview Connection (Required)..................................................................................................................................................................... 5 Pro Editor Configuration for the GS60 Pro ........................................................................................................................................................... 6

Chapter 3

Pro Editor

Use Banner's Pro Editor software and Pro Converter Cable to create custom configurations by selecting different colors, flash patterns, and animations. For more information visit www.bannerengineering.com/proeditor.

Full Preview Connection (Required)
The full preview connection must be used for the GS60 Pro Multicolor Guide Spotlight.

A = Pro Converter Cable (MQDC-506-USB)

B = Splitter (CSB-M1251FM1251M)

C = PC running Pro Editor software

D = Any Banner Pro Series-enabled device (K50 shown) E = Power Supply (PSW-24-1, PSW-24-2, or PSD-24-4)

F = 8-Pin to 5-Pin Double-Ended Cordset (MQDC-801-5M-PRO),

required for 8-Pin models

A
C
D B
F

30-Dec-24

page 5 of 18

GS60 Pro Multicolor Guide Spotlight Product Manual
Pro Editor Configuration for the GS60 Pro

Pro Editor

Banner's Pro Editor software offers an easy way to configure Pro Series-enabled indication, touch, and illumination devices, allowing users full control of device states and device logic modes. The easy-to-use configuration software provides a variety of tools and capabilities to solve a wide range of applications such as indicating machine status or warm-up time, indicating unique steps in an assembly process, or incorporating status information into touch buttons.
Setup any Pro Series-enabled device using the free Pro Editor software, available for download at www.bannerengineering.com/proeditor.
Discrete Control
Selecting the Discrete Control tile displays three I/O State tiles: · Basic · Advanced · I/O Block

Basic I/O State Basic three-state control. Configurations made in Basic I/O State assign one wire to one state, with the following override control:
· Pin 1 (Brown) overrides Pin 4 (Black) · Pin 2 (White) overrides Pins 1 and 4 (Brown and Black) · Pin 5 (Gray) overrides Pins 1, 2, and 4 (Brown, White, and Black)

page 6 of 18

30-Dec-24

Pro Editor

GS60 Pro Multicolor Guide Spotlight Product Manual

Advanced I/O State Advanced, default I/O state, with seven state options for maximum configuration ability. Configurations made in Advanced I/O State assign binary wiring combinations of all valid inputs to each state.

I/O Block I/O State Three-state control for use with I/O block. Configurations made in I/O Block assign state to the black, white, and combination of black and white wires for use with the I/O blocks, for which power (brown) and common (blue) are always on for five-pin connections.

Pulse Control
Selecting the Pulse Control tile displays up to sixteen states that correspond to input frequencies on the white wire. The number of states (1) and input characteristics (2) are user-defined. Ranges are calculated (3).

30-Dec-24

page 7 of 18

GS60 Pro Multicolor Guide Spotlight Product Manual

Pro Editor
3

page 8 of 18

30-Dec-24

GS60 Pro Multicolor Guide Spotlight Product Manual

Chapter Contents
FCC Part 15 Class B for Unintentional Radiators .............................................................................................................................................. 10 Industry Canada ICES-003(B)............................................................................................................................................................................ 10 Dimensions..........................................................................................................................................................................................................11 Optical Data........................................................................................................................................................................................................ 12

Chapter 4

Specifications

Supply Voltage 12 V DC to 30 V DC Use only with a suitable Class 2 power supply (UL) or SELV power supply (CE) See the electrical characteristics on the product label.
Supply Current

12 V DC 0.415

Typical Current

24 V DC 0.2

30 V DC 0.165

Maximum Current
A
0.5

Supply Protection Circuitry Protected against reverse polarity and transient voltages
Light Source One high-intensity LED; see models table for color temperature or wavelengths
Construction Black anodized aluminum housing Polycarbonate window Nickel-plated quick-disconnect connector Black anodized aluminum mounting nut
Mounting 30 × 1.5 mm thread base mount Optional M48 knurl nut for front mount; see "Mounting Accessories" on page 14
Connections Integral 5-pin M12 male quick-disconnect connector
Operating Temperature 40 °C to +50 °C (40 °F to +122 °F)
Storage Temperature 40 °C to +70 °C (40 °F to +158 °F)
Environmental Rating IP66, IP67
LED Lifetime Lumen Maintenance - L70 When operating within specifications, the output decreases less than 30% after the following time periods: 36,000 hours

Required Overcurrent Protection

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations.

Overcurrent protection is required to be provided by end product application per the supplied table.
Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to www.bannerengineering.com.

