Yeelight Smart LED Filament Bulb YLDP23YL
Brand: Yeelight
Model: YLDP23YL
Product Features
- Adjustable Brightness
- Multiple Lighting Scenarios
- Night Light functionality
- On/Off Timer
- Energy Saving
- Smart & App Control
- Scheduled Shutdown
- Firmware Updates
Technical Specifications
| Feature | Specification |
|---|---|
| Model | YLDP23YL |
| Luminosity | 500lm |
| Rated Power | 6W |
| Base | E27 |
| Rated Input | 220V-240V~50/60Hz 0.04A |
| Color Temperature | 2000K |
| Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4GHz |
| Frequency Bands | 2400MHz-2483.5MHz |
| Lifespan | Approx. 25,000 hours |
| Dimensions | 64×64×158mm |
Installation Instructions
1. Install the Bulb: Install the bulb and turn on the power.
Notes:
- Ensure power is turned off when installing, removing, or inspecting the bulb.
- Do not use this product with a dimmer (e.g., a desk lamp with a built-in dimmer) as it may cause damage.
- Do not use this device in humid environments.
- Avoid using the bulb in narrow, poorly ventilated lampshades, as this may reduce Wi-Fi signal and cause heat dissipation problems.
2. Download the Application: Search for "Yeelight" in your device's app store or scan the provided QR code to download the Yeelight app.
[QR Code]
3. Use the App: Open the application and follow the on-screen instructions. Ensure your Wi-Fi network is available and correctly allows device access.
Apple HomeKit Smart Control
For control of this device, iOS 9.0 or later is recommended.
- Open the "Home" app on your iPhone or iPad.
- Tap "Add Accessory" and follow the on-screen instructions. You will need to scan the QR code associated with the device located on the base of the bulb or enter the 8-digit setup code to allow the Apple Home app access to control the device.
Important: HomeKit codes are required for reset every time. The HomeKit code is located on the base of the product or on the last page of the instruction manual and should be kept safe. In case of factory reset, the association code will need to be re-entered.
Apple, iPad, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
Factory Reset
Use the light switch to turn the light bulb on and off five times consecutively (on for two seconds, off for two seconds). After this operation, the bulb will be in breathing mode. After 5 seconds, it will automatically reset itself, indicating that the light bulb has been restored to its factory settings.
Troubleshooting
- Cannot control the bulb via app though connected to the internet correctly: Ensure the Wi-Fi network is stable and the device is within range.
- Bulb does not turn on when connected to electrical network: Check the power connection and ensure voltage compatibility.
- Bulb flashes abnormally: This may indicate a connection issue or a problem with the bulb's firmware. Try performing a factory reset.
- Some colors are missing: Check the color settings in the app or contact support if the issue persists.
- Malfunctions that affect use or compromise user safety due to product conformity (excluding user-caused damage): Please contact customer support.
Warnings and Safety Precautions
- Before using the product, verify that the mains voltage is compatible with the bulb's voltage. Using different voltages than specified could damage the product and create safety risks.
- Do not disassemble the product. The luminous diodes can cause permanent damage to the eyes.
- The bulb heats up during use. Do not use it in an enclosed holder for a long period of time. Ensure sufficient ventilation for the bulb to allow heat dissipation.
- The optical radiation of this LED lighting product conforms to the "Exemptions and Requirements" of IEC 62471-2006.
- For indoor use only.
- Disconnect from the electrical network to prevent the risk of electric shock.
- Use in a dry/non-humid environment.
- The light source of this product is a non-replaceable LED.
- This device is not intended for use for emergency exits, nor is it intended for emergency lighting.
- Use only the instructions provided or specified in these instructions to control the bulb. This bulb will not function correctly if connected to a standard dimmer (incandescent).
- Pay particular attention when using the Yeelight bulb as a replacement for other bulbs with a significantly different weight. The change in weight may reduce the mechanical stability of certain lighting fixtures and lamp holders, and may compromise the quality of electrical contacts and the longevity of the lamp.
EU Declaration of Conformity & WEEE Disposal
EU Declaration of Conformity: The company Qingdao Yeelink Information Technology Co.,Ltd. hereby declares that this product is in compliance with all relevant European Directives and Regulations, as amended.
WEEE Disposal: Please dispose of this product correctly. Please respect local regulations regarding waste disposal. The symbol shown indicates that used electrical appliances must be taken to a specialized waste disposal center and not disposed of with ordinary waste. To prevent possible damage to the environment or people from uncontrolled waste disposal, it is necessary to recycle it responsibly and promote the sustainable reuse of resources. For the disposal of used products, use the collection and disposal network or contact the retailer from whom the product was purchased. The retailer can take back this product for environmentally safe recycling.
