Instruction Manual for bouncepad models including: BP-LINKIPAD10B Adjustable Tablet Kiosk Ergonomically Flex, BP-LINKIPAD10B, Adjustable Tablet Kiosk Ergonomically Flex, Tablet Kiosk Ergonomically Flex, Kiosk Ergonomically Flex, Ergonomically Flex, Flex
Bouncepad BP-LINKIPAD10B
Bouncepad BP-LINKIPAD789T
Bouncepad BP-LINKIPAD10W
LINK Assembly Instructions Tools Required to Fix From Above: Pencil Drill + drill bits 16mm Hole Saw Sheet Code: BP-IM-074_REV2 Release Date: 08/04/2022 Copyright 2022 Spotspot Ltd. (T/A Bouncepad) all rights reserved. Confidential, no part of this publication may be reproduced or transmitted in any form without the written permission of the copyright holder. Link In the Box back screw cover faceplate 1x tie 1x T10 Pin Torx Allen Key 6x M3 x 6mm Countersunk Pin Torx Screws 4x No.8 Countersunk, Self tapping Screw Fixings Kit 1x Velcro Pad 4x Rawl Plugs Fixings List * Due to the modular nature of our product range you may receive additional fixings in the fixings kit front screw cover 1 Remove Front and Back Screw Covers. 2 Remove Faceplate. 3 Remove Cable Lock. TEXAS POE GAF-Lightning-PD REDPARK Gigabit+PoE Adapter L6-NETPOE BELKIN Ethernet + Power TEXAS POE GAT-USBC-PD 4 Select your PoE device and note it's location in relation to the mounting slots tie Power-Over-Ethernet device (POE) Locate PoE device here with Velcro 5 Insert the tie through the cable slots and then clasp over the POE device. 6 Specifically for Texas PoE GAT-USBPD use velcro pad for attachment 7 Feed the ethernet cable through the cable exit. MOUNT FROM ABOVE Optional (skip to step 8 for freestanding) pencil power drill drill bit Connect the ethernet cable to the 8 POE and secure the cable with the cable lock. A1 Use a pencil to mark pilot hole locations. A2 Use a drill bit suitable for your surface and make 4x pilot holes No.8 Self tapping screw 16mm hole saw If running a ethernet or USB cable A3 through the surface use a hole saw in the cable exit position. Secure the Link to the surface with 4x A4 No.8 Self tapping screws. Rawl plugs are provided if required. Connect the USB cable to the tablet, 9 then place inside the enclosure. Reattach the faceplate. video-conferencing camera TV / PC monitor computer Link 10 11 Use 6x M3 Screws to secure faceplate. Reattach the front and back screw covers Set up the video-conferencing 12 software and peripherals as per the provider's instructions. kensington lock For additional security, tether your 13 Link with a Kensington security cable. *Security cable not provided.Adobe PDF Library 17.0 Adobe InDesign 18.0 (Windows)