The Power of Nature and Renewable Energy in Your Hands
p65warnings.ca.gov
User Manual for Nature POWER models including: 21030, Hanging Solar Shed Light
The 4-LED Solar-Powered Pendant Shed Light provides safety and security with the added benefit of remote control convenience. No electricity is required, making this light great for garages, sheds, barns and any area where electricity is unavailable or difficult to access. The included remote
The warnings, cautions, and instructions in this manual cannot cover all ... The 4-LED Solar-Powered Pendant Shed Light provides safety and security with ...
The 4-LED Solar-Powered Pendant Shed Light provides safety and security with the added benefit of remote control convenience. No electricity is required, making ...
File Info : application/pdf, 8 Pages, 2.99MB
DocumentDocumentV1.1-M 1Jun2018 Hanging Solar Shed Light User Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #21030 SAVE THESE INSTRUCTIONS Important Safety Information Thank you for choosing a Nature Power Product. Save the receipt and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This product is designed for certain applications only. the distributor cannot be responsible for issues arising from modification. We strongly recommend this product not be modified and/or used for any application other than that for which it was designed. If you have any question relative to a particular application, Do not use the product until you have first contacted the distributor to determine if it can or should be performed on the product. For technical question please call 1800-588-0590 WARNING x Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage. x The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise common sense and caution when using this tool. Always be aware of the environment and ensure that the tool is used in a safe and responsible manner. x Do not allow persons to operate or assemble the product until they have read this manual and have developed a thorough understanding of how it works. x Do not modify this product in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the product was designed. x Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger industrial equipment. There are certain applications for which this equipment was designed. It will be a safer experience and do the job better at the capacity for which it was intended. DO NOT use this equipment for a purpose for which it was not intended. x Industrial or commercial applications must follow OSHA requirements. WARNING This product can expose you to chemicals, including Di (2-ethylhexyl) phthalate (DEHP) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov ADVERTENCIA Este producto puede exponerlo a productos químicos, incluidos Di (2-etilhexil) ftalato (DEHP) que el estado de California sabe que causa cáncer, defectos de nacimiento u otros daños reproductivos. Para obtener más información, vaya a www.p65warnings.ca.gov Page 2 of 8 Intended Use The 4-LED Solar-Powered Pendant Shed Light provides safety and security with the added benefit of remote control convenience. No electricity is required, making this light great for garages, sheds, barns and any area where electricity is unavailable or difficult to access. The included remote control allows you to activate the light at the touch of a button. Property Lumen Hanging Length Number of LEDs Technical Specifications Specification 250 on bright setting, 60 on low setting Adjustable to maximum of 32 inches 4 Parts List Reference 1 2 3 4 5 6 Part Description Light Solar Panel Remote Control Mounting Screws (pack) Mounting Bracket Owner's Manual Page 3 of 8 Quantity 1 1 1 1 1 1 Assembly Instructions There are two ways to assemble the solar panel. Make sure to install the solar panel close enough to the light so that the wire can reach from the solar panel to its plug in on the lamp. Post or Pole Mounted 1. Carefully remove all the fittings from the box. 2. Setting the bracket screw to solar panel with Screw.(figure 1) 3. Connect "L" shape screw and Bracket for solar panel and "U" Shape Screw.(figure 2) 4. Tumble in the "L" Shape Screw to Pillar and twist the "U" Shape Screw tightly.(figure3) figure1 Wall or Deck Mounted figure2 Figure3 1. Choose the desired location for mounting the solar panel. Use the bracket to mark the four screw holes. You may need to drill into the surface depending on the material the wall or deck is made (figure 4). 2. Attach the bracket to the solar panel with the provided screw (figure 5). 3. Attach the bracket to the wall or deck with the provided screws (figure 6). 4. Adjust the angle of the solar panel to make sure it receives optimal sunlight during the day. Lamp Installation Use the two pre-drilled holes on the ceiling bracket and mark the location. Install the two screws into the holes and attach the ceiling bracket with the two screws. Connection of the Solar Panel and Lamp Insert the plug of the wires into the socket at the side of the ceiling bracket Page 4 of 8 Before Each Use Solar lights require sunlight to function properly. Extended periods of cloudy weather will cause shorter runtimes. Shade on the solar panel is to be avoided. The solar panel may be cleaned with a clean damp cloth. Do not use soap, solvents, or abrasives. Operating Instructions Before the light can operate to its full capacity, allow the unit to charge in sunlight for days with the solar panel wire connected to the light. Charging sho Twist off the glass cover: The light has 3 positions: OFF / AUTO / ON. Switch to the OFF position and the light will stay off. Switch to the AUTO position and the light fixture will be off during the day and turn on at night. The light brightness can be controlled from low light or high light mode with the remote control. Switch to the ON position and the light fixture will stay on day and night . The brightness can be controlled from low light or high light mode with the remote control. 