Ampeg
Ampeg
Login • Instagram
User Guide for Ampeg models including: Opto Comp Analog Optical Compressor, Comp Analog Optical Compressor, Analog Optical Compressor, Optical Compressor, Compressor
1 day ago — Quick Start Guide. Page 2. Standard. Setup. What's in the Box. Opto Comp Analog Optical Compressor Pedal, Quick Start Guide. Hookup Diagrams. Page 3. PA/ ...
il y a 20 heures — retrieve a full-version, printable OWNER'S MANUAL. (English only) for your product. (3) ...REGISTER your product. (4) ...CONTACT Technical Support, or call ...
File Info : application/pdf, 6 Pages, 1.12MB
DocumentDocumentOpto Comp Analog Optical Compressor Quick Start Guide What's in the Box Opto Comp Analog Optical Compressor Pedal, Quick Start Guide. Hookup Diagrams Standard Setup PA/Recording Setup 9 4 5 6 2 1 10 3 7 8 3 Front, Rear, Side and Bottom Panel Descriptions 1. Input: Connect a passive or active instrument to this Input jack. 2. Output: Feeds the signal to an external power amplifier, mixer, or recording setup. 3. On/Off Switch: Turns the pedal on/off. The LED indicates on/off status. 4. Compression: Controls the overall amount of compression applied to a signal. 5. Release: Determines how long it takes for the compressor to end gain reduction. 6. Output Level: Adjusts the overall output level. 7. Gain Reduction LED: This LED increases in brightness as gain reduction increases. 8. Power: Input socket for optional AC/DC power supply. 9. Battery (not included): Provides 9V of power (acces- sible by removing the four screws on the bottom panel). 10. Pad: Reduces input level by 15 dB. Getting Started 1. Read and understand the included "Important Safety Instructions." 2. Make all initial connections with the power switches OFF on all equipment. Make sure the Master Volume, Level and Gain controls are all the way down. 3. Insert 9V battery or connect optional AC/DC power supply. The Opto Comp Compressor may accept the appropriate voltage as indicated on the rear panel. 4. Connect an instrument to the Input jack with a 1/4" (shielded) instrument cable. 5. While playing the instrument, adjust the Output Level knob to the preferred level. 6. Adjust the Compression and Release knobs to taste. Technical Specifications Signal-to-Noise Ratio (100 Hz @ 1.00V RMS) Maximum Gain 82 dB +14 dB Power Requirements Size (H x W x D) Weight Internal: 9V Battery External: 9V DC, 25mA 2.2 x 2.6 x 4.5 in 56 x 66 x 114 mm 0.6 lb / 0.3 kg All specifications subject to change WARRANTY AND SUPPORT Visit WWW.AMPEG.COM to... (1) ...identify WARRANTY coverage provided in your local market. Please keep your sales receipt in a safe place. (2) ...retrieve a full-version, printable OWNER'S MANUAL (English only) for your product. (3) ...REGISTER your product. (4) ...CONTACT Technical Support, or call 818-575-3600. www.ampeg.com Yamaha Guitar Group, Inc. 26580 Agoura Road, Calabasas, CA 91302-1921 USA Part No. 40-00-0433 Rev. A © 2019 Yamaha Guitar Group, Inc. All rights reserved. Ampeg and the Ampeg logo are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions.