User Manual for Shenzhen Yifeng Intelligent Technology models including: M6A, 2AXY5-M6A, 2AXY5M6A, M6 3 in 1 Magnetic Wireless Charging Station, M6, 3 in 1 Magnetic Wireless Charging Station, Magnetic Wireless Charging Station, Wireless Charging Station, Charging Station
Shenzhen Yifeng Intelligent Technology Co., Ltd. M6A 2AXY5-M6A 2AXY5M6A m6a
File Info : application/pdf, 1 Pages, 1.61MB
DocumentDocument3 in 1 Magnetic Wireless Charging Station Thank you for purchasing the Our 3-in-1 Magnetic Wireless Charger (M6).Read this manual carefully before use, and retain it for future reference. Product Overview1 10W(Max) Wireless Charging Optimized for iPhone Specification: Product interface: type-C Material: ABS+Stainless steel Input : 9V2A 12V1.5A Apple watch output power: 3W(Max) Airpods charging power: 5W(Max) Apple phone charging power: 10W(Max) Product color: black/white 3W(Max) Integrated Apple Watch Charger Compatible Devices: ciPhone 14/13/12 mini/Plus/Pro/Promax cApple Watch 8/Ultra/SE 2/7/6/SE/5/4/3/2. cAirPods 2/3/Pro/Pro 2 5W(Max) Wireless Charging Tray for AirPods LED Charging Indicator (Automatically turns off after 20 seconds.) FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. This device was tested for typical mobile type device operations. To comply with R F exposure requirements, a minimum separation distance of 20cm must be maintained between the user's body and the handset, including the antenna. Third party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. mobile type device accessories that do not meet theserequirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive (RED) SI 2017 No.1206. All essential radio test suites have been carried out. 1. The device complies with RF specifications when the device used at 20cm form your bodyAdobe PDF library 15.00 Adobe Illustrator(R) 17.0