MiJia Panorama Camera
Device Introduction
This document provides an introduction to the MiJia Panorama Camera.
Package Contents
- MiJia Panorama Camera
- Data cable
- Tripod
- Protective pouch
- User manual
- Warranty card
About the Manufacturer
Customer: Xiaomi Communication Technology Co., LTD.
Manufacturer: Beijing Fengjing Technology Co., LTD. (Xiaomi Eco-chain Enterprise)
Address: Beijing City, Shijingshan District, Shixingda Street 30, Building 17, 4th Floor, 80
Online Support: www.mi.com/service
Hotline: 400-100-5678
For more information about this product, please visit the sales website: www.mi.com
Camera Components
The camera features the following components:
- Microphone Port
- Shutter/Confirm Button
- Wi-Fi Button
- Memory Card Slot and USB Charging Port
- Wi-Fi Indicator
- Power/Mode Button
- Lens
- Photo Indicator
- Video Indicator
- Sound Output Port
- Tripod Mount Thread
- Charging Contact
- Tripod Lock Slot
Camera Functions Introduction
-
Power On/Off
To turn on: Briefly press the Power/Mode button. The photo and video indicators will light up simultaneously. The camera is on when the current mode indicator is lit.
To turn off: Press and hold the Power/Mode button until the current mode indicator turns off.
-
Switching Between Photo and Video Modes
Briefly press the Power/Mode button to switch between photo and video modes. The default mode is video recording.
-
Video Recording
In video mode, when the video indicator is solid blue, briefly press the Shutter/Confirm button to start recording. The video indicator will flash slowly (red). Pressing the Shutter/Confirm button again will stop recording, and the video indicator will flash quickly 3 times and then turn solid blue.
-
Time-lapse Photo
In photo mode, press and hold the Shutter/Confirm button to start a time-lapse photo. The photo indicator will flash slowly (red). After 10 seconds, the camera will automatically stop. The time-lapse duration can be adjusted via the mobile app.
-
Taking Photos
In photo mode, the photo indicator is solid blue. Briefly press the Shutter/Confirm button to take a photo; the photo indicator will flash once.
-
Resetting Wi-Fi Password
Press and hold the Wi-Fi button for 5 seconds to reset the Wi-Fi password.
-
Battery Indicator
A) When the charger is disconnected: Low battery warning: the battery indicator will flash red slowly.
B) When the charger is connected: While charging: the battery indicator is solid red. Charging complete: the battery indicator is solid blue.
-
Standby Mode
If no operations are performed for 120 seconds, the camera will enter standby mode, indicated by a slowly flashing blue battery indicator. Press any button to wake the camera from standby.
-
Video Recording with Remote Control
Using the separately supplied remote control, you can control video recording up to 30 meters away from the camera.
Mobile App and Connection
Download and Install the Mobile App
Search for 'MiJia Panorama Camera' in the App Store or Google Play Store to download the MiJia Panorama Camera mobile app.
Connecting to the Camera
- Download and install the MiJia Panorama Camera mobile app.
- Briefly press the Wi-Fi button to enable the camera's Wi-Fi module. The Wi-Fi indicator will turn solid blue.
- Open the MiJia Panorama Camera mobile app, tap the 'Camera' button on the bottom of the screen, and follow the on-screen instructions to connect.
- The default camera password is: 12345678.
Camera Care
- Extreme weather conditions may temporarily reduce camera functionality or activate the auto-off feature.
- Avoid using the camera in environments with sudden changes in temperature or humidity, as condensation may form on or inside the camera. If condensation appears, immediately open the memory card slot cover to allow moisture to escape.
- When using the camera, do not place it lens-down on rough surfaces (e.g., soil) to prevent lens scratches.
Warranty Service and Support
Warranty service for the MiJia Panorama Camera is provided in accordance with the PRC Law on Protection of Consumer Rights and the PRC Law on Product Quality, including:
- Within 7 days of receiving the product, if malfunctions listed in the 'Characteristic Malfunctions Table' occur and are confirmed by the Xiaomi service center, a free return or replacement will be provided.
- Within 8 to 15 days of receiving the product, if malfunctions listed in the 'Characteristic Malfunctions Table' occur and are confirmed by the Xiaomi service center, a free replacement or repair will be provided.
- Within 12 months of receiving the product, if malfunctions listed in the 'Characteristic Malfunctions Table' occur and are confirmed by the Xiaomi service center, free repair will be provided. If accessories (data cable and tripod) are faulty through no fault of the user, and this is confirmed by the Xiaomi service center, free repair will be provided.
- To receive warranty service, present the valid sales receipt from the seller, including the device's serial number, and the warranty card.
- The device's serial number must be verified by Xiaomi's service department and must fully match the serial number of the service channel.
Non-Warranty Cases
- Unauthorized repair, improper use, impact, negligence, incorrect operation, liquid damage, accidents, modifications, use of non-standard accessories, tampering with labels.
- Malfunctions occurring after the warranty period.
- Damage caused by force majeure events.
- Malfunctions not listed in the 'Characteristic Malfunctions Table'.
- User-caused damage leading to damage of elements listed in the 'Characteristic Malfunctions Table'.
Characteristic Malfunctions
- Power on/off issues.
- Image/sound related malfunctions.
- Indicator related malfunctions.
- Wi-Fi / Bluetooth related malfunctions.
- Button related malfunctions.
- Signal issues.
- Battery related malfunctions.
Declared Content of Hazardous Substances
This table declares the content of hazardous substances in components, in accordance with the provisions of SJ / T 11364.
| Component Name | Pb | Hg | Cd | CRVI | PBB | PBDE |
|---|---|---|---|---|---|---|
| Housing Parts | O | O | O | O | O | O |
| PCB Board | O | O | O | O | O | O |
| Camera Lens Parts | O | O | O | O | O | O |
| Sound Indicator and Microphone | O | O | O | O | O | O |
| Screws | O | O | O | O | O | O |
| Buffer Pads and other small structural components | O | O | O | O | O | O |
O: The content of this hazardous substance in all homogeneous materials of this component is within the limits of GB / T26572 requirements.
X: The content of this hazardous substance in at least one of the homogeneous materials of this component exceeds the limits of GB / T26572 requirements.
Technical Specifications
| Product Name | MiJia Panorama Camera | ||
| Product Model | QJTZ01FJ | ||
| Product Dimensions | 78.00 x 67.40 x 24.03 mm | ||
| Device Weight | 108.3 g | ||
| Device Power Consumption | 3.8 W | ||
| Storage Temperature | -20 – 45°C | ||
| Storage Relative Humidity | 10% – 90% | ||
| Max. Photo Resolution | 6912 x 3456 | ||
| Max. Video Resolution | 3456 x 1758 | ||
| Wireless Connection | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz and Bluetooth 4.0 | ||
| Data Storage | Micro SD Class 10 or higher (for video with max resolution, use Micro SD U3 cards from leading brands) up to 128 GB | ||
| Mobile Device Support | Based on Android 5 / iOS 8 and above | ||
| CMIIT ID | 2016DP6594 | ||
| Manufactured According to | Q/Madv0001-2016 | ||
| Power Adapter Specs | Input: 100-240~50/60 Hz | Output: 5V = 2A | |
| Operating Temperature | -10 – 45°C | ||
| Aperture | F2.0 | ||
| Focal Length | 1.43 mm | ||
| Battery Capacity | 1600 mAh | ||
| Protection Level | IP67 | ||
