CARDO & INSTA 360

UNIVERSAL CONNECTIVITY

Group Call Recording (DMC only)

Change to Bluetooth® Intercom mode.
Start pairing.
Start pairing on Insta360 ACE/ACE PRO/X4, then select Packtalk PRO/EDGE.
Change to DMC Intercom mode.
Refer to the pairing screen on Insta360 ACE/ACE PRO/X4, then select Packtalk PRO/EDGE again.
Tap the intercom button three times.
Start recording.

Step-by-Step Connection Guide

STEP 1: Prepare Cardo Device

Shows the Cardo PACKTALK PRO/EDGE device. Two buttons are highlighted, with a 5-second timer icon next to them, indicating a duration or action.

Press and hold the two highlighted buttons on the Cardo PACKTALK PRO/EDGE for 5 seconds [⏱️ 5s].

STEP 2: Initiate Pairing on Cardo

Shows the Cardo device with a finger pressing one of the highlighted buttons. A 5-second timer icon is present.

Press the indicated button on the Cardo device [✋].

STEP 3: Configure Insta360 Camera

Shows the screen of an Insta360 ACE PRO camera. Icons for volume (speaker with 'x'), Wi-Fi (signal bars), settings (gear), microphone, and Bluetooth (headset with signal) are visible.

On the Insta360 ACE PRO, navigate to the settings or connection menu. Look for Bluetooth [?] and Wi-Fi [?] options.

STEP 4: Cardo Device Action

Shows a hand pressing two buttons on the Cardo device. A 5-second timer icon is present.

Press and hold the two buttons on the Cardo device for 5 seconds [⏱️ 5s].

STEP 5: Connect via Bluetooth

Shows the screen of an Insta360 device displaying "Bluetooth headphones" and "My Device" with a connection icon.

On the Insta360, select 'Bluetooth headphones' and find 'My Device' to establish the connection [?].