5. Pull the tape out before using the remote control Location of Solar Light Solar powered lights require sunlight to recharge the internal batteries. For best results, locate the solar panel in a position where it will receive direct sunlight, generally free from cover and shade. Page 5 of 8 Maintenance Maintain the solar powered light by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures Maintenance Interval Maintenance Point First Use Allow the solar panel to charge the light for 2 sunny days. Observe the solar panel once installed for one day. Ensure that it is not shaded at any time during daylight. Observe the light once installed during the evening. Ensure there is no alternate light source that will interfere with the light's sensors. Seasonally Visually inspect the solar panel and light to ensure both are clear of debris and dirt. Observe the solar panel during one sunny day to ensure that as the suns position has changed in the sky, the solar panel is still receiving optimal sunlight throughout the day. During the Winter Check the solar panel. Ice should not be allowed to form on the solar panel as the freezing can damage waterproof seals. Adjust the angle of the solar panel to the sun's lower position in the sky. This will maximize the amount of sunlight received and help allow any water or snow that accumulates on the panel to slide off. Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure Possible Cause Batteries are not fully charged. Light does not stay on as long as it did previously or it flashes. Solar panel is not receiving enough sunlight and not able to recharge batteries. It is winter and there is not as much sunlight as during summer, and the solar panel is not able to recharge the batteries. Corrective Action Ensure the solar panel is in a location where it will receive maximum sunlight during daytime hours. Turn the light to the ON position and turn off the light by remote control, allow the solar panel to charge the batteries for 2 sunny days Clean the solar panel with a clean, damp cloth. Ensure the solar panel is located in a place where it will receive the maximum amount of sunlight during the day. Remove any object that throws shade on the solar panel. Tilt the solar panel so that it is perpendicular to the sun. Page 6 of 8 Failure Possible Cause The batteries are not charged. The light does not turn on. The switch is in the wrong position. Corrective Action Ensure the solar panel is in a location where it will receive the maximum sunlight during daytime hours. Turn the light to the ON position and turn off the light by remote control, allow the solar panel to charge the batteries for 2 sunny days Clean the solar panel with a clean, damp cloth. Move the switch to ON or AUTO. In the AUTO position, the light will only turn on when it is dark out. In the ON position, the light will be controlled by the hand-held remote. The rechargeable batteries are at the end of life. There is an alternate light source Replace the batteries with new rechargeable batteries of the same type and size. Battery Replacement For best results batteries should be replaced every 12 months. 1. Remove the glass cover, the plastic battery compartment, and unscrew the screws with a screwdriver. Make sure the new batteries are rechargeable batteries of the same type and size. 2. Install the new batteries into the battery compartment, ensuring the correct polarity is observed. 3. Reassemble the unit by replacing the screws, the battery compartment, and the glass cover. Daylight or other light may be affecting the sensor of the light when in position AUTO. Switch to ON to control the light with the hand-held remote. Page 7 of 8 Limited Warranty Nature Power warrants our products to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from date of purchase. In the case of product defect, contact Nature Power customer service to receive troubleshooting. If defective part or unit should be returned, a Return Authorization Number must be issued by Nature Power and the defective part or unit should be returned to the authorized location at the purchasers' expense. A dated proof of purchase is required to receive warranty service. Once received at authorized location and defect proves to be the result of defective material and workmanship, the defective part or unit will be replaced at warrantors' option and returned to the original purchaser at warrantors' expense. No refunds will be granted by the warrantor, in the event of buyer's remorse please contact your point of purchase within and in adherence to their return policy. Refunds are granted at the retailers' discretions. Please contact Nature Power Products to acquire more information: 1-800-588-0590 info@naturepowerproducts.com www.naturepowerproducts.com Made in China Page 8 of 8