ITC Warranty & Return Policy
Installation Guide for ITC models including: 690471 Compel Linear Light, 690471, Compel Linear Light, Compel Light, Linear Light, 690471 Light, Light
Index of /files/resources/
File Info : application/pdf, 1 Pages, 211.61KB
DocumentDocumentCompelTM Linear Light Part#: 690471 PARTS/TOOLS NEEDED: INSTALLATION INSTRUCTIONS Compel Light Mounting Clips & Screws Butt Splice Connectors (Not Provided) General Considerations · Disconnect power before installing, adding or changing any component. · To avoid a hazard to children, account for all parts and destroy all packing materials. · Do not install any luminaire assembly closer than 6" from any combustible materials. · Max voltage: 12V DC ± 20% · Operating temperature: -20° to 50°C · Dimmable: 10% to 100% · Product is designed for interior use only Power Drill 1. Determine the installation location and mark the clip locations. Drill pilot holes and screw in the mounting clips using the provided screws. Hole Sized for #6 Screw 0.25 12.00 2. Using the wiring diagram below, wire the light to the units power. Compel Incoming 12V DC Power Black (-) 12V DC (+) Black (-) Red (+) 3. Snap light into mounting clips. 3030 Corporate Grove Dr. Hudsonville, MI 49426 Phone: 616.396.1355 itc-us.com For warranty information please visit www.itc-us.com/warranty-return-policy DOC #: 710-00027 · Rev A · 06/27/17 Page 1 of 1