VONROC

1. Safety Instructions

Read the enclosed safety warnings, additional safety warnings, and instructions. Failure to follow them may result in electric shock, fire, and/or serious injury. Save for future reference.

Symbols Used:

• [Read User Manual]: Indicates risk of personal injury, death, or damage to the tool if instructions are not followed.
• IP44: Protection class IP44.
• [Overheating Warning]: Do not cover the lens while operating the work light; this may cause it to overheat.
• [Disposal Warning]: Do not dispose of the product in unsuitable containers.
• CE: The product is in accordance with applicable safety standards in European directives.

Safety Warnings for Work Light:

• Please read and observe all safety warnings and instructions enclosed with the battery or power tool.
• Do not work with the rechargeable work light in hazardous areas.
• After automatic shut-off, do not continue to press the On/Off button; recharge the work light first.
• Do not direct the light beam at persons or animals, and do not stare into the light beam yourself (not even from a distance).
• Do not cover the lens while operating; the work light heats up and can cause burns if heat accumulates.
• Do not use the rechargeable work light in road traffic; it is not approved for this purpose.
• Do not allow children to use the work light. It is intended for professional use. Children can unintentionally blind themselves or others.

2. Machine Information

Intended Use

The rechargeable work light is intended for mobile illumination in limited space and for limited time in dry indoor areas. It is not suitable for general room lighting. The work light is equipped with a USB power output for powering or charging USB compatible mobile devices.

Technical Specifications

Description (Parts Identification)

The numbers in the text refer to the diagrams on page 2.

• 1. LED light
• 2. Power button
• 3. USB output
• 4. USB input
• 5. Charge level indicator
• 6. Foldable stand
• 7. Tripod mount
• 8. USB charging cable
• 9. USB Micro-B connector
• 10. USB A connector

3. Operation

The rechargeable work light must be charged before first use.

Charging

Use the supplied USB cable (8) to charge the work light.

• Insert the USB Micro-B connector (9) into the USB input (4).
• Insert the USB A connector (10) into a suitable USB power outlet (e.g., USB wall adapter or computer USB port).
• Observe the charge level indicator (5) to monitor charging. The indicator blinks when charging is in progress.

Power Button

• When the light is ON, press the power button (2) to cycle through operating modes: Full brightness, 50% brightness, SOS flashing pattern, Strobe flashing pattern, Light off.
• When the light is OFF, press the power button (2) once to activate the charge level indicator (5). The indicator shows battery status for a few seconds. Press again to turn the light ON and cycle through modes.

USB Power Bank Function

The work light can be used as a power bank to power or charge other USB compatible devices via the USB output (3). The power button (2) and chosen operating mode do not affect the USB output. The USB output is always active if the internal battery has sufficient charge.

To use the power output, find a suitable USB cable and plug the USB A connector into the USB output (3). Plug the other end into the target device. The charge level indicator (5) will light up automatically to signal activation.

4. Maintenance

Always switch off the work light before cleaning and maintenance.

Clean regularly with a soft cloth. Remove persistent dirt with a damp cloth and mild detergent. Never use solvents or aggressive cleaning products (gasoline, alcohol, ammonia, etc.) as they cause irreparable damage to synthetic components.

5. Environment

Faulty and/or discarded electrical or electronic apparatus must be collected at appropriate recycling locations.

For EU countries: Do not dispose of power tools into domestic waste. According to European Guideline 2012/19/EC, unusable power tools must be collected separately and disposed of in an environmentally friendly way.

6. Warranty

VONROC products are developed to the highest quality standards and are guaranteed free of defects in materials and workmanship for the legally stipulated period from original purchase. Contact VONROC directly for failures.

Exclusions from Guarantee:

• Repairs or alterations by unauthorized service centers.
• Normal wear and tear.
• Abuse, misuse, or improper maintenance.
• Use of non-original spare parts.

This is the sole warranty. VONROC is not liable for incidental or consequential damages. Dealer remedies are limited to repair or replacement. Product and manual are subject to change without notice.