Supply Wiring (AWG)
20
22
24

Required Overcurrent Protection (A)
5.0 3.0 1.0

Supply Wiring (AWG)
26
28
30

Required Overcurrent Protection (A)
1.0 0.8 0.5

Vibration and Mechanical Shock Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 15G 11 ms duration, half sine wave)
Certifications
Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM
Turck Banner LTD Blenheim House Blenheim Court Wickford, Essex SS11 8YT GREAT BRITAIN
LOW VOLTAGE LUMINAIRE
E338626

30-Dec-24

page 9 of 18

GS60 Pro Multicolor Guide Spotlight Product Manual

Default Indicator Characteristics

Color
Blue Green Red Orange Amber Yellow Lime Green Spring Green Cyan Sky Blue Violet Magenta Rose White

Dominant Wavelength (nm) or Color Temperature (CCT)
450 520 623 597 587 575 559 515 495 487 4000K

0.1584 0.1493 0.688 0.5811 0.5224 0.4435 0.3582 0.1499 0.1581 0.1554 0.2358 0.404 0.5462 0.3792

Color Coordinates(1)

0.022

0.6898

0.3043

0.3812

0.4228

0.4789

0.5405

0.6279

0.3757

0.2657

0.1094

0.2096

0.2664

0.3902

Specifications
Lumen Output (Typical at 25 °C)
31.7 188 140 155 161.1 156.6 166.2 177.5 158.6 143 114.6 146.1 145 257.8

FCC Part 15 Class B for Unintentional Radiators
(Part 15.105(b)) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
(Part 15.21) Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
Industry Canada ICES-003(B)
This device complies with CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and 2) This device must accept any interference received, including interference that may cause undesired operation.
Cet appareil est conforme à la norme NMB-3(B). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas occasionner d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du dispositif.

(1) Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates.

page 10 of 18

30-Dec-24

Specifications

GS60 Pro Multicolor Guide Spotlight Product Manual

Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change.

M48 x 2

Ø60.0 [2.36]

19.0 [0.75]

49.0 [1.93]

14.0 [0.55]

M30 x 1.5

M12 x 1 - 6g

77.0 [3.03]

30-Dec-24

page 11 of 18

GS60 Pro Multicolor Guide Spotlight Product Manual

Specifications

Optical Data
Performance Curves Lux values shown are typical at 25 °C.

Distance (m)
0.17 0.33 0.5 0.67 0.83 1

98,620 31,480 14,100 7,965 5,240 3560

Max Center Beam Illuminance (Lux) White

The optical data shown above is for white only. To get the lux values for other colors, multiply the values in the table above by the following factors:

Red Green Blue Cyan Magenta Yellow White

Color

0.433 0.986 0.146 0.833 0.542 0.709 1

Multiplier

Beam Width FWHM (mm) 300

18 (± 9°)

Beam Angle FWHM (Deg)

page 12 of 18

30-Dec-24

Specifications

GS60 Pro Multicolor Guide Spotlight Product Manual

Isolux Pattern GS60 Multicolor
mm

200

100

200

Percentage of Max.

100

Light Intensity (Lux)

80-100%

60-80% 0
40-60%

20-40%

100

0-20%

200 Mount height of 1 meter (1 m)

30-Dec-24

page 13 of 18

GS60 Pro Multicolor Guide Spotlight Product Manual

Chapter Contents
Cordsets ............................................................................................................................................................................................................. 14 Mounting Accessories ........................................................................................................................................................................................ 14 Power Supplies .................................................................................................................................................................................................. 16

Chapter 5

Accessories

Cordsets

Model
MQDEC-501SS
MQDEC-503SS MQDEC-506SS MQDEC-512SS MQDEC-515SS MQDEC-530SS MQDEC-550SS

Length

5-Pin Double-Ended M12 Female to M12 Male Cordsets

Style

Dimensions

Pinout (Male)

0.31 m (1.02 ft)

0.91 m (2.99 ft) 1.83 m (6 ft) 3.66 m (12 ft) 5 m (16.4 ft) 9 m (29.5 ft) 15 m (49.2 ft)

Male Straight/ Female Straight

40 Typ.
M12 x 1 ø 14.5
44 Typ.
M12 x 1 ø 14.5

2 4

1 = Brown 2 = White 3 = Blue

Pinout (Female)

2 1

4 = Black 5 = Gray

Model
MQDEC-501RS
MQDEC-503RS MQDEC-506RS MQDEC-512RS

Length

5-Pin Double-Ended M12 Female to M12 Male Cordsets

Style

Dimensions

Pinout (Male)

0.31 m (1.02 ft)
0.91 m (2.99 ft) 1.83 m (6 ft) 3.66 m (12 ft)

Male Right-angle/ Female Straight

32 Typ. [1.26"]
30 Typ. [1.18"]

M12 x 1 ø 14.5 [0.57"]
44 Typ. [1.73"]

ø 14.5 [0.57"] M12 x 1

2 4

1 = Brown 2 = White 3 = Blue

Pinout (Female)

2 1

4 = Black 5 = Gray

Mounting Accessories
All measurements are in mm.
ACC-GS60 M48 Front Mount
· Black anodized knurl nut for panel sealing · Included gasket should be against the product to seal the surface · Through-wall (near-flush) mounting to protect the product behind a wall

