Right Weigh | Onboard Load Scales
Installation Guide for RW models including: 201-EBT-20B Spring Suspension Digital Load Scale, 201-EBT-20B, 201-EBT-20B Load Scale, Spring Suspension Digital Load Scale, Suspension Digital Load Scale, Digital Load Scale, Digital Scale, Load Scale, Scale
Manuals & Resources - Right Weigh
Title: PP-003-0054 REV C - 201-EBT-20B Installation Overview Created Date: 3/16/2022 3:17:27 PM
File Info : application/pdf, 1 Pages, 175.39KB
DocumentDocumentINSTALLATION OVERVIEW 201-EBT-20B This installation overview is not a substitute for reading the product manuals WHAT'S INCLUDED 1 x 201-217-30 - Gauge and mounting bracket 2 x 218-SK - Weld strain sensor installation kit Scan here to see additional resources on our website including full installation manuals, quick set up guides, and video tutorials! SENSOR CONFIGURATION ON/OFF MENU i ENTER 1 2 3 4 C/H C/L - KG LBS CALIBRATE 1C 2C HIGH LOW www.rwls.com 3 4 HOLD 3 SECONDS EL-003-0004 The gauge should be set to detect 2 Spring Sensors. See Spring Suspension Gauge manual for more information on how to set the sensor configuration. APPLICATIONS Trailer Axle Group: Tandem Axle Sensor Location: The gauge should be mounted and installed on the trailer and the strain sensors should be mounted on the top, center of each trailer axle with sensor "A" mounted on the front axle. See 218-SK manual for more information on how to install the strain sensors. A B A B Mode: Set the gauge to Average (AVG) mode to see a single weight for the axle group. Set the gauge to Independent (IDP) mode to see separate weights for each axle. See Spring Suspension Gauge manual for information on how to set the mode. CONTACT US! Right Weigh, Inc. (888) 818-2058 www.rwls.com support@rwls.com Follow Us! PP-003-0054 REV C