Global Industrial Battery Powered Office Lift Truck

Safety Warnings

WARNING:

• Do not stand, sit, climb, or transport personnel on the lift.
• Use the lift only on level, smooth, durable surfaces away from traffic.
• Do not exceed the rated capacity of 220 lbs.
• A low buzzer will sound when the battery is low.
• Connect the AC power cord to a 110V power outlet for charging.
• Protect all extremities, including hands, feet, and other body parts, while operating or transporting the lift.
• Inspect the lift truck prior to use. Do not operate if damaged or in poor condition.
• Do not modify or alter the unit. Modifications may cause improper functionality, resulting in possible injury or death. Do not operate the unit with ANY aftermarket accessories.
• Do not repair or perform unit maintenance if forks or platform are raised or loaded.
• All personnel must remain clear of the lift while in motion.
• Verify even distribution and stability of loads prior to handling. DO NOT handle unsecured loads.
• Verify travel and work areas are clear of obstructions.
• Verify overhead clearance prior to raising or transporting loads.
• Do not mishandle or abuse the unit in any manner.

The warnings, precautions, and instructions discussed cannot cover all possible conditions and situations that may occur. Failure to heed these warnings may result in property damage, personal injury, and/or death.

Please read and understand all instructions and safety warnings prior to using this device. Operators must be qualified, trained, and use caution when operating this unit. All parties must follow proper safety procedures and precautions at all times.

Operation

• Lock wheels and turn power on.
• Verify unit platform stability prior to handling and transporting loads, or when used as a workstation.
• Use the up or down button on the panel to set the platform at the desired height for loading or unloading.
• The platform should be lowered to the lowest position before moving the office lift truck.
• Lock wheels when maneuvering loads on/off the platform.

Diagram Description: The diagram shows the wheel lock mechanism, limit switches (up and down), power supply switch, power indicator, charging status indicators (low and charging), the 110V charging power cord, and the up/down lift control.

Battery

When the battery is low, a buzzer will sound. The battery should be charged when the buzzer sounds. Turn the power switch off, and connect the AC power cord to a 110V power outlet. The red status indicator will light up while in charging mode. The green status indicator will light up to show the battery cell is low and needs charging. When the green indicator fades, it means the cell is fully charged. Generally, the charging period takes 10-12 hours.

Capacities

WARNING 220 lbs. MAXIMUM RATED CAPACITY

Note: Maximum load must be uniformly distributed.