POE Injector, POE Switch, POE Splitter, POE Surge Supplier
Instruction Manual for PROCET models including: PTD2206002 PT-PTC-A-BT Ethernet Adaptor, PTD2206002, PT-PTC-A-BT, Ethernet Adaptor, Adaptor
Download Zone | Procet
Support | Procet
File Info : application/pdf, 10 Pages, 1.24MB
DocumentDocumentPT-PTC-A-BT Ethernet Adaptor Fast Installation Manual WWW.PROCETPOE.COM Data Code:PTD2206002 Statement Copyright ©2022 Creative Lianjie Network Technology Co., Ltd. Copy right, all rights reserved. The contents of this manual cannot be copied, plagiarised, or translated by any company or individual without the express written permission of Creative Lianjie Network Technology Co., Ltd. Meanwhile, it can not be spread for profit in any way. (Electronic, Photocopying, Recording, etc.) This product complies with the design requirements for environmental protection, please do not dispose of this product as general garbage! Users should dispose of it separately from household waste when throwing it away. Sorting is helpful to save natural resources and reduce environmental pollution. Please dispose of in accordance with the disposal method of waste electronic products in your area. It is a registered trademark of Creative Lianjie Network Technology Co., Ltd. Protected bylaw, infringement must be investigated. The product specifications and technical contents of this manual are for reference only and are subject to update without notice. It is only used as a guide, unless there is a special agreement, and none of the statements made constitute a warranty of any kind. --1-- Product Profile PT-PTC-A-BT is a network power adapter designed based on the IEEE802 .3at standard. The output is a standard Type-C in terface, which can provide 5V/3A 9V/3A 12V/3A 15V/3A 20V/3A power supply. PT-PTC-A-BT is designed with a small volume of a white plastic case, which is convenient since it can be carried around on the desktop or can be fixed and opened for use. The input and output of the device do no t exceed thesafe voltage of 57V, and there is no need for electric shock protection. The product has passed the EU CE certifiction. The device needs to be used in a wired network 1-1. Product Display environment that supports IEEE802.3bt, plug and play without configuration, and the output supports PD3.0 fast charging protocol, which can provide continuous power supply to low- power mobile devices such as mobile phones, gameconsoles, and tablet computers. --2-- Product Working Diagram PoE IN USB Type-c 1 2 Power Link/Act 3 4 Data And Power 1.RJ45 Port Input Power Supply LED Indicator (Yellow) Light On: Normal power supply Light Off: Abnormal power supply 2.Type-C Port Output Power Supply LED Indicator (Green) Light On: Normal connection Light Off: Abnormal connection 3.RJ45 Port 4.Type-C Port 2-1 Product Working Diagram --3-- Product Working Diagram Input Input PoE Compliance Pin Assignment 44-57V DC IEEE802.3 bt 4/5(+),7/8(-) Or3/6(+),1/2(-) Or 3/6(-),1/2(+) Output Output Data Speed Operating Temperature 5V 3A 9V 3A 12V 3A 15V 3A 20V 3A None -20 To 40 Work Environment Operating Humidity Operating Altitude Storage Temperature 20%-80%No Condensation Below2000m -20-70 Storage Humidity 10%-90%No Condensation Internet Protocol None Network Transmission None Certificate CE IP Class IP40 Dimensions 100mm×60mm×22mm --4-- Green LED Yellow FCC EMC CE Product Working Diagram Light On: Normal connection Light Off: Not connected or failed to connect Blinking: Data transfer Light On: Normal power supply Light Off: Abnormal power supply FCC CFR47 Part 15 EN 55032-2015 EN 55035-2017 --5-- Product Dimensions 100MM 60MM 22MM Pic3-1 Product Dimensions --6-- Product Use Pic5-1 Product Connection Diagram Notice: 1. Connect the PoE network cable to the RJ45 port of this Power Adaptor, use a CAT5 or above network cable, and the length should be less than 100m . 2. Connect one end of the Type-C cable to the output port of this product, and the other end to the powered device (Such as a mobile phone, tablet computer,etc.) 3. If you need to replace the Type-C cable, please purchase a genuine cable that supports 100Mbps data transmission. --7-- Declaration of Toxic and Hazardous Substances Item Measures for the Administration of the Restricted Use of the Hazardous Substances Contained inElectrical and Electronic Products Restricted Substances or Elements Pb Hg Metal Parts × Plastic Parts PCB × Element Parts × Paper Accessories Cd Cr VI PBB PBDE This form is prepared in accordance with the provisions of SJ/T 11364 -2014. Indicates that the content of this hazardous substance in all homogeneous materials of this part is with in the limit requirements specified in GB/T26572 -2011. × It means that the content of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirement specified in GB/T26572 - 2011. There is currently no mature alternative in the industry, which meets the environmental protection requirements of the EU RoHS directive . 1. Before using the device, please be sure to read the manual carefully and perform ! standardized operations . 2. This device is only used indoors, please place it in a ventilated and dry place. --8-- This product should not be discarded after the expiration date or after maintenance. Please hand it over to a company qualified for the disposal of waste electronic products. Please refer to the national or local regulations on the disposal of WEEE for the correct method. Product Quality Certificate Qualification Card PASS Creative Lianjie Network Technolgy Co.Ltd www.procetpoe.com