M48 X 2

Ø60

30-Dec-24

page 14 of 18

Accessories
SMB30A · Right-angle bracket with curved slot for versatile orientation · Clearance for M6 (¼ in) hardware · Mounting hole for 30 mm sensor · 12-gauge stainless steel
Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 × 6.3, C=ø 30.5
SMB30SC · Swivel bracket with 30 mm mounting hole for sensor · Black reinforced thermoplastic polyester · Stainless steel mounting and swivel locking hardware included
Hole center spacing: A=ø 50.8 Hole size: A=ø 7.0, B=ø 30.0
SMB30FA · Swivel bracket with tilt and pan movement for precise adjustment · Mounting hole for 30 mm sensor · 12-gauge 304 stainless steel · Easy sensor mounting to extrude rail T-slot · Metric- and inch-size bolt available
Bolt thread: SMB30FA, A= 3/8 - 16 × 2 in; SMB30FAM10, A= M10 - 1.5 × 50 Hole size: B= ø 30.1
SMBAMS30RA · Right-angle SMBAMS series bracket · 30 mm hole for mounting sensors · Articulation slots for 90°+ rotation · 12-gauge (2.6 mm) cold-rolled steel
Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 × 7.0, B=ø 6.5, C=ø 31.0
SMB30MM · 12-gauge stainless steel bracket with curved mounting slots for versatile orientation · Clearance for M6 (¼ in) hardware · Mounting hole for 30 mm sensor
Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 × 7, B = ø 6.4, C = ø 30.1
SMBAMS30P · Flat SMBAMS series bracket · 30 mm hole for mounting sensors · Articulation slots for 90°+ rotation · 12-gauge 300 series stainless steel
Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 × 7.0, B=ø 6.5, C=ø 31.0

GS60 Pro Multicolor Guide Spotlight Product Manual

45 61
69

C
B A

67 B
58

83.2

36.3

68.9

45 53
48

C
A B

70 57
A

57
C B

30-Dec-24

page 15 of 18

GS60 Pro Multicolor Guide Spotlight Product Manual
Power Supplies
PSW-24-1 · 24 V DC, 1 A Class 2 UL Listed power supply · 100 V AC to 240 V AC 50/60 Hz input · 2 m (6.5 ft) PVC cable with M12 quick disconnect · Includes Type A (US, Canada, Japan, Puerto Rico, Taiwan), Type C (Germany, France, South Korea, Netherlands, Poland, Spain, Turkey), Type G (United Kingdom, Ireland, Singapore, Vietnam), and Type I (China, Australia, New Zealand) AC detachable input plugs
PSW-24-2 · 24 V DC, 2 A Class 2 UL Listed power supply · 100 V AC to 240 V AC 50/60 Hz input · 3.5 m (11.5 ft) PVC cable with M12 quick disconnect · Includes Type A (US, Canada, Japan, Puerto Rico, Taiwan), Type C (Germany, France, South Korea, Netherlands, Poland, Spain, Turkey), Type G (United Kingdom, Ireland, Singapore, Vietnam), and Type I (China, Australia, New Zealand) AC detachable input plugs

Accessories

TYPE A

TYPE G

TYPE C

TYPE I

page 16 of 18

30-Dec-24

GS60 Pro Multicolor Guide Spotlight Product Manual

Chapter Contents
Clean with Mild Detergent and Water................................................................................................................................................................. 17 Repairs ............................................................................................................................................................................................................... 17 Contact Us.......................................................................................................................................................................................................... 17 Banner Engineering Corp Limited Warranty....................................................................................................................................................... 17

Chapter 6

Product Support and Maintenance

Clean with Mild Detergent and Water
Wipe down the enclosure and the display with a soft cloth that has been dampened with a mild detergent and warm water solution.
Repairs
Contact Banner Engineering for troubleshooting of this device. Do not attempt any repairs to this Banner device; it contains no field-replaceable parts or components. If the device, device part, or device component is determined to be defective by a Banner Applications Engineer, they will advise you of Banner's RMA (Return Merchandise Authorization) procedure.
IMPORTANT: If instructed to return the device, pack it with care. Damage that occurs in return shipping is not covered by warranty.
Contact Us
Banner Engineering Corp. headquarters is located at: 9714 Tenth Avenue North | Plymouth, MN 55441, USA | Phone: + 1 888 373 6767
For worldwide locations and local representatives, visit www.bannerengineering.com.
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
Mexican Importer
Banner Engineering de Mèxico, S. de R.L. de C.V. | David Alfaro Siqueiros 103 Piso 2 Valle oriente | San Pedro Garza Garcia Nuevo Leòn, C. P. 66269
81 8363.2714

30-Dec-24

page 17 of 18

References

AEM